u-boot-2016.05移植：(1)、建立新板并配置，使能正常编译通过

转载地址：http://blog.csdn.net/sinat_24088685/article/details/52060169
(1)、建立新板并配置，使能正常编译通过

移植u-boot-2016.05到JZ2440开发板（在smdk2410基础上修改）： 
1、在include/configs中复制smdk2410.h拷贝为smdk2440.h。 
2、在board/samsung中复制smdk2410文件夹拷贝为smdk2440，进入smdk2440文件夹，将smdk2410.c重命名为smdk2440.c，并将该文件夹下的Makefile文件中smdk2410.o改为smdk2440.o。 
3、修改顶层Makefile文件，添加：

ARCH=arm
CROSS_COMPILE ?= arm-linux-

1
2
4、在configs文件夹下复制smdk2410_defconfig拷贝为smdk2440_defconfig，并将其中的2410替换为2440。 
5、在arch/arm/Kconfig中添加：

config TARGET_SMDK2440
bool "Support smdk2440"
select CPU_ARM920T

1
2
3
4

source "board/samsung/smdk2440/Kconfig"

1
4、经过上面的修改，运行配置命令make smdk2440_defconfig，然后尝试make，出现下面的错误：

include/config.h:5:22: error: configs/.h: No such file or directory

1
2
错误显示：在include/config.h中出现的configs/.h并不能找到，对比编译2410生成的config.h文件，可见是config.h文件生成错误。要解决问题首先我们要找到生成config.h文件的地方，在顶层Makefile文件中找了很久都没找到生成config.h文件的地方，然后就有点无从下手了，偶然想到既然config.h是生成的文件，那么其中的注释

/* Automatically generated - do not edit */

应该是通过echo命令输出到config.h文件的，搜索 

Automatically generated - do not edit

 就应该可以找到生成config.h的地方。 
搜索

Automatically generated - do not edit

，找到scripts/Makefile.autoconf文件，发现config.h正是在它里面生成的：

...

# include/config.h
# Prior to Kconfig, it was generated by mkconfig. Now it is created here.
define filechk_config_h
(echo "/* Automatically generated - do not edit */";            \
for i in $$(echo $(CONFIG_SYS_EXTRA_OPTIONS) | sed 's/,/ /g'); do \
echo \#define CONFIG_$$i                                \
| sed '/=/ {s/=/        /;q; } ; { s/$$/        1/; }'; \
done;                                                           \
echo \#define CONFIG_BOARDDIR board/$(if $(VENDOR),$(VENDOR)/)$(BOARD);\
echo \#include \<config_defaults.h\>;                           \
echo \#include \<config_uncmd_spl.h\>;                          \
echo \#include \<configs/$(CONFIG_SYS_CONFIG_NAME).h\>;         \
echo \#include \<asm/config.h\>;                                \
echo \#include \<config_fallbacks.h\>;)
endef

...

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
由此可见，之所以在config.h中出现configs/.h，是因为CONFIG_SYS_CONFIG_NAME为空的原因。 
参阅doc/README.kconfig文件中建新板步骤：

Tips to add/remove boards
-------------------------

When adding a new board, the following steps are generally needed:

[1] Add a header file include/configs/<target>.h
[2] Make sure to define necessary CONFIG_SYS_* in Kconfig:
Define CONFIG_SYS_CPU="cpu" to compile arch/<arch>/cpu/<cpu>
Define CONFIG_SYS_SOC="soc" to compile arch/<arch>/cpu/<cpu>/<soc>
Define CONFIG_SYS_VENDOR="vendor" to compile board/<vendor>/common/*
and board/<vendor>/<board>/*
Define CONFIG_SYS_BOARD="board" to compile board/<board>/*
(or board/<vendor>/<board>/* if CONFIG_SYS_VENDOR is defined)
Define CONFIG_SYS_CONFIG_NAME="target" to include
include/configs/<target>.h
[3] Add a new entry to the board select menu in Kconfig.
The board select menu is located in arch/<arch>/Kconfig or
arch/<arch>/*/Kconfig.
[4] Add a MAINTAINERS file
It is generally placed at board/<board>/MAINTAINERS or
board/<vendor>/<board>/MAINTAINERS
[5] Add configs/<target>_defconfig

When removing an obsolete board, the following steps are generally needed:

[1] Remove configs/<target>_defconfig
[2] Remove include/configs/<target>.h if it is not used by any other boards
[3] Remove board/<vendor>/<board>/* or board/<board>/* if it is not used
by any other boards
[4] Update MAINTAINERS if necessary
[5] Remove the unused entry from the board select menu in Kconfig
[6] Add an entry to doc/README.scrapyard

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
可见，要正确生成include/config.h文件，需要配置board/samsung/smdk2440/Kconfig文件，将其中的2410改为2440。