ADB(Android debug bridge)
2017-07-11 13:24
351 查看
global options:
-a listen on all network interfaces, not just localhost
-d use USB device (error if multiple devices connected)
-e use TCP/IP device (error if multiple TCP/IP devices available)
-s SERIAL
use device with given serial number (overrides $ANDROID_SERIAL)
-p PRODUCT
name or path ('angler'/'out/target/product/angler');
default $ANDROID_PRODUCT_OUT
-H name of adb server host [default=localhost]
-P port of adb server [default=5037]
-L SOCKET listen on given socket for adb server [default=tcp:localhost:5037]
general commands:
devices [-l]
list connected devices (-l for long output)
help
show this help message
version
show version num
networking:
connect HOST[:PORT]
connect to a device via TCP/IP [default port=5555]
disconnect [HOST[:PORT]]
disconnect from given TCP/IP device [default port=5555], or all
forward --list
list all forward socket connections
forward [--no-rebind] LOCAL REMOTE
forward socket connection using:
tcp:<port> (<local> may be "tcp:0" to pick any open port)
localabstract:<unix domain socket name>
localreserved:<unix domain socket name>
localfilesystem:<unix domain socket name>
dev:<character device name>
jdwp:<process pid> (remote only)
forward --remove LOCAL
remove specific forward socket connection
forward --remove-all
remove all forward socket connections
ppp TTY [PARAMETER...]
run PPP over USB
reverse --list
list all reverse socket connections from device
reverse [--no-rebind] REMOTE LOCAL
reverse socket connection using:
tcp:<port> (<remote> may be "tcp:0" to pick any open port)
localabstract:<unix domain socket name>
localreserved:<unix domain socket name>
localfilesystem:<unix domain socket name>
reverse --remove REMOTE
remove specific reverse socket connection
reverse --remove-all
remove all reverse socket connections from device
file transfer:
push LOCAL... REMOTE
copy local files/directories to device
pull [-a] REMOTE... LOCAL
copy files/dirs from device
-a: preserve file timestamp and mode
sync [DIR]
copy all changed files to device; if DIR is "system", "vendor", "oem",
or "data", only sync that partition (default all)
-l: list but don't copy
shell:
shell [-e ESCAPE] [-n] [-Tt] [-x] [COMMAND...]
run remote shell command (interactive shell if no command given)
-e: choose escape character, or "none"; default '~'
-n: don't read from stdin
-T: disable PTY allocation
-t: force PTY allocation
-x: disable remote exit codes and stdout/stderr separation
emu COMMAND
run emulator console command
app installation:
install [-lrtsdg] PACKAGE
install-multiple [-lrtsdpg] PACKAGE...
push package(s) to the device and install them
-l: forward lock application
-r: replace existing application
-t: allow test packages
-s: install application on sdcard
-d: allow version code downgrade (debuggable packages only)
-p: partial application install (install-multiple only)
-g: grant all runtime permissions
uninstall [-k] PACKAGE
remove this app package from the device
'-k': keep the data and cache directories
backup/restore:
backup [-f FILE] [-apk|-noapk] [-obb|-noobb] [-shared|-noshared] [-all] [-system|-nosystem] [PACKAGE...]
write an archive of the device's data to FILE [default=backup.adb]
package list optional if -all/-shared are supplied
-apk/-noapk: do/don't back up .apk files (default -noapk)
-obb/-noobb: do/don't back up .obb files (default -noobb)
-shared|-noshared: do/don't back up shared storage (default -noshared)
-all: back up all installed applications
-system|-nosystem: include system apps in -all (default -system)
restore FILE
restore device contents from FILE
debugging:
bugreport [PATH]
write bugreport to given PATH [default=bugreport.zip];
if PATH is a directory, the bug report is saved in that directory.
devices that don't support zipped bug reports output to stdout.
jdwp
list pids of processes hosting a JDWP transport
logcat
show device log (logcat --help for more)
security:
disable-verity
disable dm-verity checking on userdebug builds
enable-verity
re-enable dm-verity checking on userdebug builds
keygen FILE
generate adb public/private key; private key stored in FILE,
public key stored in FILE.pub (existing files overwritten)
scripting:
wait-for[-TRANSPORT]-STATE
wait for device to be in the given state
State: device, recovery, sideload, or bootloader
Transport: usb, local, or any [default=any]
get-state
print offline | bootloader | device
get-serialno
print <serial-number>
get-devpath
print <device-path>
remount
remount /system, /vendor, and /oem partitions read-write
reboot [bootloader|recovery|sideload|sideload-auto-reboot]
reboot the device; defaults to booting system image but
supports bootloader and recovery too. sideload reboots
into recovery and automatically starts sideload mode,
sideload-auto-reboot is the same but reboots after sideloading.
sideload OTAPACKAGE
sideload the given full OTA package
root
restart adbd with root permissions
unroot
restart adbd without root permissions
usb
restart adb server listening on USB
tcpip PORT
restart adb server listening on TCP on PORT
internal debugging:
start-server
ensure that there is a server running
kill-server
kill the server if it is running
reconnect
kick connection from host side to force reconnect
reconnect device
kick connection from device side to force reconnect
environment variables:
$ADB_TRACE
comma-separated list of debug info to log:
all,adb,sockets,packets,rwx,usb,sync,sysdeps,transport,jdwp
$ADB_VENDOR_KEYS
colon-separated list of keys (files or directories)
$ANDROID_SERIAL
serial number to connect to (see -s)
$ANDROID_LOG_TAGS
tags to be used by logcat (see logcat --help)
-a listen on all network interfaces, not just localhost
-d use USB device (error if multiple devices connected)
-e use TCP/IP device (error if multiple TCP/IP devices available)
-s SERIAL
use device with given serial number (overrides $ANDROID_SERIAL)
-p PRODUCT
name or path ('angler'/'out/target/product/angler');
default $ANDROID_PRODUCT_OUT
-H name of adb server host [default=localhost]
-P port of adb server [default=5037]
-L SOCKET listen on given socket for adb server [default=tcp:localhost:5037]
general commands:
devices [-l]
list connected devices (-l for long output)
help
show this help message
version
show version num
networking:
connect HOST[:PORT]
connect to a device via TCP/IP [default port=5555]
disconnect [HOST[:PORT]]
disconnect from given TCP/IP device [default port=5555], or all
forward --list
list all forward socket connections
forward [--no-rebind] LOCAL REMOTE
forward socket connection using:
tcp:<port> (<local> may be "tcp:0" to pick any open port)
localabstract:<unix domain socket name>
localreserved:<unix domain socket name>
localfilesystem:<unix domain socket name>
dev:<character device name>
jdwp:<process pid> (remote only)
forward --remove LOCAL
remove specific forward socket connection
forward --remove-all
remove all forward socket connections
ppp TTY [PARAMETER...]
run PPP over USB
reverse --list
list all reverse socket connections from device
reverse [--no-rebind] REMOTE LOCAL
reverse socket connection using:
tcp:<port> (<remote> may be "tcp:0" to pick any open port)
localabstract:<unix domain socket name>
localreserved:<unix domain socket name>
localfilesystem:<unix domain socket name>
reverse --remove REMOTE
remove specific reverse socket connection
reverse --remove-all
remove all reverse socket connections from device
file transfer:
push LOCAL... REMOTE
copy local files/directories to device
pull [-a] REMOTE... LOCAL
copy files/dirs from device
-a: preserve file timestamp and mode
sync [DIR]
copy all changed files to device; if DIR is "system", "vendor", "oem",
or "data", only sync that partition (default all)
-l: list but don't copy
shell:
shell [-e ESCAPE] [-n] [-Tt] [-x] [COMMAND...]
run remote shell command (interactive shell if no command given)
-e: choose escape character, or "none"; default '~'
-n: don't read from stdin
-T: disable PTY allocation
-t: force PTY allocation
-x: disable remote exit codes and stdout/stderr separation
emu COMMAND
run emulator console command
app installation:
install [-lrtsdg] PACKAGE
install-multiple [-lrtsdpg] PACKAGE...
push package(s) to the device and install them
-l: forward lock application
-r: replace existing application
-t: allow test packages
-s: install application on sdcard
-d: allow version code downgrade (debuggable packages only)
-p: partial application install (install-multiple only)
-g: grant all runtime permissions
uninstall [-k] PACKAGE
remove this app package from the device
'-k': keep the data and cache directories
backup/restore:
backup [-f FILE] [-apk|-noapk] [-obb|-noobb] [-shared|-noshared] [-all] [-system|-nosystem] [PACKAGE...]
write an archive of the device's data to FILE [default=backup.adb]
package list optional if -all/-shared are supplied
-apk/-noapk: do/don't back up .apk files (default -noapk)
-obb/-noobb: do/don't back up .obb files (default -noobb)
-shared|-noshared: do/don't back up shared storage (default -noshared)
-all: back up all installed applications
-system|-nosystem: include system apps in -all (default -system)
restore FILE
restore device contents from FILE
debugging:
bugreport [PATH]
write bugreport to given PATH [default=bugreport.zip];
if PATH is a directory, the bug report is saved in that directory.
devices that don't support zipped bug reports output to stdout.
jdwp
list pids of processes hosting a JDWP transport
logcat
show device log (logcat --help for more)
security:
disable-verity
disable dm-verity checking on userdebug builds
enable-verity
re-enable dm-verity checking on userdebug builds
keygen FILE
generate adb public/private key; private key stored in FILE,
public key stored in FILE.pub (existing files overwritten)
scripting:
wait-for[-TRANSPORT]-STATE
wait for device to be in the given state
State: device, recovery, sideload, or bootloader
Transport: usb, local, or any [default=any]
get-state
print offline | bootloader | device
get-serialno
print <serial-number>
get-devpath
print <device-path>
remount
remount /system, /vendor, and /oem partitions read-write
reboot [bootloader|recovery|sideload|sideload-auto-reboot]
reboot the device; defaults to booting system image but
supports bootloader and recovery too. sideload reboots
into recovery and automatically starts sideload mode,
sideload-auto-reboot is the same but reboots after sideloading.
sideload OTAPACKAGE
sideload the given full OTA package
root
restart adbd with root permissions
unroot
restart adbd without root permissions
usb
restart adb server listening on USB
tcpip PORT
restart adb server listening on TCP on PORT
internal debugging:
start-server
ensure that there is a server running
kill-server
kill the server if it is running
reconnect
kick connection from host side to force reconnect
reconnect device
kick connection from device side to force reconnect
environment variables:
$ADB_TRACE
comma-separated list of debug info to log:
all,adb,sockets,packets,rwx,usb,sync,sysdeps,transport,jdwp
$ADB_VENDOR_KEYS
colon-separated list of keys (files or directories)
$ANDROID_SERIAL
serial number to connect to (see -s)
$ANDROID_LOG_TAGS
tags to be used by logcat (see logcat --help)
相关文章推荐
- adb端口被占用,描述为android debug bridge的adb.exe无法结束
- ADB (android debug bridge)
- Unable to create Debug Bridge:Unable to start adb server 原创 2016年07月07日 10:05:14 5596 打开Android stu
- adb-Android debug bridge(安卓调试桥)
- Android Debug Bridge (adb)
- Android Debug Bridge(adb)-百度
- android debug bridge(adb)的使用
- Android Debug Bridge(ADB)学习总结
- Using Android Debug Bridge (ADB) via TCP/IP
- Android开发中常用的Android Debug Bridge(ADB)指令
- Help of ADB(Android Debug Bridge)
- Android Debug Bridge(ADB) 技术实现(译)(转)
- Using Android Debug Bridge (ADB) over Wifi
- Android Debug Bridge (adb) device - no permissions
- HOW TO SET UP ADB (ANDROID DEBUG BRIDGE) IN MAC OSX
- Android Debug Bridge (adb)
- VS android应用启动调试Could not locate the Android Debug Bridge (adb.exe)
- Android Debug Bridge (ADB)的使用
- Android Debug Bridge(adb)
- Android debug bridge command line-adb shell tips -logcat/am/pm/dumpsys