foremost命令参数中文说明
2018-02-10 09:27
2031 查看
Foremost是基于文件开始格式,文件结束标志和内部数据结构进行恢复文件的程序。
foremost命令参数英文英文说明:
$ foremost [-v|-V|-h|-T|-Q|-q|-a|-w-d] [-t <type>] [-s <blocks>] [-k <size>]
[-b <size>] [-c <file>] [-o <dir>] [-i <file]
-V - display copyright information and exit
-t - specify file type. (-t jpeg,pdf ...)
-d - turn on indirect block detection (for UNIX file-systems)
-i - specify input file (default is stdin)
-a - Write all headers, perform no error detection (corrupted files)
-w - Only write the audit file, do not write any detected files to the disk
-o - set output directory (defaults to output)
-c - set configuration file to use (defaults to foremost.conf)
-q - enables quick mode. Search are performed on 512 byte boundaries.
-Q - enables quiet mode. Suppress output messages.
-v - verbose mode. Logs all messages to screen
foremost命令参数英文中文说明:
$ foremost [-v|-V|-h|-T|-Q|-q|-a|-w-d] [-t <type>] [-s <blocks>] [-k <size>]
[-b <size>] [-c <file>] [-o <dir>] [-i <file]
-V - 显示版权信息并退出
-t - 指定文件类型. (-t jpeg,pdf ...)
-d -打开间接块检测 (针对UNIX文件系统)
-i - 指定输入文件 (默认为标准输入)
-a - 写入所有的文件头部, 不执行错误检测(损坏文件)
-w - 向磁盘写入审计文件,不写入任何检测到的文件
-o - 设置输出目录 (默认为为输出)
-c - 设置配置文件 (默认为 foremost.conf)
-q - 启用快速模式. 在512字节边界执行搜索.
-Q - 启用安静模式. 禁用输出消息.
-v - 详细模式. 向屏幕上记录所有消息。
foremost命令参数英文英文说明:
$ foremost [-v|-V|-h|-T|-Q|-q|-a|-w-d] [-t <type>] [-s <blocks>] [-k <size>]
[-b <size>] [-c <file>] [-o <dir>] [-i <file]
-V - display copyright information and exit
-t - specify file type. (-t jpeg,pdf ...)
-d - turn on indirect block detection (for UNIX file-systems)
-i - specify input file (default is stdin)
-a - Write all headers, perform no error detection (corrupted files)
-w - Only write the audit file, do not write any detected files to the disk
-o - set output directory (defaults to output)
-c - set configuration file to use (defaults to foremost.conf)
-q - enables quick mode. Search are performed on 512 byte boundaries.
-Q - enables quiet mode. Suppress output messages.
-v - verbose mode. Logs all messages to screen
foremost命令参数英文中文说明:
$ foremost [-v|-V|-h|-T|-Q|-q|-a|-w-d] [-t <type>] [-s <blocks>] [-k <size>]
[-b <size>] [-c <file>] [-o <dir>] [-i <file]
-V - 显示版权信息并退出
-t - 指定文件类型. (-t jpeg,pdf ...)
-d -打开间接块检测 (针对UNIX文件系统)
-i - 指定输入文件 (默认为标准输入)
-a - 写入所有的文件头部, 不执行错误检测(损坏文件)
-w - 向磁盘写入审计文件,不写入任何检测到的文件
-o - 设置输出目录 (默认为为输出)
-c - 设置配置文件 (默认为 foremost.conf)
-q - 启用快速模式. 在512字节边界执行搜索.
-Q - 启用安静模式. 禁用输出消息.
-v - 详细模式. 向屏幕上记录所有消息。
相关文章推荐
- xxd命令中文参数说明
- grep命令参数中文说明
- Mongodb启动命令参数中文说明
- Mongodb 启动命令mongod参数说明(中文翻译)
- Mongodb 启动命令mongod参数说明(中文翻译)
- tar命令参数说明
- Mongodb启动命令mongod参数说明
- Oracle9i初始化参数中文说明6
- mongoDB基础知识3----启动命令mongod参数说明
- linux cut命令参数说明,以及实例
- Mongodb启动命令mongod参数说明
- JQuery UI - draggable参数中文详细说明
- wget命令详情参数说明
- Oracle归档模式的命令及参数说明
- ab网站压力测试命令的参数、输出结果的中文注解
- Mongodb启动命令mongod参数说明
- 设定网路介面命令--ifconfig(包含txqueuelen参数说明)
- Java命令参数说明大全
- linux下的top命令参数说明 (virt,res,shr,data 的意义)