IP地址、网关、子网掩码快速切换批处理(windows bat)

::关闭回显
@echo off
title IP快速切换脚本
::
:: -------- 只需要将下面变量替换成需要的地址即可 ---------
set net_interface=本地连接
::办公网段
set ip1=95.16.1.100
set mask1=255.255.0.0
set gateway1=95.16.1.1
::测试网段
set ip2=95.16.2.1
set mask2=255.255.0.0
set gateway2=95.16.2.1
::dns
set dns1=80.32.1.1
set dns2=84.32.2.2
:: -------------------------------------------------------
:CHOICE
color a
cls
echo *****************IP快速切换脚本***********************
echo ----【IP设置功能】---------------【系统功能】-----
echo -----1.修改为办公网段-------------r.重启网卡------
echo -----2.修改为测试网段-------------s.重启计算机----
echo -----3.修改为自动获取-------------x.退出程序------
echo.
echo -----仅对名称为"%net_interface%"的网卡进行设置----
echo *******************By TangTao*************************
:mu
set /p choice= 请输入：
IF NOT "%choice%"=="" SET choice=%choice:~0,1%
if /i "%choice%"=="1" goto ip1
if /i "%choice%"=="2" goto ip2
if /i "%choice%"=="3" goto dhcp
if /i "%choice%"=="r" goto reboot
if /i "%choice%"=="s" goto shutdown
if /i "%choice%"=="x" goto END
echo.
echo.
echo 输入的选择不正确，请重新输入！
echo.
echo.
GOTO CHOICE
::设置办公IP
:ip1
echo.
echo  -----------办公IP-----------
echo       ip:	%ip1%
echo     mask:	%mask1%
echo gateway1:	%gateway1%
echo     dns1:	%dns1%
echo     dns2:	%dns2%
::同时设置ip、mask、gateway，不要分别设置
cmd /c netsh interface ip set address "%net_interface%" source=static addr=%ip1% mask=%mask1% gateway=%gateway1%
::设置dns
cmd /c netsh interface ip set dnsservers "%net_interface%" static %dns1%
cmd /c netsh interface ip add dnsservers "%net_interface%" %dns2% index=2
ipconfig /flushdns
echo 设置完成
pause | echo 按任意键返回选择菜单
GOTO CHOICE
::设置测试IP
:ip2
echo.
echo  -----------测试IP-----------
echo       ip:	%ip2%
echo     mask:	%mask2%
echo gateway1:	%gateway2%
echo     dns1:	%dns1%
echo     dns2:	%dns2%
::同时设置ip、mask、gateway，不要分别设置
cmd /c netsh interface ip set address "%net_interface%" source=static addr=%ip2% mask=%mask1% gateway=%gateway2%
::设置dns
cmd /c netsh interface ip set dns "%net_interface%" static %dns1%
cmd /c netsh interface ip add dns "%net_interface%" %dns2% index=2
ipconfig /flushdns
echo 设置完成
pause | echo 按任意键返回选择菜单
GOTO CHOICE
::设置dhcp
:dhcp
echo.
echo  ---设置ip/dns为自动获取---
cmd /c netsh interface ip set address name="%net_interface%" source=dhcp
cmd /c netsh interface ip set dns "%net_interface%" source=dhcp
echo 设置完成
pause | echo 按任意键返回选择菜单
GOTO CHOICE
:reboot
::设置reboot
cmd /c netsh interface set interface "%net_interface%" disabled
cmd /c netsh interface set interface "%net_interface%" enable
echo 重启网卡完成
pause | echo 按任意键返回选择菜单
GOTO CHOICE
:shutdown
shutdown /r /f /t 30
:END
Exit