Cisco 7609 ROMMON升级过程指南
2018-02-09 23:13
411 查看
1、升级前的验证与备份命令
!
show redundancy
show rom-monitor slot 5 sp
show rom-monitor slot 5 rp
show rom-monitor slot 6 sp
show rom-monitor slot 6 rp
show tac
!
2、第一步开始备引擎的Rommon升级
备注:备引擎在第6插槽,先升级备引擎的SP镜像,再升级备引擎的RP镜像。
SP升级命令
upgrade rom-monitor slot 6 sp file tftp://10.126.76.239/rsp720_sp-rm2.srec.122-33r.SRD5
验证命令
show rom-monitor slot 6 SP
RP升级命令
upgrade rom-monitor slot 6 rp file tftp://10.126.76.239/rsp720_rp-rm2.srec.122-33r.SRD5
验证命令
show rom-monitor slot 6 rp
3、重新加载第6插槽的备引擎
备注:在完全升级完Rommon后重新加载,而不是切换。
重新加载命令
hw-module module 6 reset
冗余引擎验证命令
show redundancy
show rom-monitor slot 6 sp
show rom-monitor slot 6 rp
4、第二步开始主引擎的Rommon升级
备注:升级前验证第5插槽的主引擎
show redundancy
show rom-monitor slot 5 sp
show rom-monitor slot 5 rp
5、升级第5插槽的主引擎
备注:首先我们需要切换第5插槽的主引擎,等备引擎变为主引擎,再升级第5插槽的原主引擎现在为备引擎。
冗余引擎切换命令:
redundancy force-switchover
6、升级第5插槽的Rommon.
SP升级命令
upgrade rom-monitor slot 5 sp file tftp://10.126.76.239/rsp720_sp-rm2.srec.122-33r.SRD5
验证命令
show rom-monitor slot 5 sp
RP升级命令
upgrade rom-monitor slot 5 rp file tftp://10.126.76.239/rsp720_rp-rm2.srec.122-33r.SRD5
验证命令
show rom-monitor slot 5 rp
7、重新加载在第5槽的备引擎
备注:在完全升级完Rommon后重新加载,而不是切换。
重新加载命令
hw-module module 5 reset
8、在第5槽的备引擎起来后验证Rommon升级是否成功?
验证命令
show rom-monitor slot 5 sp
show rom-monitor slot 5 rp
show rom-monitor slot 6 sp
show rom-monitor slot 6 rp
Note: Once standby supervisor come up we will switchover module 6 active to standby in order to keep active module 5 and standby module 6 but this is not necessary just for consistency.
9、回滚步骤
a) Connect to the supervisor using console connection.
b) Check if we have some response from console.
c) If yes most likely supervisor is in ROMMON mode .
d) We should try to boot IOS from ROMMON (using “boot [path to IOS]” command).
e) If there will be no response from console try to reboot it one more time by powering it off and on.
f) If after power cycle there will be no response from console it would mean that supervisor has failed and has to be replaced.
!
show redundancy
show rom-monitor slot 5 sp
show rom-monitor slot 5 rp
show rom-monitor slot 6 sp
show rom-monitor slot 6 rp
show tac
!
2、第一步开始备引擎的Rommon升级
备注:备引擎在第6插槽,先升级备引擎的SP镜像,再升级备引擎的RP镜像。
SP升级命令
upgrade rom-monitor slot 6 sp file tftp://10.126.76.239/rsp720_sp-rm2.srec.122-33r.SRD5
验证命令
show rom-monitor slot 6 SP
RP升级命令
upgrade rom-monitor slot 6 rp file tftp://10.126.76.239/rsp720_rp-rm2.srec.122-33r.SRD5
验证命令
show rom-monitor slot 6 rp
3、重新加载第6插槽的备引擎
备注:在完全升级完Rommon后重新加载,而不是切换。
重新加载命令
hw-module module 6 reset
冗余引擎验证命令
show redundancy
show rom-monitor slot 6 sp
show rom-monitor slot 6 rp
4、第二步开始主引擎的Rommon升级
备注:升级前验证第5插槽的主引擎
show redundancy
show rom-monitor slot 5 sp
show rom-monitor slot 5 rp
5、升级第5插槽的主引擎
备注:首先我们需要切换第5插槽的主引擎,等备引擎变为主引擎,再升级第5插槽的原主引擎现在为备引擎。
冗余引擎切换命令:
redundancy force-switchover
6、升级第5插槽的Rommon.
SP升级命令
upgrade rom-monitor slot 5 sp file tftp://10.126.76.239/rsp720_sp-rm2.srec.122-33r.SRD5
验证命令
show rom-monitor slot 5 sp
RP升级命令
upgrade rom-monitor slot 5 rp file tftp://10.126.76.239/rsp720_rp-rm2.srec.122-33r.SRD5
验证命令
show rom-monitor slot 5 rp
7、重新加载在第5槽的备引擎
备注:在完全升级完Rommon后重新加载,而不是切换。
重新加载命令
hw-module module 5 reset
8、在第5槽的备引擎起来后验证Rommon升级是否成功?
验证命令
show rom-monitor slot 5 sp
show rom-monitor slot 5 rp
show rom-monitor slot 6 sp
show rom-monitor slot 6 rp
Note: Once standby supervisor come up we will switchover module 6 active to standby in order to keep active module 5 and standby module 6 but this is not necessary just for consistency.
9、回滚步骤
a) Connect to the supervisor using console connection.
b) Check if we have some response from console.
c) If yes most likely supervisor is in ROMMON mode .
d) We should try to boot IOS from ROMMON (using “boot [path to IOS]” command).
e) If there will be no response from console try to reboot it one more time by powering it off and on.
f) If after power cycle there will be no response from console it would mean that supervisor has failed and has to be replaced.
相关文章推荐
- Cisco 3550-SMI IOS升级过程分享 推荐
- Cisco 2600 Rommon模式下升级ISO【TFTP】
- cisco路由器ios升级(rommon下)
- Cisco 7609路由器开机进入rommon模式
- ubuntu内核升级过程
- 服务器从jdk1.6.0升级到1.6.0_12的过程记录
- MySQL存储过程编程教程读书笔记-第二章MySQL存储过程编程指南-存储过程部分
- Swift2.1 语法指南——构造过程
- cisco升级IOS的方法
- spring 4 升级踩雷指南
- 升级指南:将 SharePoint Portal Server 2003 升级到 Office SharePoint Server 2007
- 深入了解Oracle数据字典升级脚本catupgrd.sql调用过程
- Android系统Recovery工作原理之使用update.zip升级过程分析(三)---Android系统的三种启动模式
- RHEL5.2内核升级过程
- Android系统Recovery工作原理之使用update.zip升级过程分析(二)---update.zip差分包问题的解决
- Android系统Recovery工作原理之使用update.zip升级过程分析(九)---updater-script脚本语法简介以及执行流程
- Spark 1.6升级2.x防踩坑指南
- PHP升级到4.3版本之后改变了调用存储过程的一个特性
- Lenovo G480笔记本安装OS X Mavericks 10.9,升级10.9.1,驱动安装,DSDT修改全过程
- 升级PHP到5.3.3的过程及注意事项