Entering Device Firmware Upgrade (DFU) mode
2017-09-20 14:15
134 查看
Entering Device Firmware Upgrade(DFU) mode
Restoring a device after it enters DFU mode returns it to a known good state with the certainty that only unmodified Apple-signed code is present.
DFU mode can be entered manually:
First connect the device to a computer using a USB cable,
then hold down both the Home and Sleep/Wake buttons.
After 8 seconds, release the Sleep/Wake button while continuing to hold down the Home button.
Note:
Nothing will be displayed on the screen when the device is in DFU mode.
If the Apple logo appears, the Sleep/Wake button was held down too long.
Restoring a device after it enters DFU mode returns it to a known good state with the certainty that only unmodified Apple-signed code is present.
DFU mode can be entered manually:
First connect the device to a computer using a USB cable,
then hold down both the Home and Sleep/Wake buttons.
After 8 seconds, release the Sleep/Wake button while continuing to hold down the Home button.
Note:
Nothing will be displayed on the screen when the device is in DFU mode.
If the Apple logo appears, the Sleep/Wake button was held down too long.
相关文章推荐
- dfu-Device Firmware Upgrade
- STM32 DFU -- Device Firmware Upgrade
- no such device Entering rescue mode grub rescue
- error: no such device: xxx xxx Entering rescue mode... grub rescue >
- error: no such device: xxx xxx Entering rescue mode... grub rescue >
- error: no such device: xxx xxx Entering rescue mode... grub rescue >
- firmware upgrade encountered an issue.please select recovery mode in kies & try again
- error: no such device: xxx xxx Entering rescue mode... grub rescue >
- error: no such device: xxx xxx Entering rescue mode... grub rescue >
- error: no such device: xxx xxx Entering rescue mode... grub rescue >
- error: no such device: xxx xxx Entering rescue mode... grub rescue >
- error: no such device: xxx xxx Entering rescue mode... grub rescue >
- error: no such device: xxx xxx Entering rescue mode... grub rescue >
- error: no such device: xxx xxx Entering rescue mode... grub rescue >
- FTP连接时出现“227 Entering Passive Mode” 的解决方法
- unknwn filesystem entering rescue mode grup rescue解决办法
- FTP连接时出现“227 Entering Passive Mode” 的解决方法(附加实际案例)
- Brocade switch upgrade firmware
- FTP连接时出现“227 Entering Passive Mode” 的解决方法
- win7系统开机屏幕总是显示entering power save mode的解决方法