Centos宽带链接ADSL-pppoe

[root@localhost Desktop]# pppoe-setup

Welcome to the PPPoE client setup.  First, I will run some checks on

your system to make sure the PPPoE client is installed properly...

LOGIN NAME

Enter your Login Name (default sxc): XXXX（宽带拨号用户名）

INTERFACE

Enter the Ethernet interface connected to the PPPoE modem

For Solaris, this is likely to be something like /dev/hme0.

For Linux, it will be ethX, where 'X' is a number.

(default eth0): ###直接回车

Do you want the link to come up on demand, or stay up continuously?

If you want it to come up on demand, enter the idle time in seconds

after which the link should be dropped.  If you want the link to

stay up permanently, enter 'no' (two letters, lower-case.)

NOTE: Demand-activated links do not interact well with dynamic IP

addresses.  You may have some problems with demand-activated links.

Enter the demand value (default no): ###直接回车

DNS

Please enter the IP address of your ISP's primary DNS server.

If your ISP claims that 'the server will provide dynamic DNS addresses',

enter 'server' (all lower-case) here.

If you just press enter, I will assume you know what you are

doing and not modify your DNS setup.

Enter the DNS information here: 223.5.5.5（可以自己查找DNS输入）

Please enter the IP address of your ISP's secondary DNS server.

If you just press enter, I will assume there is only one DNS server.

Enter the secondary DNS server address here: 223.6.6.6

PASSWORD

Please enter your Password:###给定密码

Please re-enter your Password:

USERCTRL

Please enter 'yes' (three letters, lower-case.) if you want to allow

normal user to start or stop DSL connection (default yes): no

FIREWALLING

Please choose the firewall rules to use.  Note that these rules are

very basic.  You are strongly encouraged to use a more sophisticated

firewall setup; however, these will provide basic security.  If you

are running any servers on your machine, you must choose 'NONE' and

set up firewalling yourself.  Otherwise, the firewall rules will deny

access to all standard servers like Web, e-mail, ftp, etc.  If you

are using SSH, the rules will block outgoing SSH connections which

allocate a privileged source port.

The firewall choices are:

0 - NONE: This script will not set any firewall rules.  You are responsible

          for ensuring the security of your machine.  You are STRONGLY

          recommended to use some kind of firewall rules.

1 - STANDALONE: Appropriate for a basic stand-alone web-surfing workstation

2 - MASQUERADE: Appropriate for a machine acting as an Internet gateway

                for a LAN

Choose a type of firewall (0-2): 0

Start this connection at boot time

Do you want to start this connection at boot time?

Please enter no or yes (default no):yes

** Summary of what you entered **

Ethernet Interface: eth0

User name:          qqqq

Activate-on-demand: No

Primary DNS:        223.5.5.5

Secondary DNS:      223.6.6.6

Firewalling:        NONE

User Control:       no

Accept these settings and adjust configuration files (y/n)? y

Adjusting /etc/sysconfig/network-scripts/ifcfg-ppp0

Adjusting /etc/resolv.conf

Adjusting /etc/ppp/chap-secrets and /etc/ppp/pap-secrets

  (But first backing it up to /etc/ppp/chap-secrets.bak)

  (But first backing it up to /etc/ppp/pap-secrets.bak)

Congratulations, it should be all set up!

Type '/sbin/ifup ppp0' to bring up your xDSL link and '/sbin/ifdown ppp0'

to bring it down.

Type '/sbin/pppoe-status /etc/sysconfig/network-scripts/ifcfg-ppp0'

to see the link status.

配置多次网络也不稳定，有时候网络查超级慢，开始以为是LAN里arp欺骗。做了一下清除还是没效果。

最后关闭NetworkManager :service NetworkManager stop;

关闭pppoe后：pppoe-stop;

重新启动网络：service network restart

在重新启动pppoe和adsl：

[root@localhost Desktop]# pppoe-start

[root@localhost Desktop]# adsl-start

网络链接成功