芯片上电休眠或者JTAG禁用后怎么下载程序
2017-03-13 17:25
861 查看
—STM32器件,keil环境,一不小心上电就进入了待机模式,没法正常步骤下载程序了,怎么办?
—解决办法:按住芯片复位键不放,点击下载程序,编译环境会刷提示信息,此时快速释放复位键,一般即可下载成功。简而言之,按住复位键,点击下载程序,择机释放复位键。
Firmware: J-Link ARM V8 compiled Jul 17 2014 12:31:18
Hardware: V8.00
S/N : 286370559
Feature(s) : RDI,FlashDL,FlashBP,JFlash
JLink Info: Found SWD-DP with ID 0x2BA01477
JLink Info: TPIU fitted.
JLink Info: ETM fitted.
JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
JLink Info: Found Cortex-M3 r2p0, Little endian.
ROMTableAddr = 0xE00FF003
**JLink Warning: S_RESET_ST not cleared
**JLink Warning: CPU did not halt after reset.
**JLink Warning: CPU could not be halted
JLink Info: Core did not halt after reset, trying to disable WDT.
**JLink Warning: CPU did not halt after reset.
**JLink Warning: CPU could not be halted
**JLink Warning: S_RESET_ST not cleared
JLink Info: Found SWD-DP with ID 0x2BA01477
JLink Info: TPIU fitted.
JLink Info: ETM fitted.
JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
JLink Info: Found Cortex-M3 r2p0, Little endian.
**JLink Warning: S_RESET_ST not cleared
**JLink Warning: CPU did not halt after reset.
**JLink Warning: CPU could not be halted
JLink Info: Core did not halt after reset, trying to disable WDT.
**JLink Warning: CPU did not halt after reset.
**JLink Warning: CPU could not be halted
**JLink Warning: S_RESET_ST not cleared
**JLink Warning: CPU could not be halted
Error: Flash Download failed - Target DLL has been cancelled
—解决办法:按住芯片复位键不放,点击下载程序,编译环境会刷提示信息,此时快速释放复位键,一般即可下载成功。简而言之,按住复位键,点击下载程序,择机释放复位键。
JLink info:
DLL: V4.66 , compiled Mar 11 2013 11:00:46Firmware: J-Link ARM V8 compiled Jul 17 2014 12:31:18
Hardware: V8.00
S/N : 286370559
Feature(s) : RDI,FlashDL,FlashBP,JFlash
JLink Info: Found SWD-DP with ID 0x2BA01477
JLink Info: TPIU fitted.
JLink Info: ETM fitted.
JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
JLink Info: Found Cortex-M3 r2p0, Little endian.
ROMTableAddr = 0xE00FF003
**JLink Warning: S_RESET_ST not cleared
**JLink Warning: CPU did not halt after reset.
**JLink Warning: CPU could not be halted
JLink Info: Core did not halt after reset, trying to disable WDT.
**JLink Warning: CPU did not halt after reset.
**JLink Warning: CPU could not be halted
**JLink Warning: S_RESET_ST not cleared
JLink Info: Found SWD-DP with ID 0x2BA01477
JLink Info: TPIU fitted.
JLink Info: ETM fitted.
JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
JLink Info: Found Cortex-M3 r2p0, Little endian.
**JLink Warning: S_RESET_ST not cleared
**JLink Warning: CPU did not halt after reset.
**JLink Warning: CPU could not be halted
JLink Info: Core did not halt after reset, trying to disable WDT.
**JLink Warning: CPU did not halt after reset.
**JLink Warning: CPU could not be halted
**JLink Warning: S_RESET_ST not cleared
**JLink Warning: CPU could not be halted
Error: Flash Download failed - Target DLL has been cancelled
相关文章推荐
- STM32 禁用swd-jtag下载口后,重新下载程序的方法
- JLINK和ADS1.2配合调试下载程序,及JTAG不能识别CPU核解决办法
- 在Quartus II中使用JTAG模式固化程序到EPCS中的方法==掌握这个方法后就可以在做PCB时候只留一个JTAG下载口即可。
- 图解单片机下载程序电路原理之USB转串口线、CH340、PL2303、MAX232芯片的使用!
- 图解单片机下载程序电路原理之USB转串口线、CH340、PL2303、MAX232芯片的使用! .
- keil 通过JTAG下载程序 报错:error: flash download failed - "cortex-m3"的解决方法
- 网上下载的程序无法打开怎么办?
- win7旗舰版怎么删除或者禁用一个用户
- 【91xcz】Win7/Win8下载程序完成后不弹出提示框怎么办
- svchost.exe程序下载解决方法或者在360中看到svchost.exe占网速
- linux下使用quartus下载程序显示 Error (209053): Unexpected error in JTAG server -- error code 89
- 发现用JTAG下载程序到EPCS比用AS方式下载速度快
- ASP.NET中怎么能同时下载多个文件或者一个文件夹?
- “44B0芯片不支持用JLINK下载程序” 到底是不是真的?
- 图解Stm32使用jlink下载程序时jtag接口(SW和JTAG模式)的简化方法!
- JTAG下载出现:Can't access JTAG chain 怎么办
- 当数据库中字段设计为smalint或者tinyint后,程序中要求字段为枚举型,应该怎么设置
- 转载]Cyclone II JTAG ASP 配置下载程序
- 如何解决使用keil下载或者调试程序是提示的“Invalid ROM Table”信息!
- STM32在程序中禁用JTAG功能后不能进行仿真的解决办法