小区删建流程,小区重配流程总结
2017-07-03 14:24
211 查看
1.LTE proceduce
i) UE is Off
ii) Power On UE
iii) < Frequency Search >
iv) < Timing Sync >
v) < Cell Search > : Normally a UE would find multiple cells in this process
vi) < Cell Selection >
vii) MIB decoding
viii) SIB deconding
ix) < Initial RACH Process >
x) < Registration/Authentication/Attach>
xi) < Default EPS Bearer Setup >
xii) Now UE is in IDLE Mode
xiii) <(If the current cell become weak or UE moves to another cell regisn) Cell Reselection>
xiv) <(When Paging message comes or User make a call) RACH Process>
xv) < Setup Dedicated EPS Bearer >
xv) Receive data
xvi) Transmit data
xvii) (If UE power is percieved too weak by the network) Network send TPC command to increase UE Tx Power
xviii) (If UE power is percieved too strong by the network) Network send TPC command to decrease UE Tx Power
xix) < (If UE moves to another cell region) Network and UE perform Handover procedure >
xx) User stop call and UE gets into IDLE mode
2.小区建立流程
3.小区重配流程
4.小区删建流程
i) UE is Off
ii) Power On UE
iii) < Frequency Search >
iv) < Timing Sync >
v) < Cell Search > : Normally a UE would find multiple cells in this process
vi) < Cell Selection >
vii) MIB decoding
viii) SIB deconding
ix) < Initial RACH Process >
x) < Registration/Authentication/Attach>
xi) < Default EPS Bearer Setup >
xii) Now UE is in IDLE Mode
xiii) <(If the current cell become weak or UE moves to another cell regisn) Cell Reselection>
xiv) <(When Paging message comes or User make a call) RACH Process>
xv) < Setup Dedicated EPS Bearer >
xv) Receive data
xvi) Transmit data
xvii) (If UE power is percieved too weak by the network) Network send TPC command to increase UE Tx Power
xviii) (If UE power is percieved too strong by the network) Network send TPC command to decrease UE Tx Power
xix) < (If UE moves to another cell region) Network and UE perform Handover procedure >
xx) User stop call and UE gets into IDLE mode
2.小区建立流程
3.小区重配流程
4.小区删建流程
相关文章推荐
- 关于Linux系统下Grub启动流程的讨论总结
- 业务流程定义语言规范总结
- 大中型软件项目开发步骤流程总结
- C# 学习总结 之 流程控制
- exchange2003系列总结:-5邮件加密与签名的工作流程
- 总结一下U-Boot的编译流程,uboot
- Struts1.X 开发原理、流程(自己总结)
- WCDMA呼叫流程总结zz
- C# 学习总结 之 流程控制
- netfilter各个HOOK的关系简介(笔记中已经总结到函数调用流程中)
- JAD安装流程以及常见问题总结分享
- smarty 流程控制总结
- 业务流程定义语言规范总结
- 业务流程定义语言规范总结
- 业务流程定义语言规范总结
- Java控制程序流程总结
- SQL常用流程控制语句总结来源
- 最近几天在winform系统界面操作,流程操作上的经验总结.
- 测试流程总结
- 关于Boot Loader的启动流程和开发经验总结