poj 1273 Drainage Ditches
2016-12-19 17:29
393 查看
Drainage Ditches
Time Limit: 1000MS Memory Limit: 10000K
Total Submissions: 71807 Accepted: 27942
Description
Every time it rains on Farmer John’s fields, a pond forms over Bessie’s favorite clover patch. This means that the clover is covered by water for awhile and takes quite a long time to regrow. Thus, Farmer John has built a set of drainage ditches so that Bessie’s clover patch is never covered in water. Instead, the water is drained to a nearby stream. Being an ace engineer, Farmer John has also installed regulators at the beginning of each ditch, so he can control at what rate water flows into that ditch.
Farmer John knows not only how many gallons of water each ditch can transport per minute but also the exact layout of the ditches, which feed out of the pond and into each other and stream in a potentially complex network.
Given all this information, determine the maximum rate at which water can be transported out of the pond and into the stream. For any given ditch, water flows in only one direction, but there might be a way that water can flow in a circle.
Input
The input includes several cases. For each case, the first line contains two space-separated integers, N (0 <= N <= 200) and M (2 <= M <= 200). N is the number of ditches that Farmer John has dug. M is the number of intersections points for those ditches. Intersection 1 is the pond. Intersection point M is the stream. Each of the following N lines contains three integers, Si, Ei, and Ci. Si and Ei (1 <= Si, Ei <= M) designate the intersections between which this ditch flows. Water will flow through this ditch from Si to Ei. Ci (0 <= Ci <= 10,000,000) is the maximum rate at which water will flow through the ditch.
Output
For each case, output a single integer, the maximum rate at which water may emptied from the pond.
Sample Input
5 4
1 2 40
1 4 20
2 4 20
2 3 30
3 4 10
Sample Output
50
【分析】
虽然退役了但是还是要学一些东西的…
dinic算法求网络流最大流
具体讲解:点击这里
【代码】
Time Limit: 1000MS Memory Limit: 10000K
Total Submissions: 71807 Accepted: 27942
Description
Every time it rains on Farmer John’s fields, a pond forms over Bessie’s favorite clover patch. This means that the clover is covered by water for awhile and takes quite a long time to regrow. Thus, Farmer John has built a set of drainage ditches so that Bessie’s clover patch is never covered in water. Instead, the water is drained to a nearby stream. Being an ace engineer, Farmer John has also installed regulators at the beginning of each ditch, so he can control at what rate water flows into that ditch.
Farmer John knows not only how many gallons of water each ditch can transport per minute but also the exact layout of the ditches, which feed out of the pond and into each other and stream in a potentially complex network.
Given all this information, determine the maximum rate at which water can be transported out of the pond and into the stream. For any given ditch, water flows in only one direction, but there might be a way that water can flow in a circle.
Input
The input includes several cases. For each case, the first line contains two space-separated integers, N (0 <= N <= 200) and M (2 <= M <= 200). N is the number of ditches that Farmer John has dug. M is the number of intersections points for those ditches. Intersection 1 is the pond. Intersection point M is the stream. Each of the following N lines contains three integers, Si, Ei, and Ci. Si and Ei (1 <= Si, Ei <= M) designate the intersections between which this ditch flows. Water will flow through this ditch from Si to Ei. Ci (0 <= Ci <= 10,000,000) is the maximum rate at which water will flow through the ditch.
Output
For each case, output a single integer, the maximum rate at which water may emptied from the pond.
Sample Input
5 4
1 2 40
1 4 20
2 4 20
2 3 30
3 4 10
Sample Output
50
【分析】
虽然退役了但是还是要学一些东西的…
dinic算法求网络流最大流
具体讲解:点击这里
【代码】
//poj 1273 Drainage Ditches #include<iostream> #include<cstring> #include<cstdio> #include<queue> #define fo(i,j,k) for(i=j;i<=k;i++) #define M(a) memset(a,0,sizeof a) using namespace std; const int mxn=255; queue <int> q; int N,M,ans,S,T; int tab[mxn][mxn]; //残量 int dis[mxn]; //和源点的距离 inline bool bfs() { int i,j; memset(dis,-1,sizeof dis); dis[S]=0; q.push(S); while(!q.empty()) { int u=q.front(),v; q.pop(); fo(v,1,N) if(tab[u][v]>0 && dis[v]<0) dis[v]=dis[u]+1,q.push(v); } if(dis[T]>0) return 1; return 0; } inline int find(int u,int low) { int i,j,a,v; if(u==T) return low; fo(v,1,N) if(tab[u][v]>0 && dis[v]==dis[u]+1 && (a=find(v,min(low,tab[u][v])))) { tab[u][v]-=a; tab[v][u]+=a; return a; } return 0; } int main() { int i,j,f,t,flow,tans; while(scanf("%d%d",&M,&N)!=EOF) { M(tab); S=1,T=N; fo(i,1,M) { scanf("%d%d%d",&f,&t,&flow); tab[f][t]+=flow; } ans=0; while(bfs()) while(tans=find(1,0x7f7f7f7f)) ans+=tans; printf("%d\n",ans); } return 0; } /* 6 7 1 3 2 1 2 1 2 4 1 3 4 2 3 5 1 4 6 2 5 6 1 */
相关文章推荐
- poj 1273 Drainage Ditches | hdoj 1532
- 【poj 1273】Drainage Ditches 最大流dinic模板
- poj 1273最大流dinic算法模板
- isap算法模板poj 1273gap+弧优化 最大流
- POJ-1273
- poj 1273 && hdu 1532 Drainage Ditches (网络最大流)
- poj 1273 Drainage Ditches(网络流入门之最大流)
- POJ 1273 Drainage Ditches
- POJ---1273 Drainage Ditches【最大流】
- POJ1273(Drainage Ditches)
- POJ-1273-Drainage Ditches
- POJ 1273 最大流 Dinic
- POJ 1273 Drainage Ditches
- poj 1273
- poj 1273 Drainage Ditches
- poj 1273 Drainage Ditches
- poj 1273
- POJ 1273 Drainage Ditches 网络流 ISAP
- POJ 1273 Drainage Ditches
- poj-1273 Drainage Ditches 最大流