H3C S5720交换机系统文件丢失一直重启的解决办法

一、故障描述：
公司买了两台交换机H3C S5120，由于小兄弟没经验，把flash:给格式化了，交换机不停的在重启，无法进入系统。

二、解决思路：
1.下载tftp软件。

2.从另外一台交换机的flash中下载一份系统文件。

3.装系统文件上传致故障交换机的flash中，重启交换机，故障解决。

三.详细配置过程如下：

1.下载tftp软件。
链接：http://pan.baidu.com/s/1qYqfsle 密码：751q (1)把电脑本地网卡配置： IP地址：10.10.10.2 子网掩码： 255.255.255.0 (2)打开tftp软件： 下载的软件目录data中已存有交换机的系统文件（s5720li-v200r010c00spc600.c） 如果在遇到相同型号的设备，可省略第2步。直接上传到故障交换机即可。
2.从另外一台交换机的flash中下载一份系统文件(s5720li-v200r010c00spc600.cc)。
(1)查看另一台交换机flash: <HUAWEI>dir Directory of flash:/

Idx Attr Size(Byte) Date Time FileName
0 drw- - Aug 23 2016 03:00:52 dhcp
1 drw- - Aug 23 2016 03:00:24 user
2 drw- - Aug 23 2016 03:01:03 logfile
3 drw- - Aug 23 2016 03:00:12 $_install_mod
4 -rw- 836 Aug 23 2016 03:04:07 rr.bak
5 -rw- 836 Aug 23 2016 03:04:07 rr.dat
6 -rw- 28 Aug 23 2016 03:03:55 private-data.txt
7 drw- - Aug 23 2016 03:00:52 localuser
8 -rw- 64,011,164 Dec 15 2016 17:51:28 s5720li-v200r010c00spc600.cc
(2)配置交换机VLAN1 IP为10.10.10.1:
#interface Vlanif1
#ip address 10.10.10.1 255.255.255.0

(3)从交换机下载系统文件： <HUAWEI>tftp 10.10.10.2 put s5720li-v200r010c00spc600.cc
Info: Transfer file in binary mode.
Uploading the file to the remote TFTP server. Please wait...
100%
TFTP: Uploading the file successfully.
64011164 byte(s) sent in 1435 second(s).
<HUAWEI>

3.将系统文件上传致故障交换机的flash中，重启交换机，故障解决。 (1)机器重启生出现下面界面按Ctrl + B
INIT: version 2.88 bootingStarting udevStarting Bootlog daemon: bootlogd.Populating dev cacheINIT: Entering runlevel: 3ge = 5Stopping Bootlog daemon: bootlogd.
Wind River Linux 6.0.0.30 localhost console
localhost login: root (automatic login)login[1922]: root login on 'console'
Jan 23 2017, 19:21:20mknod: /dev/mvPP: File existsBootLoad version : 020a.0001Backup U-Boot ............................................................. done
Press Ctrl+B or Ctrl+E to enter BootLoad menu: 2

（2）进入下面启动菜单：

1）选择4
Enter your choice(1-8):

BootLoad Menu

1. Boot with default mode
2. Enter serial submenu
3. Enter startup submenu
4. Enter ethernet submenu
5. Enter filesystem submenu
6. Enter password submenu
7. Clear password for console user
8. Reboot
(Press Ctrl+E to enter diag menu)

Enter your choice(1-8): 4

2）选择4
ETHERNET SUBMENU

1. Update BootROM system
2. Download file to Flash through ethernet interface
3. Upload Configuration file to Ftp through ethernet interface
4. Modify ethernet interface boot parameter
5. Return to main menu

Enter your choice(1-5): 4

3）选择1，配置下载文件，指定交换机的IP,及tftp服务器也就是电脑的IP
BOOTLINE SUBMENU

1. Set TFTP protocol parameters
2. Set FTP protocol parameters
3. Return to ethernet menu

Enter your choice(1-3): 1

'.' = clear field; '-' = go to previous field; 'Ctrl+D' = quit

Load File name : s5720li-v200r010c00spc600.cc
Switch IP address : 10.10.10.1
Server IP address : 10.10.10.2

Starting to write BOOTLINE into flash ... done

4）选择3 返回
BOOTLINE SUBMENU

1. Set TFTP protocol parameters
2. Set FTP protocol parameters
3. Return to ethernet menu

Enter your choice(1-3): 3

5）选择2 下载文件到flash中
ETHERNET SUBMENU

1. Update BootROM system
2. Download file to Flash through ethernet interface
3. Upload Configuration file to Ftp through ethernet interface
4. Modify ethernet interface boot parameter
5. Return to main menu

Enter your choice(1-5): 2

Use tftp to download file : s5720li-v200r010c00spc600.cc , please wait for a moment.

...........................................................................................................................................................................................................................................................................................................................................................................................
Download file successfully.

6）选择5 返回
ETHERNET SUBMENU

1. Update BootROM system
2. Download file to Flash through ethernet interface
3. Upload Configuration file to Ftp through ethernet interface
4. Modify ethernet interface boot parameter
5. Return to main menu

Enter your choice(1-5): 5

6）选择1 设置默认启动模式
BootLoad Menu

1. Boot with default mode
2. Enter serial submenu
3. Enter startup submenu
4. Enter ethernet submenu
5. Enter filesystem submenu
6. Enter password submenu
7. Clear password for console user
8. Reboot
(Press Ctrl+E to enter diag menu)

Enter your choice(1-8): 1
Now, the current startup file is flash:/s5720li-v200r010c00spc600.cc

Info: Check signature, please wait............

System total memory is 0x15200000

Start to initialize the LSW ...
Initializing the LSW ...................................................... done
Initializing netlink ...................................................... done
Initializing fast netlink ................................................. done
Backup BootLoad ........................................................... done
Backup Kernel ............................................................. done
Backup RamDisk ............................................................ done

Stack status : enable
ECM Stack status : run

Initializing FSP task begin ...

Initializing DEV module ................................................... done

Initializing hardware system .............................................. done
Begin to start the system ...

Registering IPC and VP callback to platform ............................... done

Initializing VFS ..................................... Done
Checking startup system-software .......................................... done
Reading PAF file .......................................................... done
Initializing VOS monitor ............................. Done
CFM initialization advance ........................... done
Initializing PAT ..................................... Done
Initializing HA ...................................... done
VFS registering to HA ................................ Done

VRP root begin ...
VRP root end
CFG initialization begin ............................. done
CFM initialization begin ............................. done
CLI initialization begin ............................. done
Registering VRP all link command begin ............... Done
Creating task begin ...
Creating task end
Task initialization begin ...
Task initialization end

ECMM status : run
Cmd registering begin ...
Cmd registering end

Task awake begin ...
Task awake end

Recover configuration begin ...
Recover configuration end
Press ENTER to get started.

Login authentication

Username:admin
Password:

7）启动到输入用户名和密码的界面，证明交换机系统恢复完成。输入默认用户名和密码登录交换机：
用户名：admin
密码：admin@huawei.com