brocade 300交换机密码忘记重置
2016-11-15 09:23
721 查看
博科300的默认用户名是admin,默认密码是password。由于这台机器用户做过设置,密码改过了需要重设一下。博科交换机是没有reset按钮的,必须通过console线连接通过命令重置。
博科300的os是用的linux 2.6的核心,最高权限的管理帐号是root。重置交换机密码就是用这个帐号。
brocade300 login: root
Password: fibranne
使用该帐号登陆后会出现下面的信息:
Disclaimer for Root and Factory Accounts Usage!
This Fibre Channel switch is equipped with Root and Factory accounts
that are intended for diagnostics and debugging purposes solely by
the Equipment vendor's trained engineers. Improper use of the
functionality made available through the Root or Factory account could
cause significant harm and disruption to the operation of the SAN fabric.
Your use of the functionality made available through the Root or Factory
account is at your sole risk and you assume all liability resulting from
such use. The Equipment vendor shall have no liability for any losses
or damages arising from or relating to the use of the Root or Factory
account (and the functionality enabled thereby) by anyone other than
the Equipment vendor's authorized engineers.
Proceeding with the usage of this switch as the Root or Factory user
explicitly indicates your agreement to the terms of this disclaimer.
Please change passwords for switch default accounts now.
Use Control-C to exit or press 'Enter' key to proceed.
这里用Control-C结束就行了,如果回车会让分别设置各个帐号的密码,出现如下信息:
Warning: Access to the Root and Factory accounts may be required for
proper support of the switch. Please ensure the Root and Factory
passwords are documented in a secure location. Recovery of a lost Root
or Factory password will result in fabric downtime.
for user - root
Changing password for root
Enter new password:
Password unchanged.
passwd: Authentication token manipulation error
Please change passwords for switch default accounts now.
for user - factory
Changing password for factory
Enter new password:
Password unchanged.
passwd: Authentication token manipulation error
Please change passwords for switch default accounts now.
for user - admin
Changing password for admin
Enter new password:
Password unchanged.
passwd: Authentication token manipulation error
Please change passwords for switch default accounts now.
for user - user
Changing password for user
Enter new password:
Password unchanged.
passwd: Authentication token manipulation error
登陆后是用passwddefault命令恢复出厂密码
brocade300:root> passwddefault
Password policies are already set to default.
All account passwords have been successfully set to factory default.
brocade300:root>
交换机查看状态:switchShow
交换机管理IP: ipAddrShow
修改交换机IP管理端口: ipAddrSet
交换机license相关命令
查看交换机当前激活的license信息:licenseShow
查看交换机 licenseID 或 WWN:licenseIdShow
激活交换机license :licenseAdd
SW300:admin> licenseadd b9QQGGHJHARRdF
adding license-key b9QQGGHJHARRdF
保存交换机配置信息: configUpload
博科交换机 戴尔服务器
博科300的os是用的linux 2.6的核心,最高权限的管理帐号是root。重置交换机密码就是用这个帐号。
brocade300 login: root
Password: fibranne
使用该帐号登陆后会出现下面的信息:
Disclaimer for Root and Factory Accounts Usage!
This Fibre Channel switch is equipped with Root and Factory accounts
that are intended for diagnostics and debugging purposes solely by
the Equipment vendor's trained engineers. Improper use of the
functionality made available through the Root or Factory account could
cause significant harm and disruption to the operation of the SAN fabric.
Your use of the functionality made available through the Root or Factory
account is at your sole risk and you assume all liability resulting from
such use. The Equipment vendor shall have no liability for any losses
or damages arising from or relating to the use of the Root or Factory
account (and the functionality enabled thereby) by anyone other than
the Equipment vendor's authorized engineers.
Proceeding with the usage of this switch as the Root or Factory user
explicitly indicates your agreement to the terms of this disclaimer.
Please change passwords for switch default accounts now.
Use Control-C to exit or press 'Enter' key to proceed.
这里用Control-C结束就行了,如果回车会让分别设置各个帐号的密码,出现如下信息:
Warning: Access to the Root and Factory accounts may be required for
proper support of the switch. Please ensure the Root and Factory
passwords are documented in a secure location. Recovery of a lost Root
or Factory password will result in fabric downtime.
for user - root
Changing password for root
Enter new password:
Password unchanged.
passwd: Authentication token manipulation error
Please change passwords for switch default accounts now.
for user - factory
Changing password for factory
Enter new password:
Password unchanged.
passwd: Authentication token manipulation error
Please change passwords for switch default accounts now.
for user - admin
Changing password for admin
Enter new password:
Password unchanged.
passwd: Authentication token manipulation error
Please change passwords for switch default accounts now.
for user - user
Changing password for user
Enter new password:
Password unchanged.
passwd: Authentication token manipulation error
登陆后是用passwddefault命令恢复出厂密码
brocade300:root> passwddefault
Password policies are already set to default.
All account passwords have been successfully set to factory default.
brocade300:root>
交换机查看状态:switchShow
交换机管理IP: ipAddrShow
修改交换机IP管理端口: ipAddrSet
交换机license相关命令
查看交换机当前激活的license信息:licenseShow
查看交换机 licenseID 或 WWN:licenseIdShow
激活交换机license :licenseAdd
SW300:admin> licenseadd b9QQGGHJHARRdF
adding license-key b9QQGGHJHARRdF
保存交换机配置信息: configUpload
博科交换机 戴尔服务器
DELL服务器
相关文章推荐
- brocade 300密码忘记重置
- MYSQL忘记root密码重置方法
- Oracle忘记密码如何重置
- mysql忘记密码怎么重置
- MySQL 5.7 忘记密码 重置密码 my.ini示例
- cisco 交换机密码重置
- 忘记mysql数据库root用户密码重置方法[图文]
- mysql忘记密码的重置方法
- Mac下忘记Mysql root密码重置
- 红帽(RHEL)Linux 忘记root密码后重置密码
- wamp5 忘记mysql root密码 重置方法
- MAC环境下 MYSQL忘记root密码后重置密码(转)
- Linux系统root用户忘记密码的重置方法
- mysql忘记root密码如何重置
- PHPCMS V9后台密码忘记重置工具
- centos6.9下mysql忘记密码后,绕过密码重置方案(重置实测)
- 忘记密码?在Ubuntu下快速重置密码 [zt]
- CentOS 忘记root密码(重置root密码)
- MySql 5.7.13 for Mac 密码重置教程(适合忘记密码)
- 忘记MySQL root密码如何重置。