iOS librtmp打包脚本
2017-12-21 00:00
597 查看
请注意SDKVERSION == 请查看你xocde模拟器的版本
1:/Applications/Xcode.app/Contents/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/
2:请保证名字的正确 第一个为build_ssl.sh 第二个为build_rtmp.sh
1:/Applications/Xcode.app/Contents/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/
2:请保证名字的正确 第一个为build_ssl.sh 第二个为build_rtmp.sh
#!/bin/sh # Automatic build script for libssl and libcrypto # for iPhoneOS and iPhoneSimulator # # Created by Felix Schulze on 16.12.10. # Copyright 2010 Felix Schulze. All rights reserved. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. # ########################################################################### # Change values here # # VERSION="1_0_2" # SDKVERSION="11.1" # # # ########################################################################### # # # Don't change anything under this line! # # # ########################################################################### CURRENTPATH=`pwd` ARCHS="i386 x86_64 armv7 armv7s arm64" DEVELOPER=`xcode-select -print-path` if [ ! -d "$DEVELOPER" ]; then echo "xcode path is not set correctly $DEVELOPER does not exist (most likely because of xcode > 4.3)" echo "run" echo "sudo xcode-select -switch <xcode path>" echo "for default installation:" echo "sudo xcode-select -switch /Applications/Xcode.app/Contents/Developer" exit 1 fi case $DEVELOPER in *\ * ) echo "Your Xcode path contains whitespaces, which is not supported." exit 1 ;; esac case $CURRENTPATH in *\ * ) echo "Your path contains whitespaces, which is not supported by 'make install'." exit 1 ;; esac set -e if [ ! -e openssl-${VERSION}.zip ]; then echo "Downloading openssl-${VERSION}.zip" curl https://codeload.github.com/openssl/openssl/zip/OpenSSL_${VERSION} -o OpenSSL_${VERSION}.zip else echo "Using openssl-${VERSION}.zip" # Remove the source directory if already exist rm -rf "${SRCPATH}/openssl-${VERSION}" fi mkdir -p "${CURRENTPATH}/src" mkdir -p "${CURRENTPATH}/build" mkdir -p "${CURRENTPATH}/lib" # tar zxf openssl-${VERSION}.tar.gz -C "${CURRENTPATH}/src" unzip OpenSSL_${VERSION}.zip -d "${CURRENTPATH}/src" cd ${CURRENTPATH}/src/openssl*${VERSION} for ARCH in ${ARCHS} do if [[ "${ARCH}" == "i386" || "${ARCH}" == "x86_64" ]]; then PLATFORM="iPhoneSimulator" else sed -ie "s!static volatile sig_atomic_t intr_signal;!static volatile intr_signal;!" "crypto/ui/ui_openssl.c" PLATFORM="iPhoneOS" fi export CROSS_TOP="${DEVELOPER}/Platforms/${PLATFORM}.platform/Developer" export CROSS_SDK="${PLATFORM}${SDKVERSION}.sdk" export BUILD_TOOLS="${DEVELOPER}" echo "Building openssl-${VERSION} for ${PLATFORM} ${SDKVERSION} ${ARCH}" echo "Please stand by..." export CC="${BUILD_TOOLS}/usr/bin/gcc -arch ${ARCH}" mkdir -p "${CURRENTPATH}/bin/${PLATFORM}${SDKVERSION}-${ARCH}.sdk" LOG="${CURRENTPATH}/bin/${PLATFORM}${SDKVERSION}-${ARCH}.sdk/build-openssl-${VERSION}.log" set +e if [[ "$VERSION" =~ 1_0_0 ]]; then ./Configure BSD-generic32 --openssldir="${CURRENTPATH}/bin/${PLATFORM}${SDKVERSION}-${ARCH}.sdk" > "${LOG}" 2>&1 elif [ "${ARCH}" == "x86_64" ]; then ./Configure darwin64-x86_64-cc --openssldir="${CURRENTPATH}/bin/${PLATFORM}${SDKVERSION}-${ARCH}.sdk" > "${LOG}" 2>&1 else ./Configure iphoneos-cross --openssldir="${CURRENTPATH}/bin/${PLATFORM}${SDKVERSION}-${ARCH}.sdk" > "${LOG}" 2>&1 fi if [ $? != 0 ]; then echo "Problem while configure - Please check ${LOG}" exit 1 fi # add -isysroot to CC= sed -ie "s!^CFLAG=!CFLAG=-isysroot ${CROSS_TOP}/SDKs/${CROSS_SDK} -miphoneos-version-min=7.0 !" "Makefile" if [ "$1" == "verbose" ]; then make else make >> "${LOG}" 2>&1 fi if [ $? != 0 ]; then echo "Problem while make - Please check ${LOG}" exit 1 fi set -e make install >> "${LOG}" 2>&1 make clean >> "${LOG}" 2>&1 done echo "Build library..." lipo -create ${CURRENTPATH}/bin/iPhoneSimulator${SDKVERSION}-i386.sdk/lib/libssl.a ${CURRENTPATH}/bin/iPhoneSimulator${SDKVERSION}-x86_64.sdk/lib/libssl.a ${CURRENTPATH}/bin/iPhoneOS${SDKVERSION}-armv7.sdk/lib/libssl.a ${CURRENTPATH}/bin/iPhoneOS${SDKVERSION}-armv7s.sdk/lib/libssl.a ${CURRENTPATH}/bin/iPhoneOS${SDKVERSION}-arm64.sdk/lib/libssl.a -output ${CURRENTPATH}/lib/libssl.a lipo -create ${CURRENTPATH}/bin/iPhoneSimulator${SDKVERSION}-i386.sdk/lib/libcrypto.a ${CURRENTPATH}/bin/iPhoneSimulator${SDKVERSION}-x86_64.sdk/lib/libcrypto.a ${CURRENTPATH}/bin/iPhoneOS${SDKVERSION}-armv7.sdk/lib/libcrypto.a ${CURRENTPATH}/bin/iPhoneOS${SDKVERSION}-armv7s.sdk/lib/libcrypto.a ${CURRENTPATH}/bin/iPhoneOS${SDKVERSION}-arm64.sdk/lib/libcrypto.a -output ${CURRENTPATH}/lib/libcrypto.a mkdir -p ${CURRENTPATH}/include cp -R ${CURRENTPATH}/bin/iPhoneSimulator${SDKVERSION}-i386.sdk/include/openssl ${CURRENTPATH}/include/ echo "Building done." echo "Cleaning up..." rm -rf ${CURRENTPATH}/src/openssl*${VERSION} rm -r ${CURRENTPATH}/src echo "Done."
#!/bin/sh # build-librtmp.sh # Automated librtmp build script for iPhoneOS and iPhoneSimulator # # Created by Min Kim on 10/1/13. # Copyright (c) 2013 iFactory Lab Limited. All rights reserved. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. # ########################################################################### # Change values here # # # SDKVERSION="11.1" # # # ########################################################################### # # # Don't change anything under this line! # # # ########################################################################### CURRENTPATH=`pwd` ARCHS="i386 x86_64 armv7 armv7s arm64" LIBRTMPREPO="git://git.ffmpeg.org/rtmpdump" BUILDPATH="${CURRENTPATH}/build" LIBPATH="${CURRENTPATH}/lib" INCLUDEPATH="${CURRENTPATH}/include" SRCPATH="${CURRENTPATH}/src" LIBRTMP="librtmp.a" DEVELOPER=`xcode-select -print-path` if [ ! -d "$DEVELOPER" ]; then echo "xcode path is not set correctly $DEVELOPER does not exist (most likely because of xcode > 4.3)" echo "run" echo "sudo xcode-select -switch <xcode path>" echo "for default installation:" echo "sudo xcode-select -switch /Applications/Xcode.app/Contents/Developer" exit 1 fi # Check whether openssl has already installed on the machine or not. # libcrypt.a / libssl.a set -e echo 'Check openssl installation' if [ -f "${LIBPATH}/libcrypto.a" ] && [ -f "${LIBPATH}/libssl.a" ] && [ -d "${INCLUDEPATH}/openssl" ]; then echo 'Openssl for iOS has already installed, no need to install openssl' else echo 'Openssl for iOS not found, will install openssl for iOS' ./build-libssl.sh echo 'Succeeded to install openssl' fi # Download librtmp source code from git repository # We assuem the user already installed git client. echo 'Clone librtmp git repository' # Remove the directory if already exist rm -rf "${SRCPATH}/rtmpdump" git clone ${LIBRTMPREPO} src/rtmpdump cd "${SRCPATH}/rtmpdump/librtmp" LIBRTMP_REPO="" for ARCH in ${ARCHS} do if [ "${ARCH}" == "i386" ] || [ "${ARCH}" == "x86_64" ]; then PLATFORM="iPhoneSimulator" else PLATFORM="iPhoneOS" fi export CROSS_TOP="${DEVELOPER}/Platforms/${PLATFORM}.platform/Developer" export CROSS_SDK="${PLATFORM}${SDKVERSION}.sdk" export BUILD_TOOLS="${DEVELOPER}" echo "Building librtmp for ${PLATFORM} ${SDKVERSION} ${ARCH}" echo "Please wait..." # add arch to CC= sed -ie "s!AR=\$(CROSS_COMPILE)ar!AR=/usr/bin/ar!" "Makefile" sed -ie "/CC=\$(CROSS_COMPILE)gcc/d" "Makefile" echo "CC=\$(CROSS_COMPILE)gcc -arch ${ARCH}" >> "Makefile" export CROSS_COMPILE="${DEVELOPER}/usr/bin/" export XCFLAGS="-isysroot ${CROSS_TOP}/SDKs/${CROSS_SDK} -miphoneos-version-min=7.0 -I${INCLUDEPATH} -arch ${ARCH}" if [ "${ARCH}" == "i386" ] || [ "${ARCH}" == "x86_64" ]; then export XLDFLAGS="-isysroot ${CROSS_TOP}/SDKs/${CROSS_SDK} -miphoneos-version-min=7.0 -L${LIBPATH} -arch ${ARCH}" else export XLDFLAGS="-isysroot ${CROSS_TOP}/SDKs/${CROSS_SDK} -miphoneos-version-min=7.0 -L${LIBPATH} -arch ${ARCH}" fi OUTPATH="${BUILDPATH}/librtmp-${PLATFORM}${SDKVERSION}-${ARCH}.sdk" mkdir -p "${OUTPATH}" LOG="${OUTPATH}/build-librtmp.log" make SYS=darwin >> "${LOG}" 2>&1 make SYS=darwin prefix="${OUTPATH}" install >> "${LOG}" 2>&1 make clean >> "${LOG}" 2>&1 LIBRTMP_REPO+="${OUTPATH}/lib/${LIBRTMP} " done echo "Build universal library..." lipo -create ${LIBRTMP_REPO}-output ${LIBPATH}/${LIBRTMP} mkdir -p ${INCLUDEPATH} cp -R ${BUILDPATH}/librtmp-iPhoneSimulator${SDKVERSION}-i386.sdk/include/ ${INCLUDEPATH}/ echo "Building done." echo "Cleaning up..." rm -rf ${SRCPATH}/rtmpdump echo "Done."
相关文章推荐
- iOS自动打包并发布脚本
- iOS脚本打包和持续集成
- iOS一行shell脚本自动打包上传指定位置
- iOS 脚本打包
- iOS 多渠道打包 编译脚本
- python生成ios固定代码模块脚本打包成exe文件
- iOS自动打包并发布脚本
- IOS工程自动打包并发布脚本实现
- IOS工程自动打包并发布脚本实现
- IOS工程自动打包并发布脚本实现
- iOS-Jenkins脚本打包上传fir
- 【ios开发技术】IOS项目工程自动打包并发布(用脚本实现打包)
- IOS工程自动打包并发布脚本实现
- IOS工程自动打包并发布脚本实现
- iOS利用(Shell脚本)自动打包项目工程生成ipa
- iOS自动打包并发布脚本
- iOS工程自动打包并发布通过脚本实现
- 【iOS】Xcode9 自动化脚本打包
- libcurl for ios 编译脚本
- [iOS 自动打包]shell脚本使用-ipa_build 脚本使用