redis安装和基本使用
2017-07-03 09:15
573 查看
下载地址:https://github.com/MSOpenTech/redis/releases这个要根据你的系统来下载,有64位和32位
一、 Redis 介绍
二、 Redis 性能介绍
三、 Redis 功能
四、 Redis 安装及配置
五、 Redis 启动
六、 Redis 的数据类型
七、 Redis 的 master/slave 配置
声明:本文档仅供学习参考之用,如有错误和其他观点,请访问 http://bbs.linuxtone.org 或
Email 本人
Redis 介绍
Redis 本质上一个 Key/Value 数据库,与 Memcached 类似的 NoSQL 型数据库,但是他的
数据可以持久化的保存在磁盘上,解决了服务重启后数据不丢失的问题,他的值可以是 string
(字符串)、list(列表)、sets(集合)或者是 ordered sets(被排序的集合),所有的数据
类型都具有 push/pop、add/remove、执行服务端的并集、交集、两个 sets 集中的差别等等
操作,这些操作都是具有原子性的,Redis 还支持各种不同的排序能力
Redis 2.0 更是增加了很多新特性,如:提升了性能、增加了新的数据类型、更少的利用
内存(AOF 和 VM)
Redis 支持绝大部分主流的开发语言,如:C、Java、C#、PHP、Perl、Python、Lua、Erlang、
Ruby 等等
Redis 性能:
根据 Redis 官方的测试结果:在 50 个并发的情况下请求 10w 次,写的速度是 110000
次/s,读的速度是 81000 次/s
测试环境:
1. 50 个并发,请求 100000 次
2. 读和写大小为 256bytes 的字符串
3. Linux2.6 Xeon X3320 2.5GHz 的服务器上
IT 运维专家网 http://www.LinuxTone.Org
4. 通过本机的 loopback interface 接口上执行
地址:http://code.google.com/p/redis/wiki/Benchmarks
Redis 的功能:
1、Redis 的 Sharding:Redis 支持客户端的 Sharding 功能,通过一致性 hash 算法实现,
当前 Redis 不支持故障冗余,在集群中不能在线增加或删除Redis
2、Redis 的 master/slave 复制:
1. 一个 master 支持多个 slave
2. Slave 可以接受其他 slave 的连接来替代他连接 master
3. 复制在 master 是非阻塞的,而在 slave 是阻塞的
4. 复制被利用来提供可扩展性,在 slave 端只提供查询功能及数据的冗余
3、Redis 的 Virtual Memory 功能:vm 是 Redis2.0 新增的一个非常稳定和可靠的功能,
vm 的引入是为了提高Redis 的性能,也就是把很少使用的 value 保存到 disk,而 key 保存在
内存中。实际上就是如果你有 10w 的 keys 在内存中,而只有仅仅 10%左右的 key 经常使用,
那么 Redis 可以通过开启 VM 尝试将不经常使用的 Value 转换到 disk 上保存
4、Redis 的附加档案(AOF)功能:Redis 通过配置的策略将数据集保存到 aof 中,当
Redis 挂掉后能够通过 aof 恢复到挂掉前的状态
Redis 的安装及配置:
下载 Redis:wget http://redis.googlecode.com/files/redis-2.0.0-rc4.tar.gz
[falcon@www.fwphp.cn ~/src]$ tar xvzf redis-2.0.0-rc4.tar.gz
[falcon@www.fwphp.cn ~/src]$ cd redis-2.0.0-rc4
[falcon@www.fwphp.cn ~/src/redis-2.0.0-rc4]$ make
[falcon@www.fwphp.cn ~/src/redis-2.0.0-rc4]$ mkdir ~/redis-2.0.0
[falcon@www.fwphp.cn ~/src/redis-2.0.0-rc4]$cp redis-server ~/redis-2.0.0
[falcon@www.fwphp.cn ~/src/redis-2.0.0-rc4]$cp redis-benchmark ~/redis-2.0.0
[falcon@www.fwphp.cn ~/src/redis-2.0.0-rc4]$cp redis-cli ~/redis-2.0.0
[falcon@www.fwphp.cn ~/src/redis-2.0.0-rc4]$cp redis.conf ~/redis-2.0.0
[falcon@www.fwphp.cn ~/src/redis-2.0.0-rc4]$ cd ~/redis-2.0.0/
配置 redis.conf 配置文件:
#是否作为守护进程运行
daemonize yes
#配置 pid 的存放路径及文件名,默认为当前路径下
pidfile redis.pid
#Redis 默认监听端口
port 6379
#客户端闲置多少秒后,断开连接
timeout 300
#日志显示级别
loglevel verbose
IT 运维专家网 http://www.LinuxTone.Org
#指定日志输出的文件名,也可指定到标准输出端口
logfile stdout
#设置数据库的数量,默认连接的数据库是 0,可以通过 select N 来连接不同的数据库
databases 16
#保存数据到 disk 的策略
#当有一条 Keys 数据被改变是,900 秒刷新到 disk 一次
save 900 1
#当有 10 条 Keys 数据被改变时,300 秒刷新到 disk 一次
save 300 10
#当有 1w 条 keys 数据被改变时,60 秒刷新到 disk 一次
save 60 10000
#当 dump .rdb 数据库的时候是否压缩数据对象
rdbcompression yes
#dump 数据库的数据保存的文件名
dbfilename dump.rdb
#Redis 的工作目录
dir /home/falcon/redis-2.0.0/
########### Replication #####################
#Redis 的复制配置
# slaveof <masterip> <masterport>
# masterauth <master-password>
############## SECURITY ###########
# requirepass foobared
############### LIMITS ##############
#最大客户端连接数
# maxclients 128
#最大内存使用率
# maxmemory <bytes>
########## APPEND ONLY MODE #########
#是否开启日志功能
appendonly no
# 刷新日志到 disk 的规则
# appendfsync always
appendfsync everysec
# appendfsync no
################ VIRTUAL MEMORY ###########
#是否开启 VM 功能
vm-enabled no
# vm-enabled yes
vm-swap-file logs/redis.swap
vm-max-memory 0
IT 运维专家网 http://www.LinuxTone.Org
vm-page-size 32
vm-pages 134217728
vm-max-threads 4
############# ADVANCED CONFIG ###############
glueoutputbuf yes
hash-max-zipmap-entries 64
hash-max-zipmap-value 512
#是否重置 Hash 表
activerehashing yes
启动 Redis
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-server redis.conf
检测 Redis 是否启动:
[falcon@www.fwphp.cn ~/redis-2.0.0]$ netstat -an -t
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 0.0.0.0:10022 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:6379 0.0.0.0:* LISTEN
……..
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ps -ef|grep redis-server
falcon 7663 1 0 02:29 ? 00:00:00 ./redis-server redis.conf
Redis 的 数据类型 :
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli -h
usage: redis-cli [-h host] [-p port] [-a authpw] [-r repeat_times] [-n db_num] [-i] cmd arg1 arg2
arg3 ... argN
usage: echo "argN" | redis-cli -c [-h host] [-p port] [-a authpw] [-r repeat_times] [-n db_num] cmd
arg1 arg2 ... arg(N-1)
Redis 根据 5 种不同的数据类型来操作数据对象:
操作 String 类型的值:
Command Parameters Description
SET key value Set a key to a string value
GET key Return the string value of the key
GETSET key value Set a key to a string returning the old value of the
key
MGET key1 key2 ... keyN Multi-get, return the strings values of the keys
SETNX key value Set a key to a string value if the key does not exist
SETEX key time value Set+Expire combo command
IT 运维专家网 http://www.LinuxTone.Org
MSET key1 value1 key2 value2 ... keyN valueN Set multiple keys to multiple
values in a single atomic operation
MSETNX key1 value1 key2 value2 ... keyN valueN Set multiple keys to multiple
values in a single atomic operation if none of the keys already exist
INCR key Increment the integer value of key
INCRBY key integer Increment the integer value of key by integer
DECR key Decrement the integer value of key
DECRBY key integer Decrement the integer value of key by integer
APPEND key value Append the specified string to the string stored at
key
SUBSTR key start end Return a substring of a larger string
操作方法:
SET 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli -n 0 set uid_001 Falcon.C
OK
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli -n 0 set uid_002 Falcon
OK
表示向数据库 0 中插入字符串 key 为 uid_001,value 为 Falcon.C 的字符串
GET 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli -n 0 get uid_001
"Falcon.C"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-c
4000
li get uid_001
"Falcon.C"
表示获取数据库为 0,key 为 uid_001 的字符串,因为在不指定数据编号的情况下,默认连
接的是 0 数据库,所以可以省略-n 参数
GETSET 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli getset uid_002 "falcom520@gmail.com"
"Falcon"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli get uid_002
falcom520@gmail.com
表示返回指定 key 的原始值,并指定一个新值给他
MGET 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli mget uid_001 uid_002
1. "Falcon.C"
2. "falcom520@gmail.com"
表示获取多个 key 的值
SETNX 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli setnx uid_001_email "falcom520@126.com"
IT 运维专家网 http://www.LinuxTone.Org
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli get uid_001_email
"falcom520@126.com"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli setnx uid_001_email "falcom520@126.com"
(integer) 0
表示当一个指定的 key 不存在时,设置这个 key 指定的 value,如果存在,则设置不成功
SETEX 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli setex uid_001_msn 5 "falcom520@126.com"
OK
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli get uid_001_msn
"falcom520@126.com"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli get uid_001_msn
(nil)
表示设置一个 key 指定的value 保存 5 秒后失效,设置 key/value 的有效期
MSET 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli mset uid0001 "0001" uid0002 "0002"
uid0003 "0003"
OK
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli mget uid0001 uid0002 uid0003
1. "0001"
2. "0002"
3. "0003"
表示多键值对的数据保存,在保证原子操作性的情况下
MSETNX 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli msetnx uid0003 "0003" uid0004 "0004"
uid0005 "0005"
(integer) 0
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli msetnx uid0004 "0004" uid0005 "0005"
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli mget uid0001 uid0002 uid0003 uid0004
uid0005
1. "0001"
2. "0002"
3. "0003"
4. "0004"
5. "0005"
表示在单原子操作性的情况下,keys 不存在的前提下插入多个 values值,如果存在其中一个
keys 则插入失败
INCR 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli incr uid
IT 运维专家网 http://www.LinuxTone.Org
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli incr uid
(integer) 2
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli incr uid
(integer) 3
表示对给定 key 的 value进行递增的操作
INCRBY 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli incrby uid 5
(integer) 8
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli incrby uid 5
(integer) 13
表示对给定 key 的 value进行指定步长的递增操作
DECR 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli decr uid
(integer) 12
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli decr uid
(integer) 11
表示对给定的 key 的 value 进行递减操作
DECRBY 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli decrby uid 3
(integer) 8
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli decrby uid 3
(integer) 5
表示对给定 key 的 value做指定步长的递减操作
APPEND 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli append content "01234"
(integer) 5
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli get content
"01234"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli append content "56789"
(integer) 10
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli get content
"0123456789"
表示追加一个 value 到指定的 key 中,如果 key 不存在,则新建 key
SUBSTR 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli substr content 0 4
"01234"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli substr content 5 10
"56789"
IT 运维专家网 http://www.LinuxTone.Org
表示返回指定 key 的 value 的部分字符串
作 操作 lists 类型的值:(列表)
Command Parameters Description
RPUSH key value Append an element to the tail of the List value at key
LPUSH key value Append an element to the head of the List value at key
LLEN key Return the length of the List value at key
LRANGE key start end Return a range of elements from the List at key
LTRIM key start end Trim the list at key to the specified range of elements
LINDEX key index Return the element at index position from the List at key
LSET key index value Set a new value as the element at index position of the
List at key
LREM key count value Remove the first-N, last-N, or all the elements matching
value from the List at key
LPOP key Return and remove (atomically) the first element of the
List at key
RPOP key Return and remove (atomically) the last element of the
List at key
BLPOP key1 key2 ... keyN timeout Blocking LPOP
BRPOP key1 key2 ... keyN timeout Blocking RPOP
RPOPLPUSH srckey dstkey Return and remove (atomically) the last element of the
source List stored at srckey and push the same element to the destination List stored at dstkey
RPUSH 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli rpush list_001 0000001
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli rpush list_001 0000002
(integer) 2
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli rpush list_001 0000003
(integer) 3
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli lrange list_001 0 3
1. "0000001"
2. "0000002"
3. "0000003"
表示向指定 key 的 list 的后面(右边)追加指定的 value
LPUSH 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli lpush list_001 000099
(integer) 4
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli lpush list_001 000098
(integer) 5
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli lpush list_001 000097
(integer) 6
IT 运维专家网 http://www.LinuxTone.Org
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli lrange list_001 0 8
1. "000097"
2. "000098"
3. "000099"
4. "0000001"
5. "0000002"
6. "0000003"
表示向指定 key 的 list 的前面(左边)追加指定的 value
LLEN 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli llen list_001
(integer) 6
表示返回指定 key list 的长度
LRANGE 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli lrange list_001 2 4
1. "000099"
2. "0000001"
3. "0000002"
表示返回指定 key list 里面的位置的范围 value
LTRIM 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli ltrim list_001 0 2
OK
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli lrange list_001 0 4
1. "000097"
2. "000098"
3. "000099"
表示删除指定 key 的值范围以外的数据
LINDEX 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli lrange list_001 0 9
1. "000097"
2. "000098"
3. "000099"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli lindex list_001 2
"000099"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli lindex list_001 1
"000098"
表示返回指定 key list 里面索引的值
LSET 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli lrange list_001 0 9
1. "000097"
IT 运维专家网 http://www.LinuxTone.Org
2. "000098"
3. "000099"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli lset list_001 0 "100097"
OK
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli lrange list_001 0 9
1. "100097"
2. "000098"
3. "000099"
表示给指定 key 的 list 里面指定索引的值修改为一个新值
LREM 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli lpush list_001 000099
(integer) 4
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli lpush list_001 000099
(integer) 5
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli lpush list_001 000099
(integer) 6
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli lrange list_001 0 9
1. "000099"
2. "000099"
3. "000099"
4. "100097"
5. "000098"
6. "000099"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli lrem list_001 2 000099
(integer) 2
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli lrange list_001 0 9
1. "000099"
2. "100097"
3. "000098"
4. "000099"
表示删除指定 key 的 list 里面值为 value 的指定个数
LPOP 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli lrange list_001 0 9
1. "000099"
2. "100097"
3. "000098"
4. "000099"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli lpop list_001
"000099"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli lrange list_001 0 9
1. "100097"
2. "000098"
IT 运维专家网 http://www.LinuxTone.Org
3. "000099"
表示删除指定 key 的 list里面最前面(左边)的值,并返回该值
RPOP 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli lrange list_001 0 9
1. "100097"
2. "000098"
3. "000099"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli rpop list_001
"000099"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli lrange list_001 0 9
1. "100097"
2. "000098"
表示删除指定 key 的 list里面最后面(右边)的值,并返回该值
BLPOP 和 BRPOP 操作
在阻塞的模式下执行 LPOP 和 RPOP 操作
RPOPLPUSH 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli lrange list_001 0 9
1. "100097"
2. "000098"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli rpoplpush list_001 list_999
"000098"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli lrange list_001 0 9
1. "100097"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli lrange list_999 0 6
1. "000098"
表示将原 key 的 list 后面(右边)的值删掉,并保存到指定的目的 key 中,并返回该值
操作 sets 类型的值:(sets 集合)
Command Parameters Description
SADD key member Add the specified member to the Set value at key
SREM key member Remove the specified member from the Set value at key
SPOP key Remove and return (pop) a random element from the Set
value at key
SMOVE srckey dstkey member Move the specified member from one Set to another
atomically
SCARD key Return the number of elements (the cardinality) of the Set at
key
SISMEMBER key member Test if the specified value is a member of the Set at key
SINTER key1 key2 ... keyN Return the intersection between the Sets stored at key1,
key2, ..., keyN
IT 运维专家网 http://www.LinuxTone.Org
SINTERSTORE dstkey key1 key2 ... keyN Compute the intersection between the Sets stored at key1,
key2, ..., keyN, and store the resulting Set at dstkey
SUNION key1 key2 ... keyN Return the union between the Sets stored at key1, key2, ...,
keyN
SUNIONSTORE dstkey key1 key2 ... keyN Compute the union between the Sets stored at
key1, key2, ..., keyN, and store the resulting Set at dstkey
SDIFF key1 key2 ... keyN Return the difference between the Set stored at key1 and all
the Sets key2, ..., keyN
SDIFFSTORE dstkey key1 key2 ... keyN Compute the difference between the Set key1
and all the Sets key2, ..., keyN, and store the resulting Set at
dstkey
SMEMBERS key Return all the members of the Set value at key
SRANDMEMBER key Return a random member of the Set value at key
SADD 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli sadd s_001 "Falcon.C"
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli sadd s_001 "Falcon"
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli smembers s_001
1. "Falcon"
2. "Falcon.C"
表示向指定 key 的集合中添加成员
SREM 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli smembers s_001
1. "Falcon"
2. "Falcon.C"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli srem s_001 Falcon
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli smembers s_001
1. "Falcon.C"
表示删除指定 key 的指定Value 成员值
SPOP 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli smembers s_001
1. "Falcon.C"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli sadd s_001 "www.linuxtone.org"
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli sadd s_001 "bbs.linuxtone.org"
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli sadd s_001 "uc.linuxtone.org"
IT 运维专家网 http://www.LinuxTone.Org
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli smembers s_001
1. "www.linuxtone.org"
2. "Falcon.C"
3. "bbs.linuxtone.org"
4. "uc.linuxtone.org"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli spop s_001
"www.linuxtone.org"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli smembers s_001
1. "Falcon.C"
2. "bbs.linuxtone.org"
3. "uc.linuxtone.org"
表示从指定 key 的 set 集中随机删除一个成员 value 并返回
SMOVE 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli smembers s_001
1. "Falcon.C"
2. "bbs.linuxtone.org"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli smove s_001 s_002 bbs.linuxtone.org
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli smembers s_001
1. "Falcon.C"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli smembers s_002
1. "bbs.linuxtone.org"
表示从一个指定的 key 中移动一个指定的 value 成员到另一个指定的key 中,这些操作是具
有原子性的
SCARD 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli scard s_001
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli scard s_002
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli smembers s_001
1. "Falcon.C"
表示返回指定 key 的 set集的 value 成员个数
SISMEMBER 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli smembers s_001
1. "Falcon.C"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli sismember s_001 Falcon
(integer) 0
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli sismember s_001 Falcon.C
(integer) 1
表示判断指定的 key 的成员是否存在于 sets 集中
IT 运维专家网 http://www.LinuxTone.Org
SINTER 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli sadd s_001 "000001"
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli sadd s_001 "000002"
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli smembers s_001
1. "Falcon.C"
2. "000001"
3. "000002"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli smembers s_002
1. "bbs.linuxtone.org"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli sadd s_002 "000001"
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli sadd s_002 "000002"
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli smembers s_002
1. "000001"
2. "bbs.linuxtone.org"
3. "000002"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli sinter s_001 s_002
1. "000001"
2. "000002"
表示对指定的 key 的 sets 集执行交集操作,返回指定 sets 集合中相同的 value 成员
SINTERSTORE 操作
[falcon@www
dc14
.fwphp.cn ~/redis-2.0.0]$ ./redis-cli sadd s_001 "000003"
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli sadd s_001 "00000099"
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli smembers s_001
1. "000003"
2. "Falcon.C"
3. "000001"
4. "000002"
5. "00000099"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli sadd s_002 "000003"
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli sadd s_002 "00000099"
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli smembers s_002
1. "000003"
2. "000001"
3. "bbs.linuxtone.org"
IT 运维专家网 http://www.LinuxTone.Org
4. "000002"
5. "00000099"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli smembers s_002
1. "000003"
2. "000001"
3. "bbs.linuxtone.org"
4. "000002"
5. "00000099"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli sinterstore s_003 s_001 s_002
(integer) 4
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli smembers s_003
1. "000003"
2. "000001"
3. "00000099"
4. "000002"
表示将指定的 key 的 sets 集做交集,并将结果保存到指定的 key 中
SUNION 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli smembers s_001
1. "000003"
2. "Falcon.C"
3. "000001"
4. "000002"
5. "00000099"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli smembers s_002
1. "000003"
2. "bbs.linuxtone.org"
3. "000001"
4. "000002"
5. "00000099"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli sunion s_001 s_002
1. "000003"
2. "Falcon.C"
3. "000001"
4. "bbs.linuxtone.org"
5. "000002"
6. "00000099"
表示对指定的 key 的 sets 集合做并集
SUNIONSTORE 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli smembers s_001
1. "000003"
2. "Falcon.C"
3. "000001"
IT 运维专家网 http://www.LinuxTone.Org
4. "000002"
5. "00000099"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli smembers s_002
1. "000003"
2. "bbs.linuxtone.org"
3. "000001"
4. "000002"
5. "00000099"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli sunionstore s_004 s_001 s_002
(integer) 6
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli smembers s_004
1. "000003"
2. "Falcon.C"
3. "000001"
4. "bbs.linuxtone.org"
5. "000002"
6. "00000099"
表示对指定的 key 的 sets 集做并集,并将结果保存到指定的 key 中
SDIFF 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli smembers s_001
1. "000003"
2. "Falcon.C"
3. "000001"
4. "000002"
5. "00000099"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli smembers s_002
1. "000003"
2. "bbs.linuxtone.org"
3. "000001"
4. "000002"
5. "00000099"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli sdiff s_001 s_002 s_003 s_004
(empty list or set)
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli sdiff s_001 s_002
1. "Falcon.C"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli sdiff s_001 s_003
1. "Falcon.C"
表示对给定的第一个 key的 sets 集合与其他的 key的 sets 集合的 value 进行对比,并返回不
同的 value 的成员
SDIFFSTORE 操作
Sdiffstore 与 sdiff 操作一样,只是把不同的 sets 集合成员保存到一个给定的 key 的 sets 集合
IT 运维专家网 http://www.LinuxTone.Org
中
SMEMBERS 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli smembers s_004
1. "000003"
2. "Falcon.C"
3. "000001"
4. "bbs.linuxtone.org"
5. "000002"
6. "00000099"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli smembers s_003
1. "000003"
2. "000001"
3. "00000099"
4. "000002"
表示返回指定 key 的所有sets 集合的成员
SRANDMEMBER 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli smembers s_003
1. "000003"
2. "000001"
3. "00000099"
4. "000002"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli srandmember s_003
"000001"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli srandmember s_003
"000002"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli srandmember s_003
"000002"
表示返回一个给定 key 的sets 集合中随机的一个成员
操作 zsets 类型的值:(排序后的 sets 集合)
Command Parameters Description
ZADD key score member Add the specified member to the Sorted Set value at key
or update the score if it already exist
ZREM key member Remove the specified member from the Sorted Set value
at key
ZINCRBY key increment member If the member already exists increment its score by
increment, otherwise add the member setting increment
as score
ZRANK key member Return the rank (or index) or member in the sorted set at
key, with scores being ordered from low to high
IT 运维专家网 http://www.LinuxTone.Org
ZREVRANK key member Return the rank (or index) or member in the sorted set at
key, with scores being ordered from high to low
ZRANGE key start end Return a range of elements from the sorted set at key
ZREVRANGE key start end Return a range of elements from the sorted set at key,
exactly like ZRANGE, but the sorted set is ordered in
traversed in reverse order, from the greatest to the
smallest score
ZRANGEBYSCORE key min max Return all the elements with score >= min and score <=
max (a range query) from the sorted set
ZCOUNT key min max Return the number of elements with score >= min and
score <= max in the sorted set
ZCARD key Return the cardinality (number of elements) of the sorted
set at key
ZSCORE key element Return the score associated with the specified element of
the sorted set at key
ZREMRANGEBYRANK key min max Remove all the elements with rank >= min and rank <=
max from the sorted set
ZREMRANGEBYSCORE key min max Remove all the elements with score >= min and score <=
max from the sorted set
ZUNIONSTORE / ZINTERSTORE dstkey N key1 ... keyN WEIGHTS w1 ... wN AGGREGATE
SUM|MIN|MAX Perform a union or intersection over a number of sorted sets with optional
weight and aggregate
ZADD 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zadd z_001 1 "Falcon.C"
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zadd z_001 1 "Falcon"
(integer) 0
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zadd z_001 1 "LinuxTone"
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zrange z_001 0 4
1. "Falcon"
2. "Falcon.C"
3. "LinuxTone"
表示通过给定的积分顺序插入成员值到指定的 key 的顺序 sets 集合中,如果成员存在则插入
失败
ZREM 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zrange z_001 0 4
1. "Falcon"
2. "Falcon.C"
3. "LinuxTone"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zrem z_001 Falcon
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zrange z_001 0 4
IT 运维专家网 http://www.LinuxTone.Org
1. "Falcon.C"
2. "LinuxTone"
表示从给定的 key 的顺序sets 集合中删除指定的成员
ZINCRBY 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zrange z_001 0 4
1. "Falcon.C"
2. "LinuxTone"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zincrby z_001 2 Falcon.C
"3"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zrange z_001 0 8
1. "LinuxTone"
2. "Falcon.C"
表示给指定的 key 的成员的排序积分进行给定的递增值的递增,如果积分为零,则将递增值
作为积分排序
ZRANK 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zrange z_001 0 8
1. "LinuxTone"
2. "0"
3. "Falcon.C"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zrank z_001 Falcon.C
(integer) 2
表示获取当前指定 key 的成员在排序 sets 集合中的排名,从 0 开始计数(正序)
ZREVRANK 操作
与 ZRANK 一样,从 0 开始计数(倒序)
ZRANGE 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zrange z_001 0 8
1. "LinuxTone"
2. "0"
3. "Falcon.C"
表示通过开始值和结束值来获取指定 key 的排序 sets 集合中的成员范围
ZREVRANGE 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zrange z_001 0 2
1. "LinuxTone"
2. "0"
3. "Falcon.C"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zrange z_001 0 1
1. "LinuxTone"
2. "0"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zrevrange z_001 0 1
IT 运维专家网 http://www.LinuxTone.Org
1. "Falcon.C"
2. "0"
表示通过对指定 key 的排序 sets 集合倒序后在获取指定范围的成员集
ZRANGEBYSCORE 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zadd z_001 1 "linuxtone.org"
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zadd z_001 2 "qq.com"
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zadd z_001 3 "google.com"
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zrange z_001 0 10
1. "linuxtone.org"
2. "LinuxTone"
3. "qq.com"
4. "google.com"
5. "0"
6. "Falcon.C"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zrangebyscore z_001 2 4
1. "LinuxTone"
2. "qq.com"
3. "google.com"
表示获取指定 key 的积分范围的排序 sets 集合的成员
ZCOUNT 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zrange z_001 0 10
1. "linuxtone.org"
2. "LinuxTone"
3. "qq.com"
4. "google.com"
5. "0"
6. "Falcon.C"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zcount z_001 2 4
(integer) 3
表示获取指定 key 的积分范围的排序 sets 集合的成员数量
ZCARD 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zrange z_001 0 10
1. "linuxtone.org"
2. "LinuxTone"
3. "qq.com"
4. "google.com"
5. "0"
6. "Falcon.C"
IT 运维专家网 http://www.LinuxTone.Org
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zcard z_001
(integer) 6
表示获取指定 key 的排序sets 集合的成员基数
ZSCORE 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zrange z_001 0 10
1. "linuxtone.org"
2. "LinuxTone"
3. "qq.com"
4. "google.com"
5. "0"
6. "Falcon.C"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zscore z_001 0
"5"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zscore z_001 qq.com
"2"
表示获取指定 key 的排序sets 集合中成员的积分
ZREMRANGEBYRANK 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zrange z_001 0 10
1. "linuxtone.org"
2. "LinuxTone"
3. "qq.com"
4. "google.com"
5. "0"
6. "Falcon.C"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zremrangebyrank z_001 4 5
(integer) 2
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zrange z_001 0 10
1. "linuxtone.org"
2. "LinuxTone"
3. "qq.com"
4. "google.com"
表示删除指定 key 的排序sets 集合中成员的排名范围的成员(通过排名范围删除成员)
ZREMRANGEBYSCORE 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zrange z_001 0 10
1. "linuxtone.org"
2. "LinuxTone"
3. "qq.com"
4. "google.com"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zscore z_001 linuxtone.org
"1"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zscore z_001 LinuxTone
IT 运维专家网 http://www.LinuxTone.Org
"2"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zscore z_001 qq.com
"2"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zscore z_001 google.com
"3"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zremrangebyscore z_001 2 2
(integer) 2
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zrange z_001 0 10
1. "linuxtone.org"
2. "google.com"
表示删除通过指定 key 的排序 sets 集合中给定范围积分的成员(通过积分范围删除成员)
ZUNIONSTORE/ZINTERSTORE 操作
表示通过指定的 keys 做交际或者并集,并将结果保存到指定的结果集中
操作 hash 类型的值:
Command Parameters Description
HSET key field value Set the hash field to the specified value. Creates the
hash if needed.
HGET key field Retrieve the value of the specified hash field.
HMGET key field1 ... fieldN Get the hash values associated to the specified
fields.
HMSET key field1 value1 ... fieldN valueN Set the hash fields to their respective
values.
HINCRBY key field integer Increment the integer value of the hash at key on
field with integer.
HEXISTS key field Test for existence of a specified field in a hash
HDEL key field Remove the specified field from a hash
HLEN key Return the number of items in a hash.
HKEYS key Return all the fields in a hash.
HVALS key Return all the values in a hash.
HGETALL key Return all the fields and associated values in a hash.
HSET 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli hset h_uid uid001 'Falcon.C'
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli hset h_uid uid002 'NetSeek'
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli hset h_uid uid003 'LinuxTone'
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli hkeys h_uid
1. "uid001"
IT 运维专家网 http://www.LinuxTone.Org
2. "uid002"
3. "uid003"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli hvals h_uid
1. "Falcon.C"
2. "NetSeek"
3. "LinuxTone"
表示给指定的 hash 字段设置值,如果不存在则创建
HGET 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli hget h_uid uid001
"Falcon.C"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli hget h_uid uid002
"NetSeek"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli hget h_uid uid003
"LinuxTone"
表示获取指定 hash 字段的值
HMGET 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli hmget h_uid uid001 uid002 uid003
1. "Falcon.C"
2. "NetSeek"
3. "LinuxTone"
表示批量获取指定 hash 字段的值
HMSET 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli hmset h_uid uid004 'linuxtone.org' uid005
'qq.com'
OK
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli hkeys h_uid
1. "uid001"
2. "uid002"
3. "uid003"
4. "uid004"
5. "uid005"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli hvals h_uid
1. "Falcon.C"
2. "NetSeek"
3. "LinuxTone"
4. "linuxtone.org"
5. "qq.com"
表示批量设置 hash 字段的值
HINCRBY 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli hincrby h_uid_incr uid 1
IT 运维专家网 http://www.LinuxTone.Org
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli hincrby h_uid_incr uid 1
(integer) 2
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli hincrby h_uid_incr uid 3
(integer) 5
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli hvals h_uid_incr
1. "5"
表示对指定的 hash 字段的值进行递增操作
HEXISTS 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli hexists h_uid uid001
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli hexists h_uid uid0011
(integer) 0
表示判断指定的 hash 字段是否存在
HDEL 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli hset h_uid uid 1
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli hvals h_uid
1. "Falcon.C"
2. "NetSeek"
3. "LinuxTone"
4. "linuxtone.org"
5. "qq.com"
6. "1"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli hdel h_uid uid
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli hvals h_uid
1. "Falcon.C"
2. "NetSeek"
3. "LinuxTone"
4. "linuxtone.org"
5. "qq.com"
表示通过指定的 hash 字段删除 hash 值
HLEN 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli hlen h_uid
(integer) 5
表示返回 hash 长度
LKEYS 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli hkeys h_uid
1. "uid001"
IT 运维专家网 http://www.LinuxTone.Org
2. "uid002"
3. "uid003"
4. "uid004"
5. "uid005"
表示返回指定 hash 的所有 key
HVALS 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli hvals h_uid
1. "Falcon.C"
2. "NetSeek"
3. "LinuxTone"
4. "linuxtone.org"
5. "qq.com"
表示返回指定 hash 的所有 value
HGETALL 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli hgetall h_uid
1. "uid001"
2. "Falcon.C"
3. "uid002"
4. "NetSeek"
5. "uid003"
6. "LinuxTone"
7. "uid004"
8. "linuxtone.org"
9. "uid005"
10. "qq.com"
表示返回指定 hash 的所有字段及关联的值
公共操作命令部分:(不受数据类型的影响)
Command Parameters Description
SORT key BY pattern LIMIT start end GET pattern ASC|DESC ALPHA Sort a
Set or a List accordingly to the specified parameters
数据持久化控制命令
SAVE - Synchronously save the DB on disk
BGSAVE - Asynchronously save the DB on disk
LASTSAVE - Return the UNIX time stamp of the last successfully saving
of the dataset on disk
SHUTDOWN - Synchronously save the DB on disk, then shutdown the
server
BGREWRITEAOF - Rewrite the append only file in background when it gets
too big
IT 运维专家网 http://www.LinuxTone.Org
远程服务器控制命令
INFO - Provide information and statistics about the server
MONITOR - Dump all the received requests in real time
SLAVEOF - Change the replication settings
CONFIG - Configure a Redis server at runtime
Redis 的 的 master/slave 复制 :
Redis 的 master/slave 数据复制方式可以是一主一从或者是一主多从的方式,Redis 在
master 是非阻塞模式,也就是说在 slave 执行数据同步的时候,master 是可以接受客户端的
请求的,并不影响同步数据的一致性,然而在 slave 端是阻塞模式的,slave 在同步 master
数据时,并不能够响应客户端的查询
Redis 的 master/slave模式下,master 提供数据读写服务,而 slave 只提供读服务
Redis的 master/slave 的配置方式是在 slave 主机的 Redis目录下的 redis.conf 配置文件中
添加:
slaveof master_ip master_port
例如:
我们配置我们的 slave 为:redis-slave.conf
daemonize yes
pidfile redis-slave.pid
port 6380
timeout 300
loglevel verbose
logfile stdout
databases 16
save 900 1
save 300 10
save 60 10000
rdbcompression yes
dbfilename dump-slave.rdb
dir /home/falcon/redis-2.0.0/
slaveof 127.0.0.1 6379
appendonly no
appendfsync everysec
vm-enabled no
vm-swap-file logs/redis-slave.swap
vm-max-memory 0
vm-page-size 32
IT 运维专家网 http://www.LinuxTone.Org
vm-pages 134217728
vm-max-threads 4
glueoutputbuf yes
hash-max-zipmap-entries 64
hash-max-zipmap-value 512
activerehashing yes
启动 slave:
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-server redis-slave.conf
查看状态信息:
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli -p 6380 info
redis_version:1.3.17
redis_git_sha1:00000000
redis_git_dirty:0
arch_bits:32
multiplexing_api:epoll
process_id:10772
uptime_in_seconds:249
uptime_in_days:0
connected_clients:2
connected_slaves:0
blocked_clients:0
used_memory:1756868
used_memory_human:1.68M
changes_since_last_save:0
bgsave_in_progress:0
last_save_time:1281654285
bgrewriteaof_in_progress:0
total_connections_received:13
total_commands_processed:9
expired_keys:0
hash_max_zipmap_entries:64
hash_max_zipmap_value:512
pubsub_channels:0
pubsub_patterns:0
vm_enabled:0
role:slave
master_host:127.0.0.1
master_port:6379
master_link_status:up
master_last_io_seconds_ago:248
db0:keys=23,expires=0
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli -p 6379 info
IT 运维专家网 http://www.LinuxTone.Org
redis_version:1.3.17
redis_git_sha1:00000000
redis_git_dirty:0
arch_bits:32
multiplexing_api:epoll
process_id:7663
uptime_in_seconds:16787
uptime_in_days:0
connected_clients:1
connected_slaves:1
blocked_clients:0
used_memory:1757232
used_memory_human:1.68M
changes_since_last_save:0
bgsave_in_progress:0
last_save_time:1281654286
bgrewriteaof_in_progress:0
total_connections_received:835
total_commands_processed:55953
expired_keys:1
hash_max_zipmap_entries:64
hash_max_zipmap_value:512
pubsub_channels:0
pubsub_patterns:0
vm_enabled:0
role:master
db0:keys=23,expires=0
扩展思维:
Redis 可以做一主一从,也可以做一主多从,更可以做一主一从,在从下面挂从,大家
可以根据需求做这样的试验
一、 Redis 介绍
二、 Redis 性能介绍
三、 Redis 功能
四、 Redis 安装及配置
五、 Redis 启动
六、 Redis 的数据类型
七、 Redis 的 master/slave 配置
声明:本文档仅供学习参考之用,如有错误和其他观点,请访问 http://bbs.linuxtone.org 或
Email 本人
Redis 介绍
Redis 本质上一个 Key/Value 数据库,与 Memcached 类似的 NoSQL 型数据库,但是他的
数据可以持久化的保存在磁盘上,解决了服务重启后数据不丢失的问题,他的值可以是 string
(字符串)、list(列表)、sets(集合)或者是 ordered sets(被排序的集合),所有的数据
类型都具有 push/pop、add/remove、执行服务端的并集、交集、两个 sets 集中的差别等等
操作,这些操作都是具有原子性的,Redis 还支持各种不同的排序能力
Redis 2.0 更是增加了很多新特性,如:提升了性能、增加了新的数据类型、更少的利用
内存(AOF 和 VM)
Redis 支持绝大部分主流的开发语言,如:C、Java、C#、PHP、Perl、Python、Lua、Erlang、
Ruby 等等
Redis 性能:
根据 Redis 官方的测试结果:在 50 个并发的情况下请求 10w 次,写的速度是 110000
次/s,读的速度是 81000 次/s
测试环境:
1. 50 个并发,请求 100000 次
2. 读和写大小为 256bytes 的字符串
3. Linux2.6 Xeon X3320 2.5GHz 的服务器上
IT 运维专家网 http://www.LinuxTone.Org
4. 通过本机的 loopback interface 接口上执行
地址:http://code.google.com/p/redis/wiki/Benchmarks
Redis 的功能:
1、Redis 的 Sharding:Redis 支持客户端的 Sharding 功能,通过一致性 hash 算法实现,
当前 Redis 不支持故障冗余,在集群中不能在线增加或删除Redis
2、Redis 的 master/slave 复制:
1. 一个 master 支持多个 slave
2. Slave 可以接受其他 slave 的连接来替代他连接 master
3. 复制在 master 是非阻塞的,而在 slave 是阻塞的
4. 复制被利用来提供可扩展性,在 slave 端只提供查询功能及数据的冗余
3、Redis 的 Virtual Memory 功能:vm 是 Redis2.0 新增的一个非常稳定和可靠的功能,
vm 的引入是为了提高Redis 的性能,也就是把很少使用的 value 保存到 disk,而 key 保存在
内存中。实际上就是如果你有 10w 的 keys 在内存中,而只有仅仅 10%左右的 key 经常使用,
那么 Redis 可以通过开启 VM 尝试将不经常使用的 Value 转换到 disk 上保存
4、Redis 的附加档案(AOF)功能:Redis 通过配置的策略将数据集保存到 aof 中,当
Redis 挂掉后能够通过 aof 恢复到挂掉前的状态
Redis 的安装及配置:
下载 Redis:wget http://redis.googlecode.com/files/redis-2.0.0-rc4.tar.gz
[falcon@www.fwphp.cn ~/src]$ tar xvzf redis-2.0.0-rc4.tar.gz
[falcon@www.fwphp.cn ~/src]$ cd redis-2.0.0-rc4
[falcon@www.fwphp.cn ~/src/redis-2.0.0-rc4]$ make
[falcon@www.fwphp.cn ~/src/redis-2.0.0-rc4]$ mkdir ~/redis-2.0.0
[falcon@www.fwphp.cn ~/src/redis-2.0.0-rc4]$cp redis-server ~/redis-2.0.0
[falcon@www.fwphp.cn ~/src/redis-2.0.0-rc4]$cp redis-benchmark ~/redis-2.0.0
[falcon@www.fwphp.cn ~/src/redis-2.0.0-rc4]$cp redis-cli ~/redis-2.0.0
[falcon@www.fwphp.cn ~/src/redis-2.0.0-rc4]$cp redis.conf ~/redis-2.0.0
[falcon@www.fwphp.cn ~/src/redis-2.0.0-rc4]$ cd ~/redis-2.0.0/
配置 redis.conf 配置文件:
#是否作为守护进程运行
daemonize yes
#配置 pid 的存放路径及文件名,默认为当前路径下
pidfile redis.pid
#Redis 默认监听端口
port 6379
#客户端闲置多少秒后,断开连接
timeout 300
#日志显示级别
loglevel verbose
IT 运维专家网 http://www.LinuxTone.Org
#指定日志输出的文件名,也可指定到标准输出端口
logfile stdout
#设置数据库的数量,默认连接的数据库是 0,可以通过 select N 来连接不同的数据库
databases 16
#保存数据到 disk 的策略
#当有一条 Keys 数据被改变是,900 秒刷新到 disk 一次
save 900 1
#当有 10 条 Keys 数据被改变时,300 秒刷新到 disk 一次
save 300 10
#当有 1w 条 keys 数据被改变时,60 秒刷新到 disk 一次
save 60 10000
#当 dump .rdb 数据库的时候是否压缩数据对象
rdbcompression yes
#dump 数据库的数据保存的文件名
dbfilename dump.rdb
#Redis 的工作目录
dir /home/falcon/redis-2.0.0/
########### Replication #####################
#Redis 的复制配置
# slaveof <masterip> <masterport>
# masterauth <master-password>
############## SECURITY ###########
# requirepass foobared
############### LIMITS ##############
#最大客户端连接数
# maxclients 128
#最大内存使用率
# maxmemory <bytes>
########## APPEND ONLY MODE #########
#是否开启日志功能
appendonly no
# 刷新日志到 disk 的规则
# appendfsync always
appendfsync everysec
# appendfsync no
################ VIRTUAL MEMORY ###########
#是否开启 VM 功能
vm-enabled no
# vm-enabled yes
vm-swap-file logs/redis.swap
vm-max-memory 0
IT 运维专家网 http://www.LinuxTone.Org
vm-page-size 32
vm-pages 134217728
vm-max-threads 4
############# ADVANCED CONFIG ###############
glueoutputbuf yes
hash-max-zipmap-entries 64
hash-max-zipmap-value 512
#是否重置 Hash 表
activerehashing yes
启动 Redis
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-server redis.conf
检测 Redis 是否启动:
[falcon@www.fwphp.cn ~/redis-2.0.0]$ netstat -an -t
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 0.0.0.0:10022 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:6379 0.0.0.0:* LISTEN
……..
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ps -ef|grep redis-server
falcon 7663 1 0 02:29 ? 00:00:00 ./redis-server redis.conf
Redis 的 数据类型 :
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli -h
usage: redis-cli [-h host] [-p port] [-a authpw] [-r repeat_times] [-n db_num] [-i] cmd arg1 arg2
arg3 ... argN
usage: echo "argN" | redis-cli -c [-h host] [-p port] [-a authpw] [-r repeat_times] [-n db_num] cmd
arg1 arg2 ... arg(N-1)
Redis 根据 5 种不同的数据类型来操作数据对象:
操作 String 类型的值:
Command Parameters Description
SET key value Set a key to a string value
GET key Return the string value of the key
GETSET key value Set a key to a string returning the old value of the
key
MGET key1 key2 ... keyN Multi-get, return the strings values of the keys
SETNX key value Set a key to a string value if the key does not exist
SETEX key time value Set+Expire combo command
IT 运维专家网 http://www.LinuxTone.Org
MSET key1 value1 key2 value2 ... keyN valueN Set multiple keys to multiple
values in a single atomic operation
MSETNX key1 value1 key2 value2 ... keyN valueN Set multiple keys to multiple
values in a single atomic operation if none of the keys already exist
INCR key Increment the integer value of key
INCRBY key integer Increment the integer value of key by integer
DECR key Decrement the integer value of key
DECRBY key integer Decrement the integer value of key by integer
APPEND key value Append the specified string to the string stored at
key
SUBSTR key start end Return a substring of a larger string
操作方法:
SET 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli -n 0 set uid_001 Falcon.C
OK
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli -n 0 set uid_002 Falcon
OK
表示向数据库 0 中插入字符串 key 为 uid_001,value 为 Falcon.C 的字符串
GET 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli -n 0 get uid_001
"Falcon.C"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-c
4000
li get uid_001
"Falcon.C"
表示获取数据库为 0,key 为 uid_001 的字符串,因为在不指定数据编号的情况下,默认连
接的是 0 数据库,所以可以省略-n 参数
GETSET 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli getset uid_002 "falcom520@gmail.com"
"Falcon"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli get uid_002
falcom520@gmail.com
表示返回指定 key 的原始值,并指定一个新值给他
MGET 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli mget uid_001 uid_002
1. "Falcon.C"
2. "falcom520@gmail.com"
表示获取多个 key 的值
SETNX 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli setnx uid_001_email "falcom520@126.com"
IT 运维专家网 http://www.LinuxTone.Org
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli get uid_001_email
"falcom520@126.com"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli setnx uid_001_email "falcom520@126.com"
(integer) 0
表示当一个指定的 key 不存在时,设置这个 key 指定的 value,如果存在,则设置不成功
SETEX 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli setex uid_001_msn 5 "falcom520@126.com"
OK
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli get uid_001_msn
"falcom520@126.com"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli get uid_001_msn
(nil)
表示设置一个 key 指定的value 保存 5 秒后失效,设置 key/value 的有效期
MSET 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli mset uid0001 "0001" uid0002 "0002"
uid0003 "0003"
OK
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli mget uid0001 uid0002 uid0003
1. "0001"
2. "0002"
3. "0003"
表示多键值对的数据保存,在保证原子操作性的情况下
MSETNX 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli msetnx uid0003 "0003" uid0004 "0004"
uid0005 "0005"
(integer) 0
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli msetnx uid0004 "0004" uid0005 "0005"
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli mget uid0001 uid0002 uid0003 uid0004
uid0005
1. "0001"
2. "0002"
3. "0003"
4. "0004"
5. "0005"
表示在单原子操作性的情况下,keys 不存在的前提下插入多个 values值,如果存在其中一个
keys 则插入失败
INCR 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli incr uid
IT 运维专家网 http://www.LinuxTone.Org
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli incr uid
(integer) 2
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli incr uid
(integer) 3
表示对给定 key 的 value进行递增的操作
INCRBY 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli incrby uid 5
(integer) 8
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli incrby uid 5
(integer) 13
表示对给定 key 的 value进行指定步长的递增操作
DECR 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli decr uid
(integer) 12
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli decr uid
(integer) 11
表示对给定的 key 的 value 进行递减操作
DECRBY 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli decrby uid 3
(integer) 8
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli decrby uid 3
(integer) 5
表示对给定 key 的 value做指定步长的递减操作
APPEND 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli append content "01234"
(integer) 5
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli get content
"01234"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli append content "56789"
(integer) 10
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli get content
"0123456789"
表示追加一个 value 到指定的 key 中,如果 key 不存在,则新建 key
SUBSTR 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli substr content 0 4
"01234"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli substr content 5 10
"56789"
IT 运维专家网 http://www.LinuxTone.Org
表示返回指定 key 的 value 的部分字符串
作 操作 lists 类型的值:(列表)
Command Parameters Description
RPUSH key value Append an element to the tail of the List value at key
LPUSH key value Append an element to the head of the List value at key
LLEN key Return the length of the List value at key
LRANGE key start end Return a range of elements from the List at key
LTRIM key start end Trim the list at key to the specified range of elements
LINDEX key index Return the element at index position from the List at key
LSET key index value Set a new value as the element at index position of the
List at key
LREM key count value Remove the first-N, last-N, or all the elements matching
value from the List at key
LPOP key Return and remove (atomically) the first element of the
List at key
RPOP key Return and remove (atomically) the last element of the
List at key
BLPOP key1 key2 ... keyN timeout Blocking LPOP
BRPOP key1 key2 ... keyN timeout Blocking RPOP
RPOPLPUSH srckey dstkey Return and remove (atomically) the last element of the
source List stored at srckey and push the same element to the destination List stored at dstkey
RPUSH 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli rpush list_001 0000001
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli rpush list_001 0000002
(integer) 2
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli rpush list_001 0000003
(integer) 3
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli lrange list_001 0 3
1. "0000001"
2. "0000002"
3. "0000003"
表示向指定 key 的 list 的后面(右边)追加指定的 value
LPUSH 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli lpush list_001 000099
(integer) 4
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli lpush list_001 000098
(integer) 5
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli lpush list_001 000097
(integer) 6
IT 运维专家网 http://www.LinuxTone.Org
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli lrange list_001 0 8
1. "000097"
2. "000098"
3. "000099"
4. "0000001"
5. "0000002"
6. "0000003"
表示向指定 key 的 list 的前面(左边)追加指定的 value
LLEN 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli llen list_001
(integer) 6
表示返回指定 key list 的长度
LRANGE 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli lrange list_001 2 4
1. "000099"
2. "0000001"
3. "0000002"
表示返回指定 key list 里面的位置的范围 value
LTRIM 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli ltrim list_001 0 2
OK
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli lrange list_001 0 4
1. "000097"
2. "000098"
3. "000099"
表示删除指定 key 的值范围以外的数据
LINDEX 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli lrange list_001 0 9
1. "000097"
2. "000098"
3. "000099"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli lindex list_001 2
"000099"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli lindex list_001 1
"000098"
表示返回指定 key list 里面索引的值
LSET 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli lrange list_001 0 9
1. "000097"
IT 运维专家网 http://www.LinuxTone.Org
2. "000098"
3. "000099"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli lset list_001 0 "100097"
OK
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli lrange list_001 0 9
1. "100097"
2. "000098"
3. "000099"
表示给指定 key 的 list 里面指定索引的值修改为一个新值
LREM 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli lpush list_001 000099
(integer) 4
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli lpush list_001 000099
(integer) 5
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli lpush list_001 000099
(integer) 6
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli lrange list_001 0 9
1. "000099"
2. "000099"
3. "000099"
4. "100097"
5. "000098"
6. "000099"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli lrem list_001 2 000099
(integer) 2
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli lrange list_001 0 9
1. "000099"
2. "100097"
3. "000098"
4. "000099"
表示删除指定 key 的 list 里面值为 value 的指定个数
LPOP 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli lrange list_001 0 9
1. "000099"
2. "100097"
3. "000098"
4. "000099"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli lpop list_001
"000099"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli lrange list_001 0 9
1. "100097"
2. "000098"
IT 运维专家网 http://www.LinuxTone.Org
3. "000099"
表示删除指定 key 的 list里面最前面(左边)的值,并返回该值
RPOP 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli lrange list_001 0 9
1. "100097"
2. "000098"
3. "000099"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli rpop list_001
"000099"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli lrange list_001 0 9
1. "100097"
2. "000098"
表示删除指定 key 的 list里面最后面(右边)的值,并返回该值
BLPOP 和 BRPOP 操作
在阻塞的模式下执行 LPOP 和 RPOP 操作
RPOPLPUSH 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli lrange list_001 0 9
1. "100097"
2. "000098"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli rpoplpush list_001 list_999
"000098"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli lrange list_001 0 9
1. "100097"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli lrange list_999 0 6
1. "000098"
表示将原 key 的 list 后面(右边)的值删掉,并保存到指定的目的 key 中,并返回该值
操作 sets 类型的值:(sets 集合)
Command Parameters Description
SADD key member Add the specified member to the Set value at key
SREM key member Remove the specified member from the Set value at key
SPOP key Remove and return (pop) a random element from the Set
value at key
SMOVE srckey dstkey member Move the specified member from one Set to another
atomically
SCARD key Return the number of elements (the cardinality) of the Set at
key
SISMEMBER key member Test if the specified value is a member of the Set at key
SINTER key1 key2 ... keyN Return the intersection between the Sets stored at key1,
key2, ..., keyN
IT 运维专家网 http://www.LinuxTone.Org
SINTERSTORE dstkey key1 key2 ... keyN Compute the intersection between the Sets stored at key1,
key2, ..., keyN, and store the resulting Set at dstkey
SUNION key1 key2 ... keyN Return the union between the Sets stored at key1, key2, ...,
keyN
SUNIONSTORE dstkey key1 key2 ... keyN Compute the union between the Sets stored at
key1, key2, ..., keyN, and store the resulting Set at dstkey
SDIFF key1 key2 ... keyN Return the difference between the Set stored at key1 and all
the Sets key2, ..., keyN
SDIFFSTORE dstkey key1 key2 ... keyN Compute the difference between the Set key1
and all the Sets key2, ..., keyN, and store the resulting Set at
dstkey
SMEMBERS key Return all the members of the Set value at key
SRANDMEMBER key Return a random member of the Set value at key
SADD 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli sadd s_001 "Falcon.C"
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli sadd s_001 "Falcon"
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli smembers s_001
1. "Falcon"
2. "Falcon.C"
表示向指定 key 的集合中添加成员
SREM 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli smembers s_001
1. "Falcon"
2. "Falcon.C"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli srem s_001 Falcon
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli smembers s_001
1. "Falcon.C"
表示删除指定 key 的指定Value 成员值
SPOP 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli smembers s_001
1. "Falcon.C"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli sadd s_001 "www.linuxtone.org"
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli sadd s_001 "bbs.linuxtone.org"
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli sadd s_001 "uc.linuxtone.org"
IT 运维专家网 http://www.LinuxTone.Org
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli smembers s_001
1. "www.linuxtone.org"
2. "Falcon.C"
3. "bbs.linuxtone.org"
4. "uc.linuxtone.org"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli spop s_001
"www.linuxtone.org"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli smembers s_001
1. "Falcon.C"
2. "bbs.linuxtone.org"
3. "uc.linuxtone.org"
表示从指定 key 的 set 集中随机删除一个成员 value 并返回
SMOVE 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli smembers s_001
1. "Falcon.C"
2. "bbs.linuxtone.org"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli smove s_001 s_002 bbs.linuxtone.org
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli smembers s_001
1. "Falcon.C"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli smembers s_002
1. "bbs.linuxtone.org"
表示从一个指定的 key 中移动一个指定的 value 成员到另一个指定的key 中,这些操作是具
有原子性的
SCARD 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli scard s_001
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli scard s_002
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli smembers s_001
1. "Falcon.C"
表示返回指定 key 的 set集的 value 成员个数
SISMEMBER 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli smembers s_001
1. "Falcon.C"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli sismember s_001 Falcon
(integer) 0
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli sismember s_001 Falcon.C
(integer) 1
表示判断指定的 key 的成员是否存在于 sets 集中
IT 运维专家网 http://www.LinuxTone.Org
SINTER 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli sadd s_001 "000001"
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli sadd s_001 "000002"
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli smembers s_001
1. "Falcon.C"
2. "000001"
3. "000002"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli smembers s_002
1. "bbs.linuxtone.org"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli sadd s_002 "000001"
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli sadd s_002 "000002"
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli smembers s_002
1. "000001"
2. "bbs.linuxtone.org"
3. "000002"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli sinter s_001 s_002
1. "000001"
2. "000002"
表示对指定的 key 的 sets 集执行交集操作,返回指定 sets 集合中相同的 value 成员
SINTERSTORE 操作
[falcon@www
dc14
.fwphp.cn ~/redis-2.0.0]$ ./redis-cli sadd s_001 "000003"
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli sadd s_001 "00000099"
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli smembers s_001
1. "000003"
2. "Falcon.C"
3. "000001"
4. "000002"
5. "00000099"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli sadd s_002 "000003"
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli sadd s_002 "00000099"
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli smembers s_002
1. "000003"
2. "000001"
3. "bbs.linuxtone.org"
IT 运维专家网 http://www.LinuxTone.Org
4. "000002"
5. "00000099"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli smembers s_002
1. "000003"
2. "000001"
3. "bbs.linuxtone.org"
4. "000002"
5. "00000099"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli sinterstore s_003 s_001 s_002
(integer) 4
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli smembers s_003
1. "000003"
2. "000001"
3. "00000099"
4. "000002"
表示将指定的 key 的 sets 集做交集,并将结果保存到指定的 key 中
SUNION 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli smembers s_001
1. "000003"
2. "Falcon.C"
3. "000001"
4. "000002"
5. "00000099"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli smembers s_002
1. "000003"
2. "bbs.linuxtone.org"
3. "000001"
4. "000002"
5. "00000099"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli sunion s_001 s_002
1. "000003"
2. "Falcon.C"
3. "000001"
4. "bbs.linuxtone.org"
5. "000002"
6. "00000099"
表示对指定的 key 的 sets 集合做并集
SUNIONSTORE 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli smembers s_001
1. "000003"
2. "Falcon.C"
3. "000001"
IT 运维专家网 http://www.LinuxTone.Org
4. "000002"
5. "00000099"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli smembers s_002
1. "000003"
2. "bbs.linuxtone.org"
3. "000001"
4. "000002"
5. "00000099"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli sunionstore s_004 s_001 s_002
(integer) 6
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli smembers s_004
1. "000003"
2. "Falcon.C"
3. "000001"
4. "bbs.linuxtone.org"
5. "000002"
6. "00000099"
表示对指定的 key 的 sets 集做并集,并将结果保存到指定的 key 中
SDIFF 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli smembers s_001
1. "000003"
2. "Falcon.C"
3. "000001"
4. "000002"
5. "00000099"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli smembers s_002
1. "000003"
2. "bbs.linuxtone.org"
3. "000001"
4. "000002"
5. "00000099"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli sdiff s_001 s_002 s_003 s_004
(empty list or set)
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli sdiff s_001 s_002
1. "Falcon.C"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli sdiff s_001 s_003
1. "Falcon.C"
表示对给定的第一个 key的 sets 集合与其他的 key的 sets 集合的 value 进行对比,并返回不
同的 value 的成员
SDIFFSTORE 操作
Sdiffstore 与 sdiff 操作一样,只是把不同的 sets 集合成员保存到一个给定的 key 的 sets 集合
IT 运维专家网 http://www.LinuxTone.Org
中
SMEMBERS 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli smembers s_004
1. "000003"
2. "Falcon.C"
3. "000001"
4. "bbs.linuxtone.org"
5. "000002"
6. "00000099"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli smembers s_003
1. "000003"
2. "000001"
3. "00000099"
4. "000002"
表示返回指定 key 的所有sets 集合的成员
SRANDMEMBER 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli smembers s_003
1. "000003"
2. "000001"
3. "00000099"
4. "000002"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli srandmember s_003
"000001"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli srandmember s_003
"000002"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli srandmember s_003
"000002"
表示返回一个给定 key 的sets 集合中随机的一个成员
操作 zsets 类型的值:(排序后的 sets 集合)
Command Parameters Description
ZADD key score member Add the specified member to the Sorted Set value at key
or update the score if it already exist
ZREM key member Remove the specified member from the Sorted Set value
at key
ZINCRBY key increment member If the member already exists increment its score by
increment, otherwise add the member setting increment
as score
ZRANK key member Return the rank (or index) or member in the sorted set at
key, with scores being ordered from low to high
IT 运维专家网 http://www.LinuxTone.Org
ZREVRANK key member Return the rank (or index) or member in the sorted set at
key, with scores being ordered from high to low
ZRANGE key start end Return a range of elements from the sorted set at key
ZREVRANGE key start end Return a range of elements from the sorted set at key,
exactly like ZRANGE, but the sorted set is ordered in
traversed in reverse order, from the greatest to the
smallest score
ZRANGEBYSCORE key min max Return all the elements with score >= min and score <=
max (a range query) from the sorted set
ZCOUNT key min max Return the number of elements with score >= min and
score <= max in the sorted set
ZCARD key Return the cardinality (number of elements) of the sorted
set at key
ZSCORE key element Return the score associated with the specified element of
the sorted set at key
ZREMRANGEBYRANK key min max Remove all the elements with rank >= min and rank <=
max from the sorted set
ZREMRANGEBYSCORE key min max Remove all the elements with score >= min and score <=
max from the sorted set
ZUNIONSTORE / ZINTERSTORE dstkey N key1 ... keyN WEIGHTS w1 ... wN AGGREGATE
SUM|MIN|MAX Perform a union or intersection over a number of sorted sets with optional
weight and aggregate
ZADD 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zadd z_001 1 "Falcon.C"
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zadd z_001 1 "Falcon"
(integer) 0
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zadd z_001 1 "LinuxTone"
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zrange z_001 0 4
1. "Falcon"
2. "Falcon.C"
3. "LinuxTone"
表示通过给定的积分顺序插入成员值到指定的 key 的顺序 sets 集合中,如果成员存在则插入
失败
ZREM 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zrange z_001 0 4
1. "Falcon"
2. "Falcon.C"
3. "LinuxTone"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zrem z_001 Falcon
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zrange z_001 0 4
IT 运维专家网 http://www.LinuxTone.Org
1. "Falcon.C"
2. "LinuxTone"
表示从给定的 key 的顺序sets 集合中删除指定的成员
ZINCRBY 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zrange z_001 0 4
1. "Falcon.C"
2. "LinuxTone"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zincrby z_001 2 Falcon.C
"3"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zrange z_001 0 8
1. "LinuxTone"
2. "Falcon.C"
表示给指定的 key 的成员的排序积分进行给定的递增值的递增,如果积分为零,则将递增值
作为积分排序
ZRANK 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zrange z_001 0 8
1. "LinuxTone"
2. "0"
3. "Falcon.C"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zrank z_001 Falcon.C
(integer) 2
表示获取当前指定 key 的成员在排序 sets 集合中的排名,从 0 开始计数(正序)
ZREVRANK 操作
与 ZRANK 一样,从 0 开始计数(倒序)
ZRANGE 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zrange z_001 0 8
1. "LinuxTone"
2. "0"
3. "Falcon.C"
表示通过开始值和结束值来获取指定 key 的排序 sets 集合中的成员范围
ZREVRANGE 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zrange z_001 0 2
1. "LinuxTone"
2. "0"
3. "Falcon.C"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zrange z_001 0 1
1. "LinuxTone"
2. "0"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zrevrange z_001 0 1
IT 运维专家网 http://www.LinuxTone.Org
1. "Falcon.C"
2. "0"
表示通过对指定 key 的排序 sets 集合倒序后在获取指定范围的成员集
ZRANGEBYSCORE 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zadd z_001 1 "linuxtone.org"
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zadd z_001 2 "qq.com"
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zadd z_001 3 "google.com"
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zrange z_001 0 10
1. "linuxtone.org"
2. "LinuxTone"
3. "qq.com"
4. "google.com"
5. "0"
6. "Falcon.C"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zrangebyscore z_001 2 4
1. "LinuxTone"
2. "qq.com"
3. "google.com"
表示获取指定 key 的积分范围的排序 sets 集合的成员
ZCOUNT 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zrange z_001 0 10
1. "linuxtone.org"
2. "LinuxTone"
3. "qq.com"
4. "google.com"
5. "0"
6. "Falcon.C"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zcount z_001 2 4
(integer) 3
表示获取指定 key 的积分范围的排序 sets 集合的成员数量
ZCARD 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zrange z_001 0 10
1. "linuxtone.org"
2. "LinuxTone"
3. "qq.com"
4. "google.com"
5. "0"
6. "Falcon.C"
IT 运维专家网 http://www.LinuxTone.Org
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zcard z_001
(integer) 6
表示获取指定 key 的排序sets 集合的成员基数
ZSCORE 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zrange z_001 0 10
1. "linuxtone.org"
2. "LinuxTone"
3. "qq.com"
4. "google.com"
5. "0"
6. "Falcon.C"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zscore z_001 0
"5"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zscore z_001 qq.com
"2"
表示获取指定 key 的排序sets 集合中成员的积分
ZREMRANGEBYRANK 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zrange z_001 0 10
1. "linuxtone.org"
2. "LinuxTone"
3. "qq.com"
4. "google.com"
5. "0"
6. "Falcon.C"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zremrangebyrank z_001 4 5
(integer) 2
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zrange z_001 0 10
1. "linuxtone.org"
2. "LinuxTone"
3. "qq.com"
4. "google.com"
表示删除指定 key 的排序sets 集合中成员的排名范围的成员(通过排名范围删除成员)
ZREMRANGEBYSCORE 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zrange z_001 0 10
1. "linuxtone.org"
2. "LinuxTone"
3. "qq.com"
4. "google.com"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zscore z_001 linuxtone.org
"1"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zscore z_001 LinuxTone
IT 运维专家网 http://www.LinuxTone.Org
"2"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zscore z_001 qq.com
"2"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zscore z_001 google.com
"3"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zremrangebyscore z_001 2 2
(integer) 2
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli zrange z_001 0 10
1. "linuxtone.org"
2. "google.com"
表示删除通过指定 key 的排序 sets 集合中给定范围积分的成员(通过积分范围删除成员)
ZUNIONSTORE/ZINTERSTORE 操作
表示通过指定的 keys 做交际或者并集,并将结果保存到指定的结果集中
操作 hash 类型的值:
Command Parameters Description
HSET key field value Set the hash field to the specified value. Creates the
hash if needed.
HGET key field Retrieve the value of the specified hash field.
HMGET key field1 ... fieldN Get the hash values associated to the specified
fields.
HMSET key field1 value1 ... fieldN valueN Set the hash fields to their respective
values.
HINCRBY key field integer Increment the integer value of the hash at key on
field with integer.
HEXISTS key field Test for existence of a specified field in a hash
HDEL key field Remove the specified field from a hash
HLEN key Return the number of items in a hash.
HKEYS key Return all the fields in a hash.
HVALS key Return all the values in a hash.
HGETALL key Return all the fields and associated values in a hash.
HSET 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli hset h_uid uid001 'Falcon.C'
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli hset h_uid uid002 'NetSeek'
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli hset h_uid uid003 'LinuxTone'
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli hkeys h_uid
1. "uid001"
IT 运维专家网 http://www.LinuxTone.Org
2. "uid002"
3. "uid003"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli hvals h_uid
1. "Falcon.C"
2. "NetSeek"
3. "LinuxTone"
表示给指定的 hash 字段设置值,如果不存在则创建
HGET 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli hget h_uid uid001
"Falcon.C"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli hget h_uid uid002
"NetSeek"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli hget h_uid uid003
"LinuxTone"
表示获取指定 hash 字段的值
HMGET 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli hmget h_uid uid001 uid002 uid003
1. "Falcon.C"
2. "NetSeek"
3. "LinuxTone"
表示批量获取指定 hash 字段的值
HMSET 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli hmset h_uid uid004 'linuxtone.org' uid005
'qq.com'
OK
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli hkeys h_uid
1. "uid001"
2. "uid002"
3. "uid003"
4. "uid004"
5. "uid005"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli hvals h_uid
1. "Falcon.C"
2. "NetSeek"
3. "LinuxTone"
4. "linuxtone.org"
5. "qq.com"
表示批量设置 hash 字段的值
HINCRBY 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli hincrby h_uid_incr uid 1
IT 运维专家网 http://www.LinuxTone.Org
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli hincrby h_uid_incr uid 1
(integer) 2
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli hincrby h_uid_incr uid 3
(integer) 5
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli hvals h_uid_incr
1. "5"
表示对指定的 hash 字段的值进行递增操作
HEXISTS 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli hexists h_uid uid001
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli hexists h_uid uid0011
(integer) 0
表示判断指定的 hash 字段是否存在
HDEL 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli hset h_uid uid 1
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli hvals h_uid
1. "Falcon.C"
2. "NetSeek"
3. "LinuxTone"
4. "linuxtone.org"
5. "qq.com"
6. "1"
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli hdel h_uid uid
(integer) 1
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli hvals h_uid
1. "Falcon.C"
2. "NetSeek"
3. "LinuxTone"
4. "linuxtone.org"
5. "qq.com"
表示通过指定的 hash 字段删除 hash 值
HLEN 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli hlen h_uid
(integer) 5
表示返回 hash 长度
LKEYS 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli hkeys h_uid
1. "uid001"
IT 运维专家网 http://www.LinuxTone.Org
2. "uid002"
3. "uid003"
4. "uid004"
5. "uid005"
表示返回指定 hash 的所有 key
HVALS 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli hvals h_uid
1. "Falcon.C"
2. "NetSeek"
3. "LinuxTone"
4. "linuxtone.org"
5. "qq.com"
表示返回指定 hash 的所有 value
HGETALL 操作
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli hgetall h_uid
1. "uid001"
2. "Falcon.C"
3. "uid002"
4. "NetSeek"
5. "uid003"
6. "LinuxTone"
7. "uid004"
8. "linuxtone.org"
9. "uid005"
10. "qq.com"
表示返回指定 hash 的所有字段及关联的值
公共操作命令部分:(不受数据类型的影响)
Command Parameters Description
SORT key BY pattern LIMIT start end GET pattern ASC|DESC ALPHA Sort a
Set or a List accordingly to the specified parameters
数据持久化控制命令
SAVE - Synchronously save the DB on disk
BGSAVE - Asynchronously save the DB on disk
LASTSAVE - Return the UNIX time stamp of the last successfully saving
of the dataset on disk
SHUTDOWN - Synchronously save the DB on disk, then shutdown the
server
BGREWRITEAOF - Rewrite the append only file in background when it gets
too big
IT 运维专家网 http://www.LinuxTone.Org
远程服务器控制命令
INFO - Provide information and statistics about the server
MONITOR - Dump all the received requests in real time
SLAVEOF - Change the replication settings
CONFIG - Configure a Redis server at runtime
Redis 的 的 master/slave 复制 :
Redis 的 master/slave 数据复制方式可以是一主一从或者是一主多从的方式,Redis 在
master 是非阻塞模式,也就是说在 slave 执行数据同步的时候,master 是可以接受客户端的
请求的,并不影响同步数据的一致性,然而在 slave 端是阻塞模式的,slave 在同步 master
数据时,并不能够响应客户端的查询
Redis 的 master/slave模式下,master 提供数据读写服务,而 slave 只提供读服务
Redis的 master/slave 的配置方式是在 slave 主机的 Redis目录下的 redis.conf 配置文件中
添加:
slaveof master_ip master_port
例如:
我们配置我们的 slave 为:redis-slave.conf
daemonize yes
pidfile redis-slave.pid
port 6380
timeout 300
loglevel verbose
logfile stdout
databases 16
save 900 1
save 300 10
save 60 10000
rdbcompression yes
dbfilename dump-slave.rdb
dir /home/falcon/redis-2.0.0/
slaveof 127.0.0.1 6379
appendonly no
appendfsync everysec
vm-enabled no
vm-swap-file logs/redis-slave.swap
vm-max-memory 0
vm-page-size 32
IT 运维专家网 http://www.LinuxTone.Org
vm-pages 134217728
vm-max-threads 4
glueoutputbuf yes
hash-max-zipmap-entries 64
hash-max-zipmap-value 512
activerehashing yes
启动 slave:
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-server redis-slave.conf
查看状态信息:
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli -p 6380 info
redis_version:1.3.17
redis_git_sha1:00000000
redis_git_dirty:0
arch_bits:32
multiplexing_api:epoll
process_id:10772
uptime_in_seconds:249
uptime_in_days:0
connected_clients:2
connected_slaves:0
blocked_clients:0
used_memory:1756868
used_memory_human:1.68M
changes_since_last_save:0
bgsave_in_progress:0
last_save_time:1281654285
bgrewriteaof_in_progress:0
total_connections_received:13
total_commands_processed:9
expired_keys:0
hash_max_zipmap_entries:64
hash_max_zipmap_value:512
pubsub_channels:0
pubsub_patterns:0
vm_enabled:0
role:slave
master_host:127.0.0.1
master_port:6379
master_link_status:up
master_last_io_seconds_ago:248
db0:keys=23,expires=0
[falcon@www.fwphp.cn ~/redis-2.0.0]$ ./redis-cli -p 6379 info
IT 运维专家网 http://www.LinuxTone.Org
redis_version:1.3.17
redis_git_sha1:00000000
redis_git_dirty:0
arch_bits:32
multiplexing_api:epoll
process_id:7663
uptime_in_seconds:16787
uptime_in_days:0
connected_clients:1
connected_slaves:1
blocked_clients:0
used_memory:1757232
used_memory_human:1.68M
changes_since_last_save:0
bgsave_in_progress:0
last_save_time:1281654286
bgrewriteaof_in_progress:0
total_connections_received:835
total_commands_processed:55953
expired_keys:1
hash_max_zipmap_entries:64
hash_max_zipmap_value:512
pubsub_channels:0
pubsub_patterns:0
vm_enabled:0
role:master
db0:keys=23,expires=0
扩展思维:
Redis 可以做一主一从,也可以做一主多从,更可以做一主一从,在从下面挂从,大家
可以根据需求做这样的试验
相关文章推荐
- 【Redis】Redis的基本安装及使用、Jedis的基本使用、spring-data-redis的集成、主从模式、哨兵模式
- Redis安装与基本使用
- windows下redis可视化客户端redisClient的安装及基本使用
- windows下redis可视化客户端redisClient的安装及基本使用
- windows下redis可视化客户端redisClient的安装及基本使用
- Laravel 5.1中 Redis 的安装配置及基本使用教程
- windows下redis可视化客户端redisClient的安装及基本使用
- windows下redis可视化客户端redisClient的安装及基本使用
- windows下redis可视化客户端redisClient的安装及基本使用
- windows下redis可视化客户端redisClient的安装及基本使用
- Laravel 5.1中 Redis 的安装配置及基本使用教程
- Redis安装和基本使用
- Redis 安装以及基本使用
- windows下redis可视化客户端redisClient的安装及基本使用
- Redis学习笔记(一) Redis安装与基本使用(windows)
- Windows下Redis的安装和基本使用
- Redis下载安装与基本使用(linux)
- Redis安装及Jedis常用基本数据类型使用(一)
- windows下redis可视化客户端redisClient的安装及基本使用
- windows下redis可视化客户端redisClient的安装及基本使用