Linux上防火墙开放对应的端口
2018-03-07 15:50
253 查看
在Linux上防火墙开放对应的端口的命令如下:
方式一:
命令介绍如下:
/sbin/iptables -I INPUT -p tcp --dport 8011 -j ACCEPT #开启8011端口
/etc/rc.d/init.d/iptables save #保存配置
/etc/rc.d/init.d/iptables restart #重启服务
查看端口是否已经开放
/etc/init.d/iptables status
#######################################################
其他方式:
查看防火墙的状态:
1) 重启后生效
开启: chkconfig iptables on
关闭: chkconfig iptables off
2) 即时生效,重启后失效
开启: service iptables start
关闭: service iptables stop
需要说明的是对于Linux下的其它服务都可以用以上命令执行开启和关闭操作。
在开启了防火墙时,做如下设置,开启相关端口,
修改/etc/sysconfig/iptables 文件,添加以下内容:
-A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 80 -j ACCEPT
-A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT
-----简单的修改,在开启防火墙的情况下。放开对应端口,见下面红色。
# Generated by iptables-save v1.4.7 on Mon Dec 26 16:43:03 2016
*filter
:INPUT ACCEPT [0:0]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [3:420]
-A INPUT -p tcp -m tcp --dport 22 -j ACCEPT
-A INPUT -p tcp -m tcp --dport 8999 -j ACCEPT
-A INPUT -p tcp -m tcp --dport 25 -j ACCEPT
-A INPUT -p tcp -m tcp --dport 8005 -j ACCEPT
COMMIT
# Completed on Mon Dec 26 16:43:03 2016
方式一:
[root@localhost sbin]# /sbin/iptables -I INPUT -p tcp --dport 80 -j ACCEPT [root@localhost sbin]# [root@localhost sbin]# /etc/rc.d/init.d/iptables save iptables: Saving firewall rules to /etc/sysconfig/iptables:[ OK ] [root@localhost sbin]# [root@localhost sbin]# /etc/rc.d/init.d/iptables restart iptables: Setting chains to policy ACCEPT: filter [ OK ] iptables: Flushing firewall rules: [ OK ] iptables: Unloading modules: [ OK ] iptables: Applying firewall rules: [ OK ] [root@localhost sbin]# [root@localhost sbin]# /etc/rc.d/init.d/iptables status Table: filter Chain INPUT (policy ACCEPT) num target prot opt source destination 1 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 2 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 3 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 4 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 5 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:22 6 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:8080 7 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:8099 8 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:50031 9 REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-host-prohibited Chain FORWARD (policy ACCEPT) num target prot opt source destination 1 REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-host-prohibited Chain OUTPUT (policy ACCEPT) num target prot opt source destination [root@localhost sbin]#
命令介绍如下:
/sbin/iptables -I INPUT -p tcp --dport 8011 -j ACCEPT #开启8011端口
/etc/rc.d/init.d/iptables save #保存配置
/etc/rc.d/init.d/iptables restart #重启服务
查看端口是否已经开放
/etc/init.d/iptables status
#######################################################
其他方式:
查看防火墙的状态:
/etc/init.d/iptables status
1) 重启后生效
开启: chkconfig iptables on
关闭: chkconfig iptables off
2) 即时生效,重启后失效
开启: service iptables start
关闭: service iptables stop
需要说明的是对于Linux下的其它服务都可以用以上命令执行开启和关闭操作。
在开启了防火墙时,做如下设置,开启相关端口,
修改/etc/sysconfig/iptables 文件,添加以下内容:
-A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 80 -j ACCEPT
-A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT
这里应该也可以不重启计算机: #/etc/init.d/iptables restart 关闭防火墙服务即可: 查看防火墙信息: #/etc/init.d/iptables status 关闭防火墙服务: #/etc/init.d/iptables stop
-----简单的修改,在开启防火墙的情况下。放开对应端口,见下面红色。
# Generated by iptables-save v1.4.7 on Mon Dec 26 16:43:03 2016
*filter
:INPUT ACCEPT [0:0]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [3:420]
-A INPUT -p tcp -m tcp --dport 22 -j ACCEPT
-A INPUT -p tcp -m tcp --dport 8999 -j ACCEPT
-A INPUT -p tcp -m tcp --dport 25 -j ACCEPT
-A INPUT -p tcp -m tcp --dport 8005 -j ACCEPT
COMMIT
# Completed on Mon Dec 26 16:43:03 2016
一、Linux下开启/关闭防火墙命令
1、永久性生效,重启后不会复原。
开启: chkconfig iptables on
关闭: chkconfig iptables off
2、 即时生效,重启后复原
开启: service iptables start
关闭: service iptables stop
需要说明的是对于Linux下的其它服务都可以用以上命令执行开启和关闭操作。
在当开启了防火墙时,做如下设置,开启相关端口,
修改/etc/sysconfig/iptables 文件,添加以下内容:
-A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 80 -j ACCEPT
-A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT
二、UBuntu关闭防火墙
iptables -A INPUT -i ! PPP0 -j ACCEPT
三、CentOS Linux 防火墙配置及关闭
执行”setup”命令启动文字模式配置实用程序,在”选择一种工具”中选择”防火墙配置”,然后选择”运行工具”按钮,出现防火墙配置界面,将”安全级别”设为”禁用”,然后选择”确定”即可.
或者用命令:
#/sbin/iptables -I INPUT -p tcp –dport 80 -j ACCEPT
#/sbin/iptables -I INPUT -p tcp –dport 22 -j ACCEPT
#/etc/rc.d/init.d/iptables save
这样重启计算机后,防火墙默认已经开放了80和22端口
这里应该也可以不重启计算机: #/etc/init.d/iptables restart 关闭防火墙服务即可: 查看防火墙信息: #/etc/init.d/iptables status 关闭防火墙服务: #/etc/init.d/iptables stop
相关文章推荐
- Linux上防火墙开放对应的端口
- linux下mysql开启远程访问权限及防火墙开放3306端口
- 【Linux】CentOS 7通过Firewall开放防火墙端口
- linux 防火墙开放外网端口命令
- Linux 防火墙开放特定端口
- Linux:centos7防火墙开放端口
- linux下mysql开启远程访问权限及防火墙开放3306端口
- Linux 防火墙开放特定端口 (iptables)
- Linux 防火墙永久开放端口
- LINUX关闭防火墙、开放特定端口等常用操作
- Linux在防火墙中开放SVN端口
- 关于linux防火墙开放端口问题
- [Linux]CentOS 5.5 防火墙开启、关闭以及开放指定端口
- Linux 防火墙开放特定端口
- linux开放端口--防火墙iptables
- Linux 防火墙开放特定端口 (iptables)
- Linux防火墙iptables开放网络端口的方法
- 【Linux】CentOS 7通过Firewall开放防火墙端口
- linux下mysql开启远程访问权限 防火墙开放3306端口
- Linux 防火墙开放特定端口(iptables)