VirtualBox 下USB 设备加载的步骤及无法加载的解决办法
2016-11-16 10:26
411 查看
1. 将u盘插入电脑,在windows能够识别后,进入VirtualBox的选定要加载的虚拟机,选择设置——》选择usb设备项
2. 选择右边的第一或者是第二个图标,增加一个新的筛选器,第一个图标是增加一个空的筛选器,能够加载任何的usb设备。第二图标是加载host中usb列表的设备。
3. 增加筛选器后,通过windows的安全删除硬件方式卸载usb。
4. 启动 guest,进入ubuntu,此时应该会提示windows发现了virtual box usb驱动,指定驱动为virtual box安装目录C:/Program Files/Oracle/VirtualBox/drivers/USB/device下,然后进行安装。
5. 在启动完毕后,在保证guest系统选中的情况下,插入u盘,如果是第一次使用,在虚拟机的菜单的设备——》分配usb设备中,选择要加载的usb,然后虚拟机的右下角的usb图标会闪动,如果设置正确,ubuntu上就出现你的u盘的图标,然后就可以访问了。
注意:
1. 如果在设置后,然后选择了指定的usb设备后,无法在ubuntu中加载成功,并且再次选中是会弹出提示框,提示:USB device '<unknown>' with UUID {82ab2689-6d62-4878-be58-b97207388811} is busy with a previous request. Please try again later.
返回代码:
E_INVALIDARG (0x80070057)
组件:
HostUSBDevice
界面:
IHostUSBDevice {173b4b44-d268-4334-a00d-b6521c9a740a}
被召者:
IConsole {d5a1cbda-f5d7-4824-9afe-d640c94c7dcf}
这个问题我折腾了很久,一直无法解决,后来在oracle的论坛上看到一个回复,说他那也是同样的问题,后来把AMD usb filterdriver去除了就ok了,按他的方法去除了这个驱动,就能够正常加载了。
在另外一台电脑上也同样出现相同的问题,经过检查,上面安装了moto的手机驱动程序,只要把该驱动去除,就能够正常的加载usb设备了。
如果在设置那增加了过滤器后,没有提示发现virtualbox usb设备的话,很可能与这有关系,或者是你安装了其他的驱动,屏蔽了usb驱动,让virtualbox无法捕捉到usb的东西,所以就无法正确让guest使用usb。
Linux 下 VirtualBox 虚拟机 USB 设备的使用方法
http://www.zzzke.org.cn/H/wd/10024109/02e74f10e0327ad868d138f2b4fdd6f0.html
一个关于虚拟机的很好的网站:
http://www.vmbest.com/school/2-virtualbox-school
以上内容摘抄至:http://blog.csdn.net/lynxzong/article/details/6078089
以下内容摘抄至:http://hi.baidu.com/scolar/item/a232058c3ffdec874514cf5d
于是看AMD的文档,找到手工卸载的方法。
Installing and Uninstalling the Driver
These instructions explain how to install/uninstall the USB filter driver:
Note: For driver installation, you must log in as administrator or have administrator rights for your domain login.
The driver can be installed either by running the CIM installer or by right clicking the inf file and selecting install.
1. Install/Uninstall Using INF File
To install
1. Right-click on the usbfilter.inf file, and then select Install.
2. When installation is complete, reboot the computer.
Note: Using the above installation method will cause the Device Manger to show Usbfilter.sys to be unsigned. This is Device Manger issue and the driver is WHQL signed. If the driver is not WHQL signed, Windows will give a warning while installing the driver.
To uninstall
1. Open the registry and scroll down to:
HKLM\System\CCS\Control\Class\{36FC9E60-C465-11CF-8056-444553540000}
2. Remove usbfilter from UpperFilter.
3. Open the HKLM\System\CCS\Services registry and delete the usbfilter key.
4. Delete usbfilter.sys from:
\%system32%\drivers
5. Reboot the computer.
貌似只有AMD USB Filter Driver支持这种卸载方式,也只有这个有虚拟机问题。
2. 选择右边的第一或者是第二个图标,增加一个新的筛选器,第一个图标是增加一个空的筛选器,能够加载任何的usb设备。第二图标是加载host中usb列表的设备。
3. 增加筛选器后,通过windows的安全删除硬件方式卸载usb。
4. 启动 guest,进入ubuntu,此时应该会提示windows发现了virtual box usb驱动,指定驱动为virtual box安装目录C:/Program Files/Oracle/VirtualBox/drivers/USB/device下,然后进行安装。
5. 在启动完毕后,在保证guest系统选中的情况下,插入u盘,如果是第一次使用,在虚拟机的菜单的设备——》分配usb设备中,选择要加载的usb,然后虚拟机的右下角的usb图标会闪动,如果设置正确,ubuntu上就出现你的u盘的图标,然后就可以访问了。
注意:
1. 如果在设置后,然后选择了指定的usb设备后,无法在ubuntu中加载成功,并且再次选中是会弹出提示框,提示:USB device '<unknown>' with UUID {82ab2689-6d62-4878-be58-b97207388811} is busy with a previous request. Please try again later.
返回代码:
E_INVALIDARG (0x80070057)
组件:
HostUSBDevice
界面:
IHostUSBDevice {173b4b44-d268-4334-a00d-b6521c9a740a}
被召者:
IConsole {d5a1cbda-f5d7-4824-9afe-d640c94c7dcf}
这个问题我折腾了很久,一直无法解决,后来在oracle的论坛上看到一个回复,说他那也是同样的问题,后来把AMD usb filterdriver去除了就ok了,按他的方法去除了这个驱动,就能够正常加载了。
在另外一台电脑上也同样出现相同的问题,经过检查,上面安装了moto的手机驱动程序,只要把该驱动去除,就能够正常的加载usb设备了。
如果在设置那增加了过滤器后,没有提示发现virtualbox usb设备的话,很可能与这有关系,或者是你安装了其他的驱动,屏蔽了usb驱动,让virtualbox无法捕捉到usb的东西,所以就无法正确让guest使用usb。
Linux 下 VirtualBox 虚拟机 USB 设备的使用方法
http://www.zzzke.org.cn/H/wd/10024109/02e74f10e0327ad868d138f2b4fdd6f0.html
一个关于虚拟机的很好的网站:
http://www.vmbest.com/school/2-virtualbox-school
以上内容摘抄至:http://blog.csdn.net/lynxzong/article/details/6078089
以下内容摘抄至:http://hi.baidu.com/scolar/item/a232058c3ffdec874514cf5d
手工卸载AMD USB Filter Driver驱动
win7x64里Catalyst Install Manager竟然说我什么驱动都没装。于是看AMD的文档,找到手工卸载的方法。
Installing and Uninstalling the Driver
These instructions explain how to install/uninstall the USB filter driver:
Note: For driver installation, you must log in as administrator or have administrator rights for your domain login.
The driver can be installed either by running the CIM installer or by right clicking the inf file and selecting install.
1. Install/Uninstall Using INF File
To install
1. Right-click on the usbfilter.inf file, and then select Install.
2. When installation is complete, reboot the computer.
Note: Using the above installation method will cause the Device Manger to show Usbfilter.sys to be unsigned. This is Device Manger issue and the driver is WHQL signed. If the driver is not WHQL signed, Windows will give a warning while installing the driver.
To uninstall
1. Open the registry and scroll down to:
HKLM\System\CCS\Control\Class\{36FC9E60-C465-11CF-8056-444553540000}
2. Remove usbfilter from UpperFilter.
3. Open the HKLM\System\CCS\Services registry and delete the usbfilter key.
4. Delete usbfilter.sys from:
\%system32%\drivers
5. Reboot the computer.
貌似只有AMD USB Filter Driver支持这种卸载方式,也只有这个有虚拟机问题。
相关文章推荐
- VirtualBox 下USB 设备加载的步骤及无法加载的解决办法
- VirtualBox 下USB 设备加载的步骤及无法加载的解决办法
- Mac OS X 10.10.5 中 VirtualBox 5.0 里的 Win7 虚拟机无法使用 USB 3.0 设备的解决办法
- Virtualbox 无法加载usb解决办法
- UBUNTU下virtualBox无法识别usb设备解决办法,亲测(转)
- VIRTUALBOX无法加载USB移动设备的解决方法
- Mac OS X 10.10.5 中 VirtualBox 5.0 里的 Win7 虚拟机无法使用 USB 3.0 设备的解决办法(补充说明)
- 插鼠标出现 usb设备无法识别 解决办法
- iphone4s连接电脑无法识别iphone设备:Apple Mobile Device USB Driver驱动安装失败显示黄色叹号解决办法
- VMware 中无法正常使用USB设备问题的解决办法
- cmd运行Java的步骤以及出现找不到或无法加载主类的时的解决办法
- openSUSE系统下VirtualBox无法挂载主机USB设备问题的解决
- 【转】注册表问题导致usb设备或光驱无法使用的解决办法
- VISTA下USB设备无法正常安装的解决办法
- Jlink V8无法识别的USB设备解决办法 (转载)----可用
- macOS High Sierra 10.13.1安装VMware Fusion 10.0.1 虚拟机无法使用USB设备解决办法
- cmd运行记事本所编java的步骤,以及找不到或无法加载主类的解决办法
- Jlink V8无法识别的USB设备解决办法 (转载) 亲测,可用
- 在linux中的virtualbox无法挂载usb设备的解决方法
- 无法停止USB设备通用卷的解决办法