rac下查看scanip 在哪个节点上

rac下查看scanip 在哪个节点上

以前都是ifconfig -a 查看scanip 在哪里

节点1

[grid@rac1 ~]$ ifconfig -a
eth0      Link encap:Ethernet  HWaddr 08:00:27:4B:F3:55
inet addr:192.168.56.6  Bcast:192.168.56.255  Mask:255.255.255.0
inet6 addr: fe80::a00:27ff:fe4b:f355/64 Scope:Link
UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
RX packets:3149 errors:0 dropped:0 overruns:0 frame:0
TX packets:784 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:327019 (319.3 KiB)  TX bytes:117064 (114.3 KiB)

eth0:1    Link encap:Ethernet  HWaddr 08:00:27:4B:F3:55
inet addr:192.168.56.10  Bcast:192.168.56.255  Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1

eth0:2    Link encap:Ethernet  HWaddr 08:00:27:4B:F3:55
inet addr:192.168.56.8  Bcast:192.168.56.255  Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1

eth1      Link encap:Ethernet  HWaddr 08:00:27:0A:99:F7
inet addr:10.0.0.6  Bcast:10.0.0.255  Mask:255.255.255.0
inet6 addr: fe80::a00:27ff:fe0a:99f7/64 Scope:Link
UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
RX packets:257899 errors:0 dropped:0 overruns:0 frame:0
TX packets:266726 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:128636811 (122.6 MiB)  TX bytes:150546538 (143.5 MiB)

eth1:1    Link encap:Ethernet  HWaddr 08:00:27:0A:99:F7
inet addr:169.254.70.67  Bcast:169.254.255.255  Mask:255.255.0.0
UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1

lo        Link encap:Local Loopback
inet addr:127.0.0.1  Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING  MTU:16436  Metric:1
RX packets:97647 errors:0 dropped:0 overruns:0 frame:0
TX packets:97647 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:32577742 (31.0 MiB)  TX bytes:32577742 (31.0 MiB)

节点2

[grid@rac2 ~]$ ifconfig -a
eth0      Link encap:Ethernet  HWaddr 08:00:27:1C:82:FA
inet addr:192.168.56.7  Bcast:192.168.56.255  Mask:255.255.255.0
inet6 addr: fe80::a00:27ff:fe1c:82fa/64 Scope:Link
UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
RX packets:3660 errors:0 dropped:0 overruns:0 frame:0
TX packets:1383 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:357807 (349.4 KiB)  TX bytes:269820 (263.4 KiB)

eth0:1    Link encap:Ethernet  HWaddr 08:00:27:1C:82:FA
inet addr:192.168.56.9  Bcast:192.168.56.255  Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1

eth1      Link encap:Ethernet  HWaddr 08:00:27:3F:C0:53
inet addr:10.0.0.7  Bcast:10.0.0.255  Mask:255.255.255.0
inet6 addr: fe80::a00:27ff:fe3f:c053/64 Scope:Link
UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
RX packets:267574 errors:0 dropped:0 overruns:0 frame:0
TX packets:254342 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:150132646 (143.1 MiB)  TX bytes:127209443 (121.3 MiB)

eth1:1    Link encap:Ethernet  HWaddr 08:00:27:3F:C0:53
inet addr:169.254.225.24  Bcast:169.254.255.255  Mask:255.255.0.0
UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1

lo        Link encap:Local Loopback
inet addr:127.0.0.1  Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING  MTU:16436  Metric:1
RX packets:56815 errors:0 dropped:0 overruns:0 frame:0
TX packets:56815 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:20499835 (19.5 MiB)  TX bytes:20499835 (19.5 MiB)

在这种情况下你需要查询多个节点（如果你有的话，上例中有2个节点，而且我恰巧第一次查到了所要的）

下面这种方法能够快速核实scanip在哪个节点上。

任选一个节点

节点2

[grid@rac2 ~]$ srvctl status scan
SCAN VIP scan1 is enabled
SCAN VIP scan1 is running on node rac1

如上说明scan在节点1上。