tableview的多个类型自定义cell的数据重用解决方案
2016-12-22 00:00
218 查看
UITableView继承自UIScrollview,是苹果为我们封装好的一个基于scroll的控件。上面主要是一个个的UITableViewCell,可以让UITableViewCell响应一些点击事件,也可以在UITableViewCell中加入UITextField或者UITextView等子视图,使得可以在cell上进行文字编辑。
UITableView中的cell可以有很多,一般会通过重用cell来达到节省内存的目的:通过为每个cell指定一个重用标识符(reuseIdentifier),即指定了单元格的种类,当cell滚出屏幕时,会将滚出屏幕的单元格放入重用的queue中,当某个未在屏幕上的单元格要显示的时候,就从这个queue中取出单元格进行重用。
但对于多变的自定义cell,有时这种重用机制会出错。比如,当一个cell含有一个UITextField的子类并被放在重用queue中以待重用,这时如果一个未包含任何子视图的cell要显示在屏幕上,就会取出并使用这个重用的cell显示在无任何子视图的cell中,这时候就会出错。
解决方法:
方法1 将获得cell的方法从- (UITableViewCell*)dequeueReusableCellWithIdentifier:(NSString*)identifier 换为-(UITableViewCell *)cellForRowAtIndexPath:(NSIndexPath *)indexPath
重用机制调用的就是dequeueReusableCellWithIdentifier这个方法,方法的意思就是“出列可重用的cell”,因而只要将它换为cellForRowAtIndexPath(只从要更新的cell的那一行取出cell),就可以不使用重用机制,因而问题就可以得到解决,虽然可能会浪费一些空间。
示例代码:
[plain]
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
{
static NSString *CellIdentifier = @"Cell";
// UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier]; //改为以下的方法
UITableViewCell *cell = [tableView cellForRowAtIndexPath:indexPath]; //根据indexPath准确地取出一行,而不是从cell重用队列中取出
if (cell == nil) {
cell = [[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:CellIdentifier];
}
//...其他代码
}
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
{
static NSString *CellIdentifier = @"Cell";
// UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier]; //改为以下的方法
UITableViewCell *cell = [tableView cellForRowAtIndexPath:indexPath]; //根据indexPath准确地取出一行,而不是从cell重用队列中取出
if (cell == nil) {
cell = [[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:CellIdentifier];
}
//...其他代码
}
方法2 通过为每个cell指定不同的重用标识符(reuseIdentifier)来解决。
重用机制是根据相同的标识符来重用cell的,标识符不同的cell不能彼此重用。于是我们将每个cell的标识符都设置为不同,就可以避免不同cell重用的问题了。
示例代码:
[plain]
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
{
NSString *CellIdentifier = [NSString stringWithFormat:@"Cell%d%d", [indexPath section], [indexPath row]];//以indexPath来唯一确定cell
UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier]; //出列可重用的cell
if (cell == nil) {
cell = [[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:CellIdentifier];
}
//...其他代码
}
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
{
NSString *CellIdentifier = [NSString stringWithFormat:@"Cell%d%d", [indexPath section], [indexPath row]];//以indexPath来唯一确定cell
UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier]; //出列可重用的cell
if (cell == nil) {
cell = [[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:CellIdentifier];
}
//...其他代码
}
方法3 删除重用cell的所有子视图
这个方法是通过删除重用的cell的所有子视图,从而得到一个没有特殊格式的cell,供其他cell重用。
示例代码:
[plain]
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
{
static NSString *CellIdentifier = @"Cell";
UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier]; //出列可重用的cell
if (cell == nil) {
cell = [[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:CellIdentifier];
}
else
{
//删除cell的所有子视图
while ([cell.contentView.subviews lastObject] != nil)
{
[(UIView*)[cell.contentView.subviews lastObject] removeFromSuperview];
}
}
//...其他代码
}
UITableView中的cell可以有很多,一般会通过重用cell来达到节省内存的目的:通过为每个cell指定一个重用标识符(reuseIdentifier),即指定了单元格的种类,当cell滚出屏幕时,会将滚出屏幕的单元格放入重用的queue中,当某个未在屏幕上的单元格要显示的时候,就从这个queue中取出单元格进行重用。
但对于多变的自定义cell,有时这种重用机制会出错。比如,当一个cell含有一个UITextField的子类并被放在重用queue中以待重用,这时如果一个未包含任何子视图的cell要显示在屏幕上,就会取出并使用这个重用的cell显示在无任何子视图的cell中,这时候就会出错。
解决方法:
方法1 将获得cell的方法从- (UITableViewCell*)dequeueReusableCellWithIdentifier:(NSString*)identifier 换为-(UITableViewCell *)cellForRowAtIndexPath:(NSIndexPath *)indexPath
重用机制调用的就是dequeueReusableCellWithIdentifier这个方法,方法的意思就是“出列可重用的cell”,因而只要将它换为cellForRowAtIndexPath(只从要更新的cell的那一行取出cell),就可以不使用重用机制,因而问题就可以得到解决,虽然可能会浪费一些空间。
示例代码:
[plain]
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
{
static NSString *CellIdentifier = @"Cell";
// UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier]; //改为以下的方法
UITableViewCell *cell = [tableView cellForRowAtIndexPath:indexPath]; //根据indexPath准确地取出一行,而不是从cell重用队列中取出
if (cell == nil) {
cell = [[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:CellIdentifier];
}
//...其他代码
}
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
{
static NSString *CellIdentifier = @"Cell";
// UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier]; //改为以下的方法
UITableViewCell *cell = [tableView cellForRowAtIndexPath:indexPath]; //根据indexPath准确地取出一行,而不是从cell重用队列中取出
if (cell == nil) {
cell = [[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:CellIdentifier];
}
//...其他代码
}
方法2 通过为每个cell指定不同的重用标识符(reuseIdentifier)来解决。
重用机制是根据相同的标识符来重用cell的,标识符不同的cell不能彼此重用。于是我们将每个cell的标识符都设置为不同,就可以避免不同cell重用的问题了。
示例代码:
[plain]
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
{
NSString *CellIdentifier = [NSString stringWithFormat:@"Cell%d%d", [indexPath section], [indexPath row]];//以indexPath来唯一确定cell
UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier]; //出列可重用的cell
if (cell == nil) {
cell = [[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:CellIdentifier];
}
//...其他代码
}
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
{
NSString *CellIdentifier = [NSString stringWithFormat:@"Cell%d%d", [indexPath section], [indexPath row]];//以indexPath来唯一确定cell
UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier]; //出列可重用的cell
if (cell == nil) {
cell = [[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:CellIdentifier];
}
//...其他代码
}
方法3 删除重用cell的所有子视图
这个方法是通过删除重用的cell的所有子视图,从而得到一个没有特殊格式的cell,供其他cell重用。
示例代码:
[plain]
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
{
static NSString *CellIdentifier = @"Cell";
UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier]; //出列可重用的cell
if (cell == nil) {
cell = [[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:CellIdentifier];
}
else
{
//删除cell的所有子视图
while ([cell.contentView.subviews lastObject] != nil)
{
[(UIView*)[cell.contentView.subviews lastObject] removeFromSuperview];
}
}
//...其他代码
}
相关文章推荐
- Swift3.0 自定义tableView复用cell 的写法,与CollectionViewCell的不同,数据model
- tableView自定义cell与api数据展示纪录(也是MVC的例子)
- plain类型的tableView如何不显示多余的空cell
- ViewState和用户自定义数据类型
- ios tableView那些事 (十五)用故事模式自定义cell
- 使用storyboard显示UITableView时,如果不修改系统默认生成的tableView:cellForRowAtIndexPath:方法中的代码,则必须为UITableViewCell注册(填写)重用标识符:identifier.必须要代码方法中的标识符一致.
- 自定义tableview,数据不完整问题
- ios tableView那些事 (十六) UITableView中Cell重用机制导致内容重复解决方法
- (iphone/ipad)关于uitableview自定义cell与重用机制探究(由于文章写的太好,直接转帖备用)
- SDK 6.0 TableView Cell重用
- ios tableView那些事 (十六) UITableView中Cell重用机制导致内容重复解决方法
- 根据用户在tableview中点击(触摸)cell的自定义accessoryButton获得其indexpath
- tableView重用cell原理
- <原>在一个tableView上应用不同类型的DTAttributedTextCell
- ios tableView那些事 (十六) UITableView中Cell重用机制导致内容重复解决方法
- ios中自定义table view cell
- TableView中实现自定义cell
- UITableView cell自定义视图中插入Table实现复杂界面
- ios中Tableview的两个获得重用cell方法的区别?(兼容iPhone5.0之前的版本)