openwrt x86 编译部署
2017-12-28 08:58
1376 查看
0.背景
前段时间看到C1037u多网口版本,很是喜欢,替换的4530r,发现玩openwrt x86的人比较少,写一篇日记,以备后用,有错误之处请指出。1.配置编译环境
Linux2.获取源代码
1 2 3 4 5 6 | svn co svn://svn.openwrt.org/openwrt/trunk/ #svn co svn://svn.openwrt.org/openwrt/branches/barrier_breaker -r42625 svn update #cp feeds.conf.default feeds.conf ./scripts/feeds update -a ./scripts/feeds install -a |
3.一些问题
3.1.config文件位置
openwrt config文件:.configkernel config: build_dir/target-xxxxxxx/linux-x86_generic/linux-x.xx.xx/.config
3.2.内核版本更改
支持内核版本列表: include/kernel-version.mk更改内核版本位置: target/linux/XXX/Makefile.
4.make menuconfig
这里给出一个基本配置,不过其中Busybox配置,正常使用默认配置即可,不需要Customize busybox options,我为了在日后的initramfs中加入一些
overlayfs的功能自己加进去了配置,另外的配置基本是x86必须的。
1 2 3 4 5 67 | Target System (x86) #目标平台选择 Target Images ---> [*] ext4 #生成.EXT4.IMG文件 Base system ---> <*> block-mount <*> busybox ---> #用于今后initramfs支持,可以将所有lib编译到busybox [*] Customize busybox options Busybox Settings ---> General Configuration ---> [*] Support --install [-s] to install applet links at runtime [*] Don't use /usr Linux Module Utilities ---> [*] modinfo [*] Simplified modutils [*] Accept module options on modprobe command line [*] Skip loading of already loaded modules (/lib/modules) Default directory containing modules Linux System Utilities ---> [*] mdev [*] Support /etc/mdev.conf [*] Support subdirs/symlinks [*] Support regular expressions substitutions when renaming [*] Support command execution at device addition/removal [*] Support loading of firmwares [*] findfs [*] blkid [*] Print filesystem type [*] losetup [*] lspci [*] lsusb [*] mount [*] Support specifying devices by label or UUID Filesystem/Volume identification ---> [*] Ext filesystem [*] fat filesystem Networking Utilities ---> [*] ftpd [*] Enable upload commands [*] Enable workaround for RFC-violating clients [*] inetd [*] telnetd [*] Support standalone telnetd (not inetd only) [*] tcpsvd [*] udpsvd kernel modules ---> Block Devices ---> <*> kmod-ata-core <*> kmod-ata-ahci <*> kmod-loop -*- kmod-scsi-core <*> kmod-scsi-generic Filesystems ---> <*> kmod-fs-ext4 <*> kmod-fs-ntfs <*> kmod-fs-vfat Input modules --->#键盘 -*- kmod-hid <*> kmod-hid-generic -*- kmod-input-core -*- kmod-input-evdev Native Language Support ---> <*> kmod-nls-cp437 #vfat需要这个 <*> kmod-nls-iso8859-1 <*> kmod-nls-utf8 Network Devices ---> #网卡驱动 <*> kmod-macvlan USB Support ---> -*- kmod-usb-core <*> kmod-usb-hid #usb键盘 <*> kmod-usb-ohci <*> kmod-usb-storage <*> kmod-usb2 <*> kmod-usb3 Wireless Drivers --->#wifi卡驱动 Network ---> <*> hostapd #wifi ap模式 <*> hostapd-common <*> hostapd-utils <*> wpa-supplicant Utilities --->#自选 fdisk等 |
4.make kernel
_menuconfig
目的是为了加入x86的多核心以及大内存支持1 2 3 4 5 67 | Processor type and features ---> [*] Symmetric multi-processing support Processor family (Core 2/newer Xeon) --->#自行选择处理器平台 [*] Supported processor vendors --->#自行选择处理器平台 (2) Maximum number of CPUs #自行编辑 [*] SMT (Hyperthreading) scheduler support#超线程支持 [*] Multi-core scheduler support High Memory Support (4GB) ---> |
5.make
编译1 2 3 4 5 67 | make -j 100 download #下载包,openwrt是基于源码+patch形式,下载过程比较慢,最好在墙外 make clean make -j 5 V=99 #编译某个包 make packages/xxx/clean make packages/xxx/compile make packages/xxx/install |
6.安装
6.1.固件简介
ls bin/x86会看到有以下一些文件,与官方编译的固件名称完全相同,这里大概解释下:
openwrt-x86-generic-combined-ext4.img.gz
: 包含vmlinuz、rootfs(ext4)、引导信息以及相关分区信息的img,一般是两个分区,可以把它看成是硬盘镜像,直接dd到某个磁盘
openwrt-x86-generic-rootfs-ext4.img.gz
: rootfs分区镜像,可以直接dd到某个分区,或者mount -o到某个目录
openwrt-x86-generic-rootfs-squashfs.img
: 同上
openwrt-x86-generic-vmlinuz
: kernel
openwrt-x86-generic-Generic-rootfs.tar.gz
: rootfs用gz打包后的文件可以看出,要让系统启动,需要引导器(x86是使用grub,好比是路由中的uboot,当然uboot管的内容更多)、
kernel、
rootfs三者。
6.2.简易部署
如果你的磁盘(U盘)只用于openwrt系统,可以使用最简单的用combined.img直接dd到目标盘,这样的好处是简单,坏处是如果你的sdb(磁盘/U盘)很大,就带来空间浪费,虽然可以在rootfs中存数据,但是下次升级系统就带来不必要的麻烦,命令行如下:
1 2 | gunzip bin/x86/openwrt-x86-generic-combined-ext4.img.gz dd if=bin/x86/openwrt-x86-generic-combined-ext4.img of=/dev/sdb #根据自己情况选择磁盘 |
6.3.自定义部署
适合有一定基础的兄弟,大致步骤:如果主板是bios,我习惯用grub4dos,参见无忧启动;
如果主板是efi,我习惯用grub2,需要efi文件系统(fat文件系统),在分区的时候要记得加入,参照个大linux发行版。
0.建立分区、文件系统;
1.用dd将
rootfs.ext4.img写入到分区;
2.复制
vmlinuz到分区;
3.安装引导
4.编辑menu.lst;
6.启动
7.initramfs && overlayfs
7.1.overlayfs
由于openwrt x86一般都是安装在U盘/TF卡/硬盘等介质上,默认是ext文件系统,就没有使用overlayfs,如果要使用
overlayfs就得用squashfs。由于从路由过度过来,我个人对
overlayfs颇有好感,着手在x86的ext4上加入
overlayfs支持。稍后,会单独写一篇关于x86下
overlayfs的文档。
7.2.initramfs
按照如下编译选项配置,其编译生成的vmlinuz是一个带
initramfs的
kernel,当然可以在也可以在Use external cpio中选择自定义
initramfs目录,如果没选择Use external cpio,openwrt则会将整个rootfs当作initramfs编译进
vmlinuz.
Target Images ---> [*] ramdisk #其实就是initramfs () Use external cpio#选择外部cpio,作为initramfs如果用gurb加载它,则整个系统会在ramfs上运行,所有配置在重启后都将不被保留,一般需要在这个上面启动到另一个
kernel(kexec)或者switch_root 到另一个rootfs(真实的磁盘)环境,ramdisk(
initramfs)。因此一般是不勾选编译选项中的ramdisk选项,自己着手来做
initramfs,加入一些hook(比如加入
overlayfs支持、switch_root到其他
rootfs、干脆直接kexec到其他
kernel),用gurb的initrd加载,就可以完成系统启动。
著作权归作者所有。商业转载请联系作者获得授权,非商业转载请注明出处。
本文链接:http://blog.ick.im/posts/2014-10-31-openwrt-x86-compile.html
相关文章推荐
- openwrt x86 编译部署
- openwrt编译x86固件 VMware安装镜像
- openwrt编译x86镜像
- .NET编译、WOW64注册表访问、同时在X86和X64平台上部署应用程序
- .NET编译、WOW64注册表访问、同时在X86和X64平台上部署应用程序
- [x86_generic] Openwrt编译x86,for VMware虚拟机
- X86 openWRT 虚拟机编译教程 在ubuntu10中X86 OpenWRT的源码编译
- MDT2010学习(九),部署Win7 x86 企业版
- php 5.3.10 + nginx1.0.12 + PostgreSQL 9.1.2 源码编译自动化部署第一版
- 基于tiny210v2编译openwrt
- ubuntu 编译独立与openwrt的uci
- spring mvc 编译的jar包,部署为windows 服务
- Openwrt编译生成虚拟机镜像
- Windows Phone 8初学者开发—第8部分:理解编译和部署
- Cocos2d-html5 通过apache ant编译成web应用以便部署到服务器
- Openwrt交叉编译nginx-1.8.0
- openwrt 之 wifi选择编译
- openwrt x86下配置pppoe-server注意事项
- JavaBean的编译和部署说明
- 盈鹏飞嵌入式---OpenWRT在iMX6UL上面的移植与编译