vim编辑器设置
2018-02-25 19:20
253 查看
由于ubantu自带的vi编辑器并不好用,而开发一般使用vim编辑器,vim需要自己安装(sudo apt-get install vim 即可安装),但是默认的设置使用起来很不舒服,因此可以通过修改相关设置来提高vim编辑器的实用性。
下面先给出自己的vim效果图(自己认为还不错
):
下面是配置文件; " .vimrc - Vim configuration file.
"
" Copyright (c) 2010 Jeffy Du. All Rights Reserved.
"
" Maintainer: Jeffy Du <jeffy.du@gmail.com>
" Created: 2010-01-01
" LastChange: 2010-04-22
" GENERAL SETTINGS: {{{1
" To use VIM settings, out of VI compatible mode.
set nocompatible
" Enable file type detection.
filetype plugin indent on
" Syntax highlighting.
syntax on
" Setting colorscheme
color mycolor
" Other settings.
set autoindent
set autoread
set autowrite
set background=dark
set backspace=indent,eol,start
set nobackup
set cindent
set cinoptions=:0
set cursorline
set completeopt=longest,menuone
set noexpandtab
set fileencodings=utf-8,gb2312,gbk,gb18030
set fileformat=unix
set foldenable
set foldmethod=marker
set guioptions-=T
set guioptions-=m
set guioptions-=r
set guioptions-=l
set helpheight=10
set helplang=cn
set hidden
set history=100
set hlsearch
set ignorecase
set incsearch
set laststatus=2
set mouse=a
set number
set pumheight=10
set ruler
set scrolloff=5
set shiftwidth=4
set showcmd
set smartindent
set smartcase
set tabstop=4
set termencoding=utf-8
set textwidth=80
set whichwrap=h,l
set wildignore=*.bak,*.o,*.e,*~
set wildmenu
set wildmode=list:longest,full
set nowrap
" AUTO COMMANDS: {{{1
" auto expand tab to blanks
"autocmd FileType c,cpp set expandtab
" Restore the last quit position when open file.
autocmd BufReadPost *
\ if line("'\"") > 0 && line("'\"") <= line("$") |
\ exe "normal g'\"" |
\ endif
" SHORTCUT SETTINGS: {{{1
" Set mapleader
let mapleader=","
" Space to command mode.
nnoremap <space> :
vnoremap <space> :
" Switching between buffers.
nnoremap <C-h> <C-W>h
nnoremap <C-j> <C-W>j
nnoremap <C-k> <C-W>k
nnoremap <C-l> <C-W>l
inoremap <C-h> <Esc><C-W>h
inoremap <C-j> <Esc><C-W>j
inoremap <C-k> <Esc><C-W>k
inoremap <C-l> <Esc><C-W>l
" "cd" to change to open directory.
let OpenDir=system("pwd")
nmap <silent> <leader>cd :exe 'cd ' . OpenDir<cr>:pwd<cr>
" PLUGIN SETTINGS: {{{1
" taglist.vim
let g:Tlist_Auto_Update=1
let g:Tlist_Process_File_Always=1
let g:Tlist_Exit_OnlyWindow=1
let g:Tlist_Show_One_File=1
let g:Tlist_WinWidth=25
let g:Tlist_Enable_Fold_Column=0
let g:Tlist_Auto_Highlight_Tag=1
" NERDTree.vim
let g:NERDTreeWinPos="right"
let g:NERDTreeWinSize=25
let g:NERDTreeShowLineNumbers=1
let g:NERDTreeQuitOnOpen=1
" cscope.vim
if has("cscope")
set csto=1
set cst
set nocsverb
if filereadable("cscope.out")
cs add cscope.out
endif
set csverb
endif
" OmniCppComplete.vim
let g:OmniCpp_DefaultNamespaces=["std"]
let g:OmniCpp_MayCompleteScope=1
let g:OmniCpp_SelectFirstItem=2
" VimGDB.vim
if has("gdb")
set asm=0
let g:vimgdb_debug_file=""
run macros/gdb_mappings.vim
endif
" LookupFile setting
let g:LookupFile_TagExpr='"./tags.filename"'
let g:LookupFile_MinPatLength=2
let g:LookupFile_PreserveLastPattern=0
let g:LookupFile_PreservePatternHistory=1
let g:LookupFile_AlwaysAcceptFirst=1
let g:LookupFile_AllowNewFiles=0
" Man.vim
source $VIMRUNTIME/ftplugin/man.vim
" snipMate
let g:snips_author="Du Jianfeng"
let g:snips_email="cmdxiaoha@163.com"
let g:snips_copyright="SicMicro, Inc"
" plugin shortcuts
function! RunShell(Msg, Shell)
echo a:Msg . '...'
call system(a:Shell)
echon 'done'
endfunction
nmap <F2> :TlistToggle<cr>
nmap <F3> :NERDTreeToggle<cr>
nmap <F4> :MRU<cr>
nmap <F5> <Plug>LookupFile<cr>
nmap <F6> :vimgrep /<C-R>=expand("<cword>")<cr>/ **/*.c **/*.h<cr><C-o>:cw<cr>
nmap <F9> :call RunShell("Generate tags", "ctags -R --c++-kinds=+p --fields=+iaS --extra=+q .")<cr>
nmap <F10> :call HLUDSync()<cr>
nmap <F11> :call RunShell("Generate filename tags", "~/.vim/shell/genfiletags.sh")<cr>
nmap <F12> :call RunShell("Generate cscope", "cscope -Rb")<cr>:cs add cscope.out<cr>
nmap <leader>sa :cs add cscope.out<cr>
nmap <leader>ss :cs find s <C-R>=expand("<cword>")<cr><cr>
nmap <leader>sg :cs find g <C-R>=expand("<cword>")<cr><cr>
nmap <leader>sc :cs find c <C-R>=expand("<cword>")<cr><cr>
nmap <leader>st :cs find t <C-R>=expand("<cword>")<cr><cr>
nmap <leader>se :cs find e <C-R>=expand("<cword>")<cr><cr>
nmap <leader>sf :cs find f <C-R>=expand("<cfile>")<cr><cr>
nmap <leader>si :cs find i <C-R>=expand("<cfile>")<cr><cr>
nmap <leader>sd :cs find d <C-R>=expand("<cword>")<cr><cr>
nmap <leader>zz <C-w>o
nmap <leader>gs :GetScripts<cr>
配置文件里有几个快捷键还是很舒服的(比如:‘Esc’+'Space' 可以从编辑模式切换到低行模式、 通过配置ab命令来实现自动补全等等)。
下面先给出自己的vim效果图(自己认为还不错
):
下面是配置文件; " .vimrc - Vim configuration file.
"
" Copyright (c) 2010 Jeffy Du. All Rights Reserved.
"
" Maintainer: Jeffy Du <jeffy.du@gmail.com>
" Created: 2010-01-01
" LastChange: 2010-04-22
" GENERAL SETTINGS: {{{1
" To use VIM settings, out of VI compatible mode.
set nocompatible
" Enable file type detection.
filetype plugin indent on
" Syntax highlighting.
syntax on
" Setting colorscheme
color mycolor
" Other settings.
set autoindent
set autoread
set autowrite
set background=dark
set backspace=indent,eol,start
set nobackup
set cindent
set cinoptions=:0
set cursorline
set completeopt=longest,menuone
set noexpandtab
set fileencodings=utf-8,gb2312,gbk,gb18030
set fileformat=unix
set foldenable
set foldmethod=marker
set guioptions-=T
set guioptions-=m
set guioptions-=r
set guioptions-=l
set helpheight=10
set helplang=cn
set hidden
set history=100
set hlsearch
set ignorecase
set incsearch
set laststatus=2
set mouse=a
set number
set pumheight=10
set ruler
set scrolloff=5
set shiftwidth=4
set showcmd
set smartindent
set smartcase
set tabstop=4
set termencoding=utf-8
set textwidth=80
set whichwrap=h,l
set wildignore=*.bak,*.o,*.e,*~
set wildmenu
set wildmode=list:longest,full
set nowrap
" AUTO COMMANDS: {{{1
" auto expand tab to blanks
"autocmd FileType c,cpp set expandtab
" Restore the last quit position when open file.
autocmd BufReadPost *
\ if line("'\"") > 0 && line("'\"") <= line("$") |
\ exe "normal g'\"" |
\ endif
" SHORTCUT SETTINGS: {{{1
" Set mapleader
let mapleader=","
" Space to command mode.
nnoremap <space> :
vnoremap <space> :
" Switching between buffers.
nnoremap <C-h> <C-W>h
nnoremap <C-j> <C-W>j
nnoremap <C-k> <C-W>k
nnoremap <C-l> <C-W>l
inoremap <C-h> <Esc><C-W>h
inoremap <C-j> <Esc><C-W>j
inoremap <C-k> <Esc><C-W>k
inoremap <C-l> <Esc><C-W>l
" "cd" to change to open directory.
let OpenDir=system("pwd")
nmap <silent> <leader>cd :exe 'cd ' . OpenDir<cr>:pwd<cr>
" PLUGIN SETTINGS: {{{1
" taglist.vim
let g:Tlist_Auto_Update=1
let g:Tlist_Process_File_Always=1
let g:Tlist_Exit_OnlyWindow=1
let g:Tlist_Show_One_File=1
let g:Tlist_WinWidth=25
let g:Tlist_Enable_Fold_Column=0
let g:Tlist_Auto_Highlight_Tag=1
" NERDTree.vim
let g:NERDTreeWinPos="right"
let g:NERDTreeWinSize=25
let g:NERDTreeShowLineNumbers=1
let g:NERDTreeQuitOnOpen=1
" cscope.vim
if has("cscope")
set csto=1
set cst
set nocsverb
if filereadable("cscope.out")
cs add cscope.out
endif
set csverb
endif
" OmniCppComplete.vim
let g:OmniCpp_DefaultNamespaces=["std"]
let g:OmniCpp_MayCompleteScope=1
let g:OmniCpp_SelectFirstItem=2
" VimGDB.vim
if has("gdb")
set asm=0
let g:vimgdb_debug_file=""
run macros/gdb_mappings.vim
endif
" LookupFile setting
let g:LookupFile_TagExpr='"./tags.filename"'
let g:LookupFile_MinPatLength=2
let g:LookupFile_PreserveLastPattern=0
let g:LookupFile_PreservePatternHistory=1
let g:LookupFile_AlwaysAcceptFirst=1
let g:LookupFile_AllowNewFiles=0
" Man.vim
source $VIMRUNTIME/ftplugin/man.vim
" snipMate
let g:snips_author="Du Jianfeng"
let g:snips_email="cmdxiaoha@163.com"
let g:snips_copyright="SicMicro, Inc"
" plugin shortcuts
function! RunShell(Msg, Shell)
echo a:Msg . '...'
call system(a:Shell)
echon 'done'
endfunction
nmap <F2> :TlistToggle<cr>
nmap <F3> :NERDTreeToggle<cr>
nmap <F4> :MRU<cr>
nmap <F5> <Plug>LookupFile<cr>
nmap <F6> :vimgrep /<C-R>=expand("<cword>")<cr>/ **/*.c **/*.h<cr><C-o>:cw<cr>
nmap <F9> :call RunShell("Generate tags", "ctags -R --c++-kinds=+p --fields=+iaS --extra=+q .")<cr>
nmap <F10> :call HLUDSync()<cr>
nmap <F11> :call RunShell("Generate filename tags", "~/.vim/shell/genfiletags.sh")<cr>
nmap <F12> :call RunShell("Generate cscope", "cscope -Rb")<cr>:cs add cscope.out<cr>
nmap <leader>sa :cs add cscope.out<cr>
nmap <leader>ss :cs find s <C-R>=expand("<cword>")<cr><cr>
nmap <leader>sg :cs find g <C-R>=expand("<cword>")<cr><cr>
nmap <leader>sc :cs find c <C-R>=expand("<cword>")<cr><cr>
nmap <leader>st :cs find t <C-R>=expand("<cword>")<cr><cr>
nmap <leader>se :cs find e <C-R>=expand("<cword>")<cr><cr>
nmap <leader>sf :cs find f <C-R>=expand("<cfile>")<cr><cr>
nmap <leader>si :cs find i <C-R>=expand("<cfile>")<cr><cr>
nmap <leader>sd :cs find d <C-R>=expand("<cword>")<cr><cr>
nmap <leader>zz <C-w>o
nmap <leader>gs :GetScripts<cr>
配置文件里有几个快捷键还是很舒服的(比如:‘Esc’+'Space' 可以从编辑模式切换到低行模式、 通过配置ab命令来实现自动补全等等)。
相关文章推荐
- crontab -e设置编辑器为vim
- vim编辑器设置Tab键
- vim编辑器如何设置行号、缩进
- vim编辑器设置tab键为
- Centos将vim设置成为C++编辑器
- Vim编辑器设置缩进4字节
- vim 编辑器 常用的设置
- 如何设置显示vim编辑器的行号
- 配置Vim编辑器设置Tab键的格数(长度)
- 关于MacBook电脑vim的配置和设置以及关于vim编辑器的一些快捷键的使用
- Linux Centos下安装与设置Vim编辑器和基本配置
- Centos 下安装与设置VIM编辑器
- vim编辑器代码高亮/显示行号/自动缩进设置
- 设置git使用vim作为编辑器
- vim编辑器设置
- 配置Vim编辑器设置Tab键的格数(长度)
- Vim编辑器设置
- vim编辑器设置
- VIM编辑器设置
- Vim编辑器基本设置总结