Linux 学习--GNU nano编辑器的使用
2017-12-15 10:06
387 查看
转载:http://blog.csdn.net/doupeihua/article/details/22041555
Linux GNU nano编辑器的使用
被nano编辑器折腾了半天,收藏一下吧。省得以后到处找
我们以后基本都需要编辑文件来实现不同的设置,那么我们用什么来设置配置文件呢,用编辑器,就好比windows下的记事本和写字板,我们今天就来讲一下debian的默认编辑器—-nano
首先我们在网络上看看有没nano的资料
网络上很少有nano的资料,那么我就来 给大家讲解一下nano的使用吧
就以编辑网络配置文件为例子吧
GNU nano 1.2.4,nano的版本 File: /etc/network/interfaces打开的文件的绝对地址
下面就是打开的文件的内容
iface lo inet loopback
iface eth0 inet static
address 192.168.254.20
netmask 255.255.255.0
network 192.168.254.0
broadcast 192.168.254.255
gateway 192.168.254.254
[ Read 17 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Page ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where Is ^V Next Page ^U UnCut Txt ^T To Spell
这些是帮助栏目,呵呵^G表示ctrl+g一起按,呵呵
^G Get Help表示同时按ctrl和G,就是调出帮助菜单
我们来试一下
我按 了一下就调出了帮助菜单了,我下面就直接把快捷键表给大家,大家试试吧
一直以来vi都被人们说是最强大的编辑器,但gentoo和debian选择nano做了默认的编辑器
freebsd选择ee做了默认的编辑器,我相信在专业人士眼睛里面freebsd和redaht比较起来,
redhat基本没什么可以炫耀的,为什么他们不选择vi呢,因为vi操作比较复杂
而所谓的简单编辑器nano就简单,非常容易上手,说是简单编辑器
其实一点都不简单,只不过是nano谦虚一下罢了
这里声明一下^表示键盘上的ctrl键,上个只要是做过编程的朋友应该都清楚,^G表示同时按下ctrl和g
(F1)表示按(F1)也是一样的 ,M-表示使用alt+后面的键
^G ==F1) Invoke the help menu
调用帮助菜单
^X ==(F2) Close currently loaded file/Exit from nano
退出
^O ==(F3) Write the current file to disk == ^O WriteOut
保存
然后回车就保存了
^J ==(F4) Justify the current paragraph
调整当前段落(配置文件的不要用这东西,格式一下就出问题了哦)
^R ==(F5) Insert another file into the current one
插入其他的文件到当前的文件,而且查找文件的时候支持tab
^W ==(F6) Search for text within the editor
查找
^Y ==(F7) Move to the previous screen
上一屏幕
^V ==(F8) Move to the next screen
下一屏幕
^K ==(F9) Cut the current line and store it in the cutbuffer
裁减当前一排并保存在缓冲区
^U ==(F10) Uncut from the cutbuffer into the current line
将缓冲区的东西粘贴到此
^C ==(F11) Show the position of the cursor
显示光标位置
^T ==(F12) Invoke the spell checker, if available
调用拼写检查程序
^P Move up one line
向上移动一行
^N Move down one line
向下移动一
^F Move forward one character
向前移动光标一格
^B Move back one character
向后移动光标一格
^A Move to the beginning of the current line
移动到当前行的开头
^E Move to the end of the current line
移动到当前行的末尾
^L Refresh (redraw) the current screen
刷新当前屏幕
^^ (M-A) Mark text at the current cursor location
标记文本
^D Delete the character under the cursor
删除光标后一个字母
^H Delete the character to the left of the cursor
向左边删一个字母
^I Insert a tab character
插入一个tab值
^ (F14) (M-R) Replace text within the editor
查找并且替换
^M Insert a carriage return at the cursor position
插入一个回车
^_ (F13) (M-G) Go to a specific line number
跳转到某行
^Space Move forward one word
前进一个单词
M-Space Move backward one word
后退一个单词
M-] Find other bracket
搜索下一个括号
M-< Open previously loaded file
打开先前加载的文件
M-> Open next loaded file
打开下一个加载的文件
M-C Constant cursor position enable/disable
M-I Auto indent enable/disable
是否首行缩进
M-Z Suspend enable/disable
是否悬挂
M-X Help mode enable/disable
帮助模式
M-M Mouse support enable/disable
鼠标支持
M-Y Color syntax highlighting enable/disable
语法加亮
这个就是退出了哦
好了nano 的编辑器就说这样多了
然后我们来说一下基本的几个配置文件以及地方
首先是打开命令行高效输入的位置
看到了高级的命令行补全,连软件包的名字都不需要记了哦,呵呵,是不是很爽哦
怎么ls没颜色了,你们是不是在redhat里面看到过颜色啊,那我们来改
看到了没,兰色是目录,白色是文件,绿色是可以运行的文件
cnrot:/# ll
-bash: ll: command not found
告诉我们ll没这个命令
那我们来做一个自己定义的命令吧
记住要注销才生效,不需要重新启动的哦
看到了没
看到了没,这是自己定义命令哦
好了,我现在 给大家说几个文件的位置吧
怕大家找不到
首先是网络配置文件/etc/network/interfaces
GNU nano 1.2.4 File: /etc/network/interfaces Modified
iface lo inet loopback
iface eth0 inet static
address 192.168.254.20
netmask 255.255.255.0
network 192.168.254.0
broadcast 192.168.254.255
gateway 192.168.254.254
安装源配置文件
GNU nano 1.2.4 File: /etc/apt/sources.list
deb http://debian.cn99.com/debian/ stable main
deb-src http://debian.cn99.com/debian/ stable main
deb http://security.debian.org/ stable/updates main contrib
Linux GNU nano编辑器的使用
被nano编辑器折腾了半天,收藏一下吧。省得以后到处找
我们以后基本都需要编辑文件来实现不同的设置,那么我们用什么来设置配置文件呢,用编辑器,就好比windows下的记事本和写字板,我们今天就来讲一下debian的默认编辑器—-nano
首先我们在网络上看看有没nano的资料
网络上很少有nano的资料,那么我就来 给大家讲解一下nano的使用吧
就以编辑网络配置文件为例子吧
GNU nano 1.2.4,nano的版本 File: /etc/network/interfaces打开的文件的绝对地址
下面就是打开的文件的内容
This file describes the network interfaces available on your system
and how to activate them. For more information, see interfaces(5).
The loopback network interface
auto loiface lo inet loopback
The primary network interface
auto eth0iface eth0 inet static
address 192.168.254.20
netmask 255.255.255.0
network 192.168.254.0
broadcast 192.168.254.255
gateway 192.168.254.254
dns-* options are implemented by the resolvconf package, if installed
dns-nameservers 202.103.0.117 202.103.24.68[ Read 17 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Page ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where Is ^V Next Page ^U UnCut Txt ^T To Spell
这些是帮助栏目,呵呵^G表示ctrl+g一起按,呵呵
^G Get Help表示同时按ctrl和G,就是调出帮助菜单
我们来试一下
我按 了一下就调出了帮助菜单了,我下面就直接把快捷键表给大家,大家试试吧
一直以来vi都被人们说是最强大的编辑器,但gentoo和debian选择nano做了默认的编辑器
freebsd选择ee做了默认的编辑器,我相信在专业人士眼睛里面freebsd和redaht比较起来,
redhat基本没什么可以炫耀的,为什么他们不选择vi呢,因为vi操作比较复杂
而所谓的简单编辑器nano就简单,非常容易上手,说是简单编辑器
其实一点都不简单,只不过是nano谦虚一下罢了
这里声明一下^表示键盘上的ctrl键,上个只要是做过编程的朋友应该都清楚,^G表示同时按下ctrl和g
(F1)表示按(F1)也是一样的 ,M-表示使用alt+后面的键
^G ==F1) Invoke the help menu
调用帮助菜单
^X ==(F2) Close currently loaded file/Exit from nano
退出
^O ==(F3) Write the current file to disk == ^O WriteOut
保存
然后回车就保存了
^J ==(F4) Justify the current paragraph
调整当前段落(配置文件的不要用这东西,格式一下就出问题了哦)
^R ==(F5) Insert another file into the current one
插入其他的文件到当前的文件,而且查找文件的时候支持tab
^W ==(F6) Search for text within the editor
查找
^Y ==(F7) Move to the previous screen
上一屏幕
^V ==(F8) Move to the next screen
下一屏幕
^K ==(F9) Cut the current line and store it in the cutbuffer
裁减当前一排并保存在缓冲区
^U ==(F10) Uncut from the cutbuffer into the current line
将缓冲区的东西粘贴到此
^C ==(F11) Show the position of the cursor
显示光标位置
^T ==(F12) Invoke the spell checker, if available
调用拼写检查程序
^P Move up one line
向上移动一行
^N Move down one line
向下移动一
^F Move forward one character
向前移动光标一格
^B Move back one character
向后移动光标一格
^A Move to the beginning of the current line
移动到当前行的开头
^E Move to the end of the current line
移动到当前行的末尾
^L Refresh (redraw) the current screen
刷新当前屏幕
^^ (M-A) Mark text at the current cursor location
标记文本
^D Delete the character under the cursor
删除光标后一个字母
^H Delete the character to the left of the cursor
向左边删一个字母
^I Insert a tab character
插入一个tab值
^ (F14) (M-R) Replace text within the editor
查找并且替换
^M Insert a carriage return at the cursor position
插入一个回车
^_ (F13) (M-G) Go to a specific line number
跳转到某行
^Space Move forward one word
前进一个单词
M-Space Move backward one word
后退一个单词
M-] Find other bracket
搜索下一个括号
M-< Open previously loaded file
打开先前加载的文件
M-> Open next loaded file
打开下一个加载的文件
M-C Constant cursor position enable/disable
M-I Auto indent enable/disable
是否首行缩进
M-Z Suspend enable/disable
是否悬挂
M-X Help mode enable/disable
帮助模式
M-M Mouse support enable/disable
鼠标支持
M-Y Color syntax highlighting enable/disable
语法加亮
这个就是退出了哦
好了nano 的编辑器就说这样多了
然后我们来说一下基本的几个配置文件以及地方
首先是打开命令行高效输入的位置
看到了高级的命令行补全,连软件包的名字都不需要记了哦,呵呵,是不是很爽哦
怎么ls没颜色了,你们是不是在redhat里面看到过颜色啊,那我们来改
看到了没,兰色是目录,白色是文件,绿色是可以运行的文件
cnrot:/# ll
-bash: ll: command not found
告诉我们ll没这个命令
那我们来做一个自己定义的命令吧
记住要注销才生效,不需要重新启动的哦
看到了没
看到了没,这是自己定义命令哦
好了,我现在 给大家说几个文件的位置吧
怕大家找不到
首先是网络配置文件/etc/network/interfaces
GNU nano 1.2.4 File: /etc/network/interfaces Modified
This file describes the network interfaces available on your system
and how to activate them. For more information, see interfaces(5).
The loopback network interface
auto loiface lo inet loopback
The primary network interface
auto eth0iface eth0 inet static
address 192.168.254.20
netmask 255.255.255.0
network 192.168.254.0
broadcast 192.168.254.255
gateway 192.168.254.254
dns-* options are implemented by the resolvconf package, if installed
dns-nameservers 202.103.0.117 202.103.24.68安装源配置文件
GNU nano 1.2.4 File: /etc/apt/sources.list
deb file:///cdrom/ sarge main
deb cdrom:[Debian GNU/Linux 3.1 r0a Sarge - Official i386 Binary-1 (20050607)$deb http://debian.cn99.com/debian/ stable main
deb-src http://debian.cn99.com/debian/ stable main
deb http://security.debian.org/ stable/updates main contrib
相关文章推荐
- Linux GNU nano编辑器的使用
- linux学习(1)---安装了系统,man命令,info命令,nano命令(编辑器)
- Unix_Linux学习(1)——vim编辑器的使用学习
- Linux编辑器nano使用
- Linux学习—svn: 无法使用外部编辑器取得日志信息;请尝试设定 $SVN_EDITOR 环境变数
- Linux学习(二)Vim编辑器使用
- Linux学习笔记8——VIM编辑器的使用
- Unix_Linux学习(1)——vim编辑器的使用学习
- Linux入门学习,怎么使用Vim编辑器编辑保存文件?以及查看浏览文件的几种方式介绍——(四)
- 温故而知新--Linux学习笔记(三)Vim编辑器的使用
- linux_vim编辑器的使用学习,按李先静老师的系统程序员
- linux下GNU、G++编辑器的安装及基本使用
- 2016-3-29 linux基础学习——vim编辑器的使用
- 【Linux学习】Linux上vi(vim)编辑器使用教程
- Oracle学习(8)--Linux系统的VI编辑器常用命令、linux中使用ftp上传文件
- linux下GNU、G++编辑器的安装及基本使用
- linux学习整理之vim编辑器的使用
- linux上nano编辑器使用教程
- Linux GNU nano编辑器
- linux下nano编辑器使用教程(转)