Debian下配置bumblebee+bbswitch配置双显intel+nvidia
2018-04-03 00:00
405 查看
系统: Debian9(Stretch)
显卡: GTX 1050 + intel
参照Debian官网: https://wiki.debian.org/Bumblebee/
bumblebee.conf
xorg.conf.nvidia
配置bbswitch
可能由于我环境问题, 登陆后, 界面卡死,鼠标键盘无响应,连tty都切不进去
这里我采取了一个笨方法
本文可能不兼容所有机型, 如遇问题, 请卸载bumblebee
显卡: GTX 1050 + intel
参照Debian官网: https://wiki.debian.org/Bumblebee/
sudo dpkg --add-architecture i386 sudo apt update sudo apt install bumblebee-nvidia primus primus-libs:i386 sudo apt install virtualgl sudo adduser $USER bumblebee
bumblebee.conf
# Configuration file for Bumblebee. Values should **not** be put between quotes ## Server options. Any change made in this section will need a server restart to take effect. [bumblebeed] # The secondary Xorg server DISPLAY number VirtualDisplay=:8 # Should the unused Xorg server be kept running? Set this to true if waiting # for X to be ready is too long and don't need power management at all. KeepUnusedXServer=false # The name of the Bumbleblee server group name (GID name) ServerGroup=bumblebee # Card power state at exit. Set to false if the card shoud be ON when Bumblebee server exits. TurnCardOffAtExit=true # The default behavior of '-f' option on optirun. If set to "true", '-f' will be ignored. NoEcoModeOverride=false # The Driver used by Bumblebee server. If this value is not set (or empty), # auto-detection is performed. The available drivers are nvidia and nouveau # (See also the driver-specific sections below) Driver=nvidia # Directory with a dummy config file to pass as a -configdir to secondary X XorgConfDir=/etc/bumblebee/xorg.conf.d # Xorg binary to run XorgBinary=/usr/lib/xorg/Xorg ## Client options. Will take effect on the next optirun executed. [optirun] # Acceleration/ rendering bridge, possible values are auto, virtualgl and primus. Bridge=auto # The method used for VirtualGL to transport frames between X servers. # Possible values are proxy, jpeg, rgb, xv and yuv. VGLTransport=proxy # List of paths which are searched for the primus libGL.so.1 when using # the primus bridge PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus:/usr/lib/primus:/usr/lib32/primus # Should the program run under optirun even if Bumblebee server or nvidia card is not available? AllowFallbackToIGC=false # Driver-specific settings are grouped under [driver-NAME]. The sections are # parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto- # detection resolves to NAME). # PMMethod: method to use for saving power by disabling the nvidia card, valid # values are: auto - automatically detect which PM method to use # bbswitch - new in BB 3, recommended if available # switcheroo - vga_switcheroo method, use at your own risk # none - disable PM completely # https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods ## Section with nvidia driver specific options, only parsed if Driver=nvidia [driver-nvidia] # Module name to load, defaults to Driver if empty or unset KernelDriver=nvidia-current PMMethod=bbswitch # colon-separated path to the nvidia libraries LibraryPath=/usr/lib/x86_64-linux-gnu/nvidia:/usr/lib/i386-linux-gnu/nvidia:/usr/lib/nvidia # comma-separated path of the directory containing nvidia_drv.so and the default Xorg modules path XorgModulePath=/usr/lib/nvidia/nvidia,/usr/lib/xorg/modules XorgConfFile=/etc/bumblebee/xorg.conf.nvidia ## Section with nouveau driver specific options, only parsed if Driver=nouveau [driver-nouveau] KernelDriver=nouveau PMMethod=auto XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
xorg.conf.nvidia
Section "ServerLayout" Identifier "Layout0" Option "AutoAddDevices" "false" Option "AutoAddGPU" "false" EndSection Section "Device" Identifier "DiscreteNvidia" Driver "nvidia" VendorName "NVIDIA Corporation" BusID "PCI:01:00:0" Option "NoLogo" "true" Option "UseEDID" "false" Option "UseDisplayDevice" "none" EndSection Section "Screen" Identifier "Default Screen" Device "DiscreteNvidia" EndSection
配置bbswitch
# 创建/etc/modprobe.d/bbswitch.conf echo "options bbswitch load_state=0 unload_state=1" > /etc/modprobe.d/bbswitch.conf # 创建/etc/modules-load.d/bbswitch.conf echo "bbswitch load_state=0" > /etc/modules-load.d/bbswitch.conf # 创建/etc/init/bbswitch.conf # 以下是/etc/init/bbswitch.conf文件内容 """ description "Save power by disabling nvidia on Optimus" author "Lekensteyn <lekensteyn@gmail.com>" start on runlevel [2345] stop on runlevel [016] pre-start exec /sbin/modprobe bbswitch load_state=0 unload_state=1 pre-stop exec /sbin/rmmod bbswitch """ # 更新内核 update-initramfs -u
可能由于我环境问题, 登陆后, 界面卡死,鼠标键盘无响应,连tty都切不进去
这里我采取了一个笨方法
# 禁止bumblebee的开机启动 systemctl disable bumblebeed # 进入x后, 手动开启 systemctl start bumblebeed # 正常 optirun -vv glxgears
本文可能不兼容所有机型, 如遇问题, 请卸载bumblebee
apt-get autoremove --purge bumblebee* nvidia* # 如果重启后一直循环登陆, 请重新安装xserver-xorg-input-all apt-get instal xserver-xorg-input-all --reinstall
相关文章推荐
- Archlinux 下Intel + NVIDIA 双显卡3D 游戏配置(dota2@steam)
- (超完整)Linux(debian9)服务器配置tensorflow环境:nvidia驱动、CUDA、cudnn、anaconda
- (Guide) Installing Nvidia + Bumblebee + CUDA for Optimus enabled Laptops
- Debian 配置 Intel PRO/Wireless 3945 和 WiFi Link 4965 设备 (iwlwifi)
- Arch Linux 下Intel + NVIDIA 双显卡3D 游戏配置(dota2@steam)
- 双显卡(Intel+Nvidia)笔记本配置cuda开发环境
- debian intel+nvidia不黑屏安装显卡驱动
- Ubuntu 14.04(64位)+GTX970+CUDA8.0+Tensorflow配置 (双显卡NVIDIA+Intel集成显卡) ------本内容是长时间的积累,有时间再详细整理
- Ubuntu14.04(Nvidia和Intel双显卡)配置NVIDIA cuda7.5+cuDNN+MXnet
- Debian9 双显卡Intel+Nvidia解决方案(Bumblebee)
- Fedora 21 安装 Bumblebee with the NVIDIA proprietary drivers
- Ubuntu 12.04 64位 Intel + Nvidia GT 630M 双显卡切换配置
- Intel Galileo笔记(五)VS配置与编译
- 在Debian上用 Exim配置邮件服务器
- debian wheezy 修改默认配置
- debian iptables配置步骤
- [置顶] 戴尔笔记本双显卡配置nvidia367+cuda8.0+caffe(通用版)
- Debian 6 nvidia显卡驱动安装
- samba的安装与配置(Debian 8.0系统)
- Debian下配置OpenGL