使用mach-smdk6410.c制作内核刷入显示乱码解决方法
2016-08-11 22:29
399 查看
static struct map_desc smdk6410_iodesc[] = {
{
// LCD support
.virtual = (unsigned long)S3C_VA_LCD,
.pfn = __phys_to_pfn(S3C_PA_FB),
.length = SZ_16K,
.type = MT_DEVICE,
},
};
增加此函数的内容就可解决乱码问题。
完整修改好的文件如下：
/* linux/arch/arm/mach-s3c64xx/mach-smdk6410.c
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/input.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/i2c.h>
#include <linux/leds.h>
#include <linux/fb.h>
#include <linux/gpio.h>
#include <linux/delay.h>
#include <linux/smsc911x.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <linux/pwm_backlight.h>
#ifdef CONFIG_SMDK6410_WM1190_EV1
#include <linux/mfd/wm8350/core.h>
#include <linux/mfd/wm8350/pmic.h>
#endif
#ifdef CONFIG_SMDK6410_WM1192_EV1
#include <linux/mfd/wm831x/core.h>
#include <linux/mfd/wm831x/pdata.h>
#endif
#include <video/platform_lcd.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <mach/hardware.h>
#include <mach/regs-fb.h>
#include <mach/map.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <plat/regs-serial.h>
#include <mach/regs-modem.h>
#include <mach/regs-gpio.h>
#include <mach/regs-sys.h>
#include <mach/regs-srom.h>
#include <plat/ata.h>
#include <plat/iic.h>
#include <plat/fb.h>
#include <plat/gpio-cfg.h>
#include <mach/s3c6410.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/adc.h>
#include <plat/ts.h>
#include <plat/keypad.h>
#include <mach/ts.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <plat/nand.h>
#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
// add by acanoe first
extern void s3c64xx_reserve_bootmem(void); //add by acanoe
struct mtd_partition ok6410_nand_part[] = {
{
.name = "Bootloader",
.offset
= 0,
.size = (2 * SZ_1M),
.mask_flags
= MTD_CAP_NANDFLASH,
},
{
.name = "Kernel",
.offset
= (2 * SZ_1M),
.size = (5*SZ_1M) ,
.mask_flags
= MTD_CAP_NANDFLASH,
},
{
.name = "User",
.offset
= (7 * SZ_1M),
.size = (200*SZ_1M) ,
},
{
.name = "File System",
.offset
= MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
}
};
static struct s3c2410_nand_set ok6410_nand_sets[] = {
[0] = {
.name = "nand",
.nr_chips = 1,
.nr_partitions = ARRAY_SIZE(ok6410_nand_part),
.partitions = ok6410_nand_part,
},
};
static struct s3c2410_platform_nand ok6410_nand_info = {
.tacls = 25,
.twrph0 = 55,
.twrph1 = 40,
.nr_sets = ARRAY_SIZE(ok6410_nand_sets),
.sets = ok6410_nand_sets,
};
//add by acanoe first
static
124b8
struct s3c2410_uartcfg smdk6410_uartcfgs[] __initdata = {
[0] = {
.hwport
= 0,
.flags
= 0,
.ucon = UCON,
.ulcon
= ULCON,
.ufcon
= UFCON,
},
[1] = {
.hwport
= 1,
.flags
= 0,
.ucon = UCON,
.ulcon
= ULCON,
.ufcon
= UFCON,
},
[2] = {
.hwport
= 2,
.flags
= 0,
.ucon = UCON,
.ulcon
= ULCON,
.ufcon
= UFCON,
},
[3] = {
.hwport
= 3,
.flags
= 0,
.ucon = UCON,
.ulcon
= ULCON,
.ufcon
= UFCON,
},
};
/* framebuffer and LCD setup. */
/* GPF15 = LCD backlight control
* GPF13 => Panel power
* GPN5 = LCD nRESET signal
* PWM_TOUT1 => backlight brightness
*/
static void smdk6410_lcd_power_set(struct plat_lcd_data *pd,
unsigned int power)
{
if (power) {
gpio_direction_output(S3C64XX_GPF(13), 1);
/* fire nRESET on power up */
gpio_direction_output(S3C64XX_GPN(5), 0);
msleep(10);
gpio_direction_output(S3C64XX_GPN(5), 1);
msleep(1);
} else {
gpio_direction_output(S3C64XX_GPF(13), 0);
}
}
static struct plat_lcd_data smdk6410_lcd_power_data = {
.set_power
= smdk6410_lcd_power_set,
};
static struct platform_device smdk6410_lcd_powerdev = {
.name = "platform-lcd",
.dev.parent
= &s3c_device_fb.dev,
.dev.platform_data
= &smdk6410_lcd_power_data,
};
static struct s3c_fb_pd_win smdk6410_fb_win0 = {
/* this is to ensure we use win0 */
.win_mode
= {
.left_margin
= 8,
.right_margin
= 13,
.upper_margin
= 7,
.lower_margin
= 5,
.hsync_len
= 3,
.vsync_len
= 1,
.xres = 800,
.yres = 480,
},
.max_bpp
= 32,
.default_bpp
= 16,
.virtual_y
= 480 * 2,
.virtual_x
= 800,
};
/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
static struct s3c_fb_platdata smdk6410_lcd_pdata __initdata = {
.setup_gpio
= s3c64xx_fb_gpio_setup_24bpp,
.win[0]
= &smdk6410_fb_win0,
.vidcon0
= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
.vidcon1
= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
};
/*
* Configuring Ethernet on SMDK6410
*
* Both CS8900A and LAN9115 chips share one chip select mediated by CFG6.
* The constant address below corresponds to nCS1
*
* 1) Set CFGB2 p3 ON others off, no other CFGB selects "ethernet"
* 2) CFG6 needs to be switched to "LAN9115" side
*/
static struct resource smdk6410_smsc911x_resources[] = {
[0] = {
.start = S3C64XX_PA_XM0CSN1,
.end = S3C64XX_PA_XM0CSN1 + SZ_64K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = S3C_EINT(10),
.end = S3C_EINT(10),
.flags = IORESOURCE_IRQ | IRQ_TYPE_LEVEL_LOW,
},
};
static struct smsc911x_platform_config smdk6410_smsc911x_pdata = {
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
.irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
.flags = SMSC911X_USE_32BIT | SMSC911X_FORCE_INTERNAL_PHY,
.phy_interface = PHY_INTERFACE_MODE_MII,
};
static struct platform_device smdk6410_smsc911x = {
.name = "smsc911x",
.id = -1,
.num_resources = ARRAY_SIZE(smdk6410_smsc911x_resources),
.resource = &smdk6410_smsc911x_resources[0],
.dev = {
.platform_data = &smdk6410_smsc911x_pdata,
},
};
#ifdef CONFIG_REGULATOR
static struct regulator_consumer_supply smdk6410_b_pwr_5v_consumers[] = {
{
/* WM8580 */
.supply = "PVDD",
.dev_name = "0-001b",
},
{
/* WM8580 */
.supply = "AVDD",
.dev_name = "0-001b",
},
};
static struct regulator_init_data smdk6410_b_pwr_5v_data = {
.constraints = {
.always_on = 1,
},
.num_consumer_supplies = ARRAY_SIZE(smdk6410_b_pwr_5v_consumers),
.consumer_supplies = smdk6410_b_pwr_5v_consumers,
};
static struct fixed_voltage_config smdk6410_b_pwr_5v_pdata = {
.supply_name = "B_PWR_5V",
.microvolts = 5000000,
.init_data = &smdk6410_b_pwr_5v_data,
.gpio = -EINVAL,
};
static struct platform_device smdk6410_b_pwr_5v = {
.name = "reg-fixed-voltage",
.id = -1,
.dev = {
.platform_data = &smdk6410_b_pwr_5v_pdata,
},
};
#endif
static struct s3c_ide_platdata smdk6410_ide_pdata __initdata = {
.setup_gpio
= s3c64xx_ide_setup_gpio,
};
static uint32_t smdk6410_keymap[] __initdata = {
/* KEY(row, col, keycode) */
KEY(0, 3, KEY_1), KEY(0, 4, KEY_2), KEY(0, 5, KEY_3),
KEY(0, 6, KEY_4), KEY(0, 7, KEY_5),
KEY(1, 3, KEY_A), KEY(1, 4, KEY_B), KEY(1, 5, KEY_C),
KEY(1, 6, KEY_D), KEY(1, 7, KEY_E)
};
static struct matrix_keymap_data smdk6410_keymap_data __initdata = {
.keymap
= smdk6410_keymap,
.keymap_size
= ARRAY_SIZE(smdk6410_keymap),
};
static struct samsung_keypad_platdata smdk6410_keypad_data __initdata = {
.keymap_data
= &smdk6410_keymap_data,
.rows = 2,
.cols = 8,
};
static int smdk6410_backlight_init(struct device *dev)
{
int ret;
ret = gpio_request(S3C64XX_GPF(15), "Backlight");
if (ret) {
printk(KERN_ERR "failed to request GPF for PWM-OUT1\n");
return ret;
}
/* Configure GPIO pin with S3C64XX_GPF15_PWM_TOUT1 */
s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_SFN(2));
return 0;
}
static void smdk6410_backlight_exit(struct device *dev)
{
s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_OUTPUT);
gpio_free(S3C64XX_GPF(15));
}
static struct platform_pwm_backlight_data smdk6410_backlight_data = {
.pwm_id
= 1,
.max_brightness
= 255,
.dft_brightness
= 255,
.pwm_period_ns
= 78770,
.init = smdk6410_backlight_init,
.exit = smdk6410_backlight_exit,
};
static struct platform_device smdk6410_backlight_device = {
.name = "pwm-backlight",
.dev = {
.parent
= &s3c_device_timer[1].dev,
.platform_data
= &smdk6410_backlight_data,
},
};
static struct map_desc smdk6410_iodesc[] = {
{
// LCD support
.virtual = (unsigned long)S3C_VA_LCD,
.pfn = __phys_to_pfn(S3C_PA_FB),
.length = SZ_16K,
.type = MT_DEVICE,
},
};
static struct platform_device *smdk6410_devices[] __initdata = {
//#ifdef CONFIG_SMDK6410_SD_CH0 //Canceled by acanoe
&s3c_device_hsmmc0,
//#endif //Canceled by acanoe
//#ifdef CONFIG_SMDK6410_SD_CH1 //Canceled by acanoe
&s3c_device_hsmmc1,
//#endif //Canceled by acanoe
&s3c_device_i2c0,
// &s3c_device_i2c1,
//Canceled by acanoe
&s3c_device_fb,
&s3c_device_ohci,
&s3c_device_usb_hsotg,
// &s3c64xx_device_iisv4,
//Canceled by acanoe
// &samsung_device_keypad,
//Canceled by acanoe
// add by acanoe 2
&s3c_device_nand,
#ifdef CONFIG_DM9000
// &s3c_device_dm9000,
#endif
// add by acanoe 2
#ifdef CONFIG_REGULATOR
&smdk6410_b_pwr_5v,
#endif
&smdk6410_lcd_powerdev,
// &smdk6410_smsc911x,
// Canceled by acanoe
&s3c_device_adc,
// &s3c_device_cfcon,
// Canceled by acanoe
&s3c_device_rtc,
// &s3c_device_ts,
// Canceled by acanoe
// &s3c_device_wdt,
};
#ifdef CONFIG_REGULATOR
/* ARM core */
static struct regulator_consumer_supply smdk6410_vddarm_consumers[] = {
{
.supply = "vddarm",
}
};
/* VDDARM, BUCK1 on J5 */
static struct regulator_init_data smdk6410_vddarm = {
.constraints = {
.name = "PVDD_ARM",
.min_uV = 1000000,
.max_uV = 1300000,
.always_on = 1,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
},
.num_consumer_supplies = ARRAY_SIZE(smdk6410_vddarm_consumers),
.consumer_supplies = smdk6410_vddarm_consumers,
};
/* VDD_INT, BUCK2 on J5 */
static struct regulator_init_data smdk6410_vddint = {
.constraints = {
.name = "PVDD_INT",
.min_uV = 1000000,
.max_uV = 1200000,
.always_on = 1,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
},
};
/* VDD_HI, LDO3 on J5 */
static struct regulator_init_data smdk6410_vddhi = {
.constraints = {
.name = "PVDD_HI",
.always_on = 1,
},
};
/* VDD_PLL, LDO2 on J5 */
static struct regulator_init_data smdk6410_vddpll = {
.constraints = {
.name = "PVDD_PLL",
.always_on = 1,
},
};
/* VDD_UH_MMC, LDO5 on J5 */
static struct regulator_init_data smdk6410_vdduh_mmc = {
.constraints = {
.name = "PVDD_UH+PVDD_MMC",
.always_on = 1,
},
};
/* VCCM3BT, LDO8 on J5 */
static struct regulator_init_data smdk6410_vccmc3bt = {
.constraints = {
.name = "PVCCM3BT",
.always_on = 1,
},
};
/* VCCM2MTV, LDO11 on J5 */
static struct regulator_init_data smdk6410_vccm2mtv = {
.constraints = {
.name = "PVCCM2MTV",
.always_on = 1,
},
};
/* VDD_LCD, LDO12 on J5 */
static struct regulator_init_data smdk6410_vddlcd = {
.constraints = {
.name = "PVDD_LCD",
.always_on = 1,
},
};
/* VDD_OTGI, LDO9 on J5 */
static struct regulator_init_data smdk6410_vddotgi = {
.constraints = {
.name = "PVDD_OTGI",
.always_on = 1,
},
};
/* VDD_OTG, LDO14 on J5 */
static struct regulator_init_data smdk6410_vddotg = {
.constraints = {
.name = "PVDD_OTG",
.always_on = 1,
},
};
/* VDD_ALIVE, LDO15 on J5 */
static struct regulator_init_data smdk6410_vddalive = {
.constraints = {
.name = "PVDD_ALIVE",
.always_on = 1,
},
};
/* VDD_AUDIO, VLDO_AUDIO on J5 */
static struct regulator_init_data smdk6410_vddaudio = {
.constraints = {
.name = "PVDD_AUDIO",
.always_on = 1,
},
};
#endif
#ifdef CONFIG_SMDK6410_WM1190_EV1
/* S3C64xx internal logic & PLL */
static struct regulator_init_data wm8350_dcdc1_data = {
.constraints = {
.name = "PVDD_INT+PVDD_PLL",
.min_uV = 1200000,
.max_uV = 1200000,
.always_on = 1,
.apply_uV = 1,
},
};
/* Memory */
static struct regulator_init_data wm8350_dcdc3_data = {
.constraints = {
.name = "PVDD_MEM",
.min_uV = 1800000,
.max_uV = 1800000,
.always_on = 1,
.state_mem = {
.uV = 1800000,
.mode = REGULATOR_MODE_NORMAL,
.enabled = 1,
},
.initial_state = PM_SUSPEND_MEM,
},
};
/* USB, EXT, PCM, ADC/DAC, USB, MMC */
static struct regulator_consumer_supply wm8350_dcdc4_consumers[] = {
{
/* WM8580 */
.supply = "DVDD",
.dev_name = "0-001b",
},
};
static struct regulator_init_data wm8350_dcdc4_data = {
.constraints = {
.name = "PVDD_HI+PVDD_EXT+PVDD_SYS+PVCCM2MTV",
.min_uV = 3000000,
.max_uV = 3000000,
.always_on = 1,
},
.num_consumer_supplies = ARRAY_SIZE(wm8350_dcdc4_consumers),
.consumer_supplies = wm8350_dcdc4_consumers,
};
/* OTGi/1190-EV1 HPVDD & AVDD */
static struct regulator_init_data wm8350_ldo4_data = {
.constraints = {
.name = "PVDD_OTGI+HPVDD+AVDD",
.min_uV = 1200000,
.max_uV = 1200000,
.apply_uV = 1,
.always_on = 1,
},
};
static struct {
int regulator;
struct regulator_init_data *initdata;
} wm1190_regulators[] = {
{ WM8350_DCDC_1, &wm8350_dcdc1_data },
{ WM8350_DCDC_3, &wm8350_dcdc3_data },
{ WM8350_DCDC_4, &wm8350_dcdc4_data },
{ WM8350_DCDC_6, &smdk6410_vddarm },
{ WM8350_LDO_1, &smdk6410_vddalive },
{ WM8350_LDO_2, &smdk6410_vddotg },
{ WM8350_LDO_3, &smdk6410_vddlcd },
{ WM8350_LDO_4, &wm8350_ldo4_data },
};
static int __init smdk6410_wm8350_init(struct wm8350 *wm8350)
{
int i;
/* Configure the IRQ line */
s3c_gpio_setpull(S3C64XX_GPN(12), S3C_GPIO_PULL_UP);
/* Instantiate the regulators */
for (i = 0; i < ARRAY_SIZE(wm1190_regulators); i++)
wm8350_register_regulator(wm8350,
wm1190_regulators[i].regulator,
wm1190_regulators[i].initdata);
return 0;
}
static struct wm8350_platform_data __initdata smdk6410_wm8350_pdata = {
.init = smdk6410_wm8350_init,
.irq_high = 1,
.irq_base = IRQ_BOARD_START,
};
#endif
#ifdef CONFIG_SMDK6410_WM1192_EV1
static struct gpio_led wm1192_pmic_leds[] = {
{
.name = "PMIC:red:power",
.gpio = GPIO_BOARD_START + 3,
.default_state = LEDS_GPIO_DEFSTATE_ON,
},
};
static struct gpio_led_platform_data wm1192_pmic_led = {
.num_leds = ARRAY_SIZE(wm1192_pmic_leds),
.leds = wm1192_pmic_leds,
};
static struct platform_device wm1192_pmic_led_dev = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &wm1192_pmic_led,
},
};
static int wm1192_pre_init(struct wm831x *wm831x)
{
int ret;
/* Configure the IRQ line */
s3c_gpio_setpull(S3C64XX_GPN(12), S3C_GPIO_PULL_UP);
ret = platform_device_register(&wm1192_pmic_led_dev);
if (ret != 0)
dev_err(wm831x->dev, "Failed to add PMIC LED: %d\n", ret);
return 0;
}
static struct wm831x_backlight_pdata wm1192_backlight_pdata = {
.isink = 1,
.max_uA = 27554,
};
static struct regulator_init_data wm1192_dcdc3 = {
.constraints = {
.name = "PVDD_MEM+PVDD_GPS",
.always_on = 1,
},
};
static struct regulator_consumer_supply wm1192_ldo1_consumers[] = {
{ .supply = "DVDD", .dev_name = "0-001b", }, /* WM8580 */
};
static struct regulator_init_data wm1192_ldo1 = {
.constraints = {
.name = "PVDD_LCD+PVDD_EXT",
.always_on = 1,
},
.consumer_supplies = wm1192_ldo1_consumers,
.num_consumer_supplies = ARRAY_SIZE(wm1192_ldo1_consumers),
};
static struct wm831x_status_pdata wm1192_led7_pdata = {
.name = "LED7:green:",
};
static struct wm831x_status_pdata wm1192_led8_pdata = {
.name = "LED8:green:",
};
static struct wm831x_pdata smdk6410_wm1192_pdata = {
.pre_init = wm1192_pre_init,
.irq_base = IRQ_BOARD_START,
.backlight = &wm1192_backlight_pdata,
.dcdc = {
&smdk6410_vddarm, /* DCDC1 */
&smdk6410_vddint, /* DCDC2 */
&wm1192_dcdc3,
},
.gpio_base = GPIO_BOARD_START,
.ldo = {
&wm1192_ldo1, /* LDO1 */
&smdk6410_vdduh_mmc, /* LDO2 */
NULL, /* LDO3 NC */
&smdk6410_vddotgi, /* LDO4 */
&smdk6410_vddotg, /* LDO5 */
&smdk6410_vddhi, /* LDO6 */
&smdk6410_vddaudio, /* LDO7 */
&smdk6410_vccm2mtv, /* LDO8 */
&smdk6410_vddpll, /* LDO9 */
&smdk6410_vccmc3bt, /* LDO10 */
&smdk6410_vddalive, /* LDO11 */
},
.status = {
&wm1192_led7_pdata,
&wm1192_led8_pdata,
},
};
#endif
static struct i2c_board_info i2c_devs0[] __initdata = {
{ I2C_BOARD_INFO("24c08", 0x50), },
{ I2C_BOARD_INFO("wm8580", 0x1b), },
#ifdef CONFIG_SMDK6410_WM1192_EV1
{ I2C_BOARD_INFO("wm8312", 0x34),
.platform_data = &smdk6410_wm1192_pdata,
.irq = S3C_EINT(12),
},
#endif
#ifdef CONFIG_SMDK6410_WM1190_EV1
{ I2C_BOARD_INFO("wm8350", 0x1a),
.platform_data = &smdk6410_wm8350_pdata,
.irq = S3C_EINT(12),
},
#endif
};
static struct i2c_board_info i2c_devs1[] __initdata = {
{ I2C_BOARD_INFO("24c128", 0x57), },
/* Samsung S524AD0XD1 */
};
static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
.delay
= 10000,
.presc
= 49,
.oversampling_shift
= 2,
};
static void __init smdk6410_map_io(void)
{
u32 tmp;
s3c64xx_init_io(smdk6410_iodesc, ARRAY_SIZE(smdk6410_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smdk6410_uartcfgs, ARRAY_SIZE(smdk6410_uartcfgs));
/* set the LCD type */
tmp = __raw_readl(S3C64XX_SPCON);
tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
__raw_writel(tmp, S3C64XX_SPCON);
/* remove the lcd bypass */
tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
tmp &= ~MIFPCON_LCD_BYPASS;
__raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
}
static void __init smdk6410_machine_init(void)
{
u32 cs1;
s3c_i2c0_set_platdata(NULL);
// s3c_i2c1_set_platdata(NULL);
s3c_fb_set_platdata(&smdk6410_lcd_pdata);
s3c_nand_set_platdata(&ok6410_nand_info);
samsung_keypad_set_platdata(&smdk6410_keypad_data);
// s3c24xx_ts_set_platdata(&s3c_ts_platform);
// s3c_ts_set_platdata(&s3c_ts_platform);
/* configure nCS1 width to 16 bits */
cs1 = __raw_readl(S3C64XX_SROM_BW) &
~(S3C64XX_SROM_BW__CS_MASK << S3C64XX_SROM_BW__NCS1__SHIFT);
cs1 |= ((1 << S3C64XX_SROM_BW__DATAWIDTH__SHIFT) |
(1 << S3C64XX_SROM_BW__WAITENABLE__SHIFT) |
(1 << S3C64XX_SROM_BW__BYTEENABLE__SHIFT)) <<
S3C64XX_SROM_BW__NCS1__SHIFT;
__raw_writel(cs1, S3C64XX_SROM_BW);
/* set timing for nCS1 suitable for ethernet chip */
__raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) |
(6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
(4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
(1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
(0xe << S3C64XX_SROM_BCX__TACC__SHIFT) |
(4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
(0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
gpio_request(S3C64XX_GPN(5), "LCD power");
gpio_request(S3C64XX_GPF(13), "LCD power");
i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
//s3c_ide_set_platdata(&smdk6410_ide_pdata);
platform_add_devices(smdk6410_devices, ARRAY_SIZE(smdk6410_devices));
}
MACHINE_START(SMDK6410, "SMDK6410")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
.boot_params
= S3C64XX_PA_SDRAM + 0x100,
.init_irq
= s3c6410_init_irq,
.map_io
= smdk6410_map_io,
.init_machine
= smdk6410_machine_init,
.timer
= &s3c24xx_timer,
MACHINE_END
{
// LCD support
.virtual = (unsigned long)S3C_VA_LCD,
.pfn = __phys_to_pfn(S3C_PA_FB),
.length = SZ_16K,
.type = MT_DEVICE,
},
};
增加此函数的内容就可解决乱码问题。
完整修改好的文件如下：
/* linux/arch/arm/mach-s3c64xx/mach-smdk6410.c
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/input.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/i2c.h>
#include <linux/leds.h>
#include <linux/fb.h>
#include <linux/gpio.h>
#include <linux/delay.h>
#include <linux/smsc911x.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <linux/pwm_backlight.h>
#ifdef CONFIG_SMDK6410_WM1190_EV1
#include <linux/mfd/wm8350/core.h>
#include <linux/mfd/wm8350/pmic.h>
#endif
#ifdef CONFIG_SMDK6410_WM1192_EV1
#include <linux/mfd/wm831x/core.h>
#include <linux/mfd/wm831x/pdata.h>
#endif
#include <video/platform_lcd.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <mach/hardware.h>
#include <mach/regs-fb.h>
#include <mach/map.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <plat/regs-serial.h>
#include <mach/regs-modem.h>
#include <mach/regs-gpio.h>
#include <mach/regs-sys.h>
#include <mach/regs-srom.h>
#include <plat/ata.h>
#include <plat/iic.h>
#include <plat/fb.h>
#include <plat/gpio-cfg.h>
#include <mach/s3c6410.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/adc.h>
#include <plat/ts.h>
#include <plat/keypad.h>
#include <mach/ts.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <plat/nand.h>
#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
// add by acanoe first
extern void s3c64xx_reserve_bootmem(void); //add by acanoe
struct mtd_partition ok6410_nand_part[] = {
{
.name = "Bootloader",
.offset
= 0,
.size = (2 * SZ_1M),
.mask_flags
= MTD_CAP_NANDFLASH,
},
{
.name = "Kernel",
.offset
= (2 * SZ_1M),
.size = (5*SZ_1M) ,
.mask_flags
= MTD_CAP_NANDFLASH,
},
{
.name = "User",
.offset
= (7 * SZ_1M),
.size = (200*SZ_1M) ,
},
{
.name = "File System",
.offset
= MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
}
};
static struct s3c2410_nand_set ok6410_nand_sets[] = {
[0] = {
.name = "nand",
.nr_chips = 1,
.nr_partitions = ARRAY_SIZE(ok6410_nand_part),
.partitions = ok6410_nand_part,
},
};
static struct s3c2410_platform_nand ok6410_nand_info = {
.tacls = 25,
.twrph0 = 55,
.twrph1 = 40,
.nr_sets = ARRAY_SIZE(ok6410_nand_sets),
.sets = ok6410_nand_sets,
};
//add by acanoe first
static
124b8
struct s3c2410_uartcfg smdk6410_uartcfgs[] __initdata = {
[0] = {
.hwport
= 0,
.flags
= 0,
.ucon = UCON,
.ulcon
= ULCON,
.ufcon
= UFCON,
},
[1] = {
.hwport
= 1,
.flags
= 0,
.ucon = UCON,
.ulcon
= ULCON,
.ufcon
= UFCON,
},
[2] = {
.hwport
= 2,
.flags
= 0,
.ucon = UCON,
.ulcon
= ULCON,
.ufcon
= UFCON,
},
[3] = {
.hwport
= 3,
.flags
= 0,
.ucon = UCON,
.ulcon
= ULCON,
.ufcon
= UFCON,
},
};
/* framebuffer and LCD setup. */
/* GPF15 = LCD backlight control
* GPF13 => Panel power
* GPN5 = LCD nRESET signal
* PWM_TOUT1 => backlight brightness
*/
static void smdk6410_lcd_power_set(struct plat_lcd_data *pd,
unsigned int power)
{
if (power) {
gpio_direction_output(S3C64XX_GPF(13), 1);
/* fire nRESET on power up */
gpio_direction_output(S3C64XX_GPN(5), 0);
msleep(10);
gpio_direction_output(S3C64XX_GPN(5), 1);
msleep(1);
} else {
gpio_direction_output(S3C64XX_GPF(13), 0);
}
}
static struct plat_lcd_data smdk6410_lcd_power_data = {
.set_power
= smdk6410_lcd_power_set,
};
static struct platform_device smdk6410_lcd_powerdev = {
.name = "platform-lcd",
.dev.parent
= &s3c_device_fb.dev,
.dev.platform_data
= &smdk6410_lcd_power_data,
};
static struct s3c_fb_pd_win smdk6410_fb_win0 = {
/* this is to ensure we use win0 */
.win_mode
= {
.left_margin
= 8,
.right_margin
= 13,
.upper_margin
= 7,
.lower_margin
= 5,
.hsync_len
= 3,
.vsync_len
= 1,
.xres = 800,
.yres = 480,
},
.max_bpp
= 32,
.default_bpp
= 16,
.virtual_y
= 480 * 2,
.virtual_x
= 800,
};
/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
static struct s3c_fb_platdata smdk6410_lcd_pdata __initdata = {
.setup_gpio
= s3c64xx_fb_gpio_setup_24bpp,
.win[0]
= &smdk6410_fb_win0,
.vidcon0
= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
.vidcon1
= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
};
/*
* Configuring Ethernet on SMDK6410
*
* Both CS8900A and LAN9115 chips share one chip select mediated by CFG6.
* The constant address below corresponds to nCS1
*
* 1) Set CFGB2 p3 ON others off, no other CFGB selects "ethernet"
* 2) CFG6 needs to be switched to "LAN9115" side
*/
static struct resource smdk6410_smsc911x_resources[] = {
[0] = {
.start = S3C64XX_PA_XM0CSN1,
.end = S3C64XX_PA_XM0CSN1 + SZ_64K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = S3C_EINT(10),
.end = S3C_EINT(10),
.flags = IORESOURCE_IRQ | IRQ_TYPE_LEVEL_LOW,
},
};
static struct smsc911x_platform_config smdk6410_smsc911x_pdata = {
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
.irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
.flags = SMSC911X_USE_32BIT | SMSC911X_FORCE_INTERNAL_PHY,
.phy_interface = PHY_INTERFACE_MODE_MII,
};
static struct platform_device smdk6410_smsc911x = {
.name = "smsc911x",
.id = -1,
.num_resources = ARRAY_SIZE(smdk6410_smsc911x_resources),
.resource = &smdk6410_smsc911x_resources[0],
.dev = {
.platform_data = &smdk6410_smsc911x_pdata,
},
};
#ifdef CONFIG_REGULATOR
static struct regulator_consumer_supply smdk6410_b_pwr_5v_consumers[] = {
{
/* WM8580 */
.supply = "PVDD",
.dev_name = "0-001b",
},
{
/* WM8580 */
.supply = "AVDD",
.dev_name = "0-001b",
},
};
static struct regulator_init_data smdk6410_b_pwr_5v_data = {
.constraints = {
.always_on = 1,
},
.num_consumer_supplies = ARRAY_SIZE(smdk6410_b_pwr_5v_consumers),
.consumer_supplies = smdk6410_b_pwr_5v_consumers,
};
static struct fixed_voltage_config smdk6410_b_pwr_5v_pdata = {
.supply_name = "B_PWR_5V",
.microvolts = 5000000,
.init_data = &smdk6410_b_pwr_5v_data,
.gpio = -EINVAL,
};
static struct platform_device smdk6410_b_pwr_5v = {
.name = "reg-fixed-voltage",
.id = -1,
.dev = {
.platform_data = &smdk6410_b_pwr_5v_pdata,
},
};
#endif
static struct s3c_ide_platdata smdk6410_ide_pdata __initdata = {
.setup_gpio
= s3c64xx_ide_setup_gpio,
};
static uint32_t smdk6410_keymap[] __initdata = {
/* KEY(row, col, keycode) */
KEY(0, 3, KEY_1), KEY(0, 4, KEY_2), KEY(0, 5, KEY_3),
KEY(0, 6, KEY_4), KEY(0, 7, KEY_5),
KEY(1, 3, KEY_A), KEY(1, 4, KEY_B), KEY(1, 5, KEY_C),
KEY(1, 6, KEY_D), KEY(1, 7, KEY_E)
};
static struct matrix_keymap_data smdk6410_keymap_data __initdata = {
.keymap
= smdk6410_keymap,
.keymap_size
= ARRAY_SIZE(smdk6410_keymap),
};
static struct samsung_keypad_platdata smdk6410_keypad_data __initdata = {
.keymap_data
= &smdk6410_keymap_data,
.rows = 2,
.cols = 8,
};
static int smdk6410_backlight_init(struct device *dev)
{
int ret;
ret = gpio_request(S3C64XX_GPF(15), "Backlight");
if (ret) {
printk(KERN_ERR "failed to request GPF for PWM-OUT1\n");
return ret;
}
/* Configure GPIO pin with S3C64XX_GPF15_PWM_TOUT1 */
s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_SFN(2));
return 0;
}
static void smdk6410_backlight_exit(struct device *dev)
{
s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_OUTPUT);
gpio_free(S3C64XX_GPF(15));
}
static struct platform_pwm_backlight_data smdk6410_backlight_data = {
.pwm_id
= 1,
.max_brightness
= 255,
.dft_brightness
= 255,
.pwm_period_ns
= 78770,
.init = smdk6410_backlight_init,
.exit = smdk6410_backlight_exit,
};
static struct platform_device smdk6410_backlight_device = {
.name = "pwm-backlight",
.dev = {
.parent
= &s3c_device_timer[1].dev,
.platform_data
= &smdk6410_backlight_data,
},
};
static struct map_desc smdk6410_iodesc[] = {
{
// LCD support
.virtual = (unsigned long)S3C_VA_LCD,
.pfn = __phys_to_pfn(S3C_PA_FB),
.length = SZ_16K,
.type = MT_DEVICE,
},
};
static struct platform_device *smdk6410_devices[] __initdata = {
//#ifdef CONFIG_SMDK6410_SD_CH0 //Canceled by acanoe
&s3c_device_hsmmc0,
//#endif //Canceled by acanoe
//#ifdef CONFIG_SMDK6410_SD_CH1 //Canceled by acanoe
&s3c_device_hsmmc1,
//#endif //Canceled by acanoe
&s3c_device_i2c0,
// &s3c_device_i2c1,
//Canceled by acanoe
&s3c_device_fb,
&s3c_device_ohci,
&s3c_device_usb_hsotg,
// &s3c64xx_device_iisv4,
//Canceled by acanoe
// &samsung_device_keypad,
//Canceled by acanoe
// add by acanoe 2
&s3c_device_nand,
#ifdef CONFIG_DM9000
// &s3c_device_dm9000,
#endif
// add by acanoe 2
#ifdef CONFIG_REGULATOR
&smdk6410_b_pwr_5v,
#endif
&smdk6410_lcd_powerdev,
// &smdk6410_smsc911x,
// Canceled by acanoe
&s3c_device_adc,
// &s3c_device_cfcon,
// Canceled by acanoe
&s3c_device_rtc,
// &s3c_device_ts,
// Canceled by acanoe
// &s3c_device_wdt,
};
#ifdef CONFIG_REGULATOR
/* ARM core */
static struct regulator_consumer_supply smdk6410_vddarm_consumers[] = {
{
.supply = "vddarm",
}
};
/* VDDARM, BUCK1 on J5 */
static struct regulator_init_data smdk6410_vddarm = {
.constraints = {
.name = "PVDD_ARM",
.min_uV = 1000000,
.max_uV = 1300000,
.always_on = 1,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
},
.num_consumer_supplies = ARRAY_SIZE(smdk6410_vddarm_consumers),
.consumer_supplies = smdk6410_vddarm_consumers,
};
/* VDD_INT, BUCK2 on J5 */
static struct regulator_init_data smdk6410_vddint = {
.constraints = {
.name = "PVDD_INT",
.min_uV = 1000000,
.max_uV = 1200000,
.always_on = 1,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
},
};
/* VDD_HI, LDO3 on J5 */
static struct regulator_init_data smdk6410_vddhi = {
.constraints = {
.name = "PVDD_HI",
.always_on = 1,
},
};
/* VDD_PLL, LDO2 on J5 */
static struct regulator_init_data smdk6410_vddpll = {
.constraints = {
.name = "PVDD_PLL",
.always_on = 1,
},
};
/* VDD_UH_MMC, LDO5 on J5 */
static struct regulator_init_data smdk6410_vdduh_mmc = {
.constraints = {
.name = "PVDD_UH+PVDD_MMC",
.always_on = 1,
},
};
/* VCCM3BT, LDO8 on J5 */
static struct regulator_init_data smdk6410_vccmc3bt = {
.constraints = {
.name = "PVCCM3BT",
.always_on = 1,
},
};
/* VCCM2MTV, LDO11 on J5 */
static struct regulator_init_data smdk6410_vccm2mtv = {
.constraints = {
.name = "PVCCM2MTV",
.always_on = 1,
},
};
/* VDD_LCD, LDO12 on J5 */
static struct regulator_init_data smdk6410_vddlcd = {
.constraints = {
.name = "PVDD_LCD",
.always_on = 1,
},
};
/* VDD_OTGI, LDO9 on J5 */
static struct regulator_init_data smdk6410_vddotgi = {
.constraints = {
.name = "PVDD_OTGI",
.always_on = 1,
},
};
/* VDD_OTG, LDO14 on J5 */
static struct regulator_init_data smdk6410_vddotg = {
.constraints = {
.name = "PVDD_OTG",
.always_on = 1,
},
};
/* VDD_ALIVE, LDO15 on J5 */
static struct regulator_init_data smdk6410_vddalive = {
.constraints = {
.name = "PVDD_ALIVE",
.always_on = 1,
},
};
/* VDD_AUDIO, VLDO_AUDIO on J5 */
static struct regulator_init_data smdk6410_vddaudio = {
.constraints = {
.name = "PVDD_AUDIO",
.always_on = 1,
},
};
#endif
#ifdef CONFIG_SMDK6410_WM1190_EV1
/* S3C64xx internal logic & PLL */
static struct regulator_init_data wm8350_dcdc1_data = {
.constraints = {
.name = "PVDD_INT+PVDD_PLL",
.min_uV = 1200000,
.max_uV = 1200000,
.always_on = 1,
.apply_uV = 1,
},
};
/* Memory */
static struct regulator_init_data wm8350_dcdc3_data = {
.constraints = {
.name = "PVDD_MEM",
.min_uV = 1800000,
.max_uV = 1800000,
.always_on = 1,
.state_mem = {
.uV = 1800000,
.mode = REGULATOR_MODE_NORMAL,
.enabled = 1,
},
.initial_state = PM_SUSPEND_MEM,
},
};
/* USB, EXT, PCM, ADC/DAC, USB, MMC */
static struct regulator_consumer_supply wm8350_dcdc4_consumers[] = {
{
/* WM8580 */
.supply = "DVDD",
.dev_name = "0-001b",
},
};
static struct regulator_init_data wm8350_dcdc4_data = {
.constraints = {
.name = "PVDD_HI+PVDD_EXT+PVDD_SYS+PVCCM2MTV",
.min_uV = 3000000,
.max_uV = 3000000,
.always_on = 1,
},
.num_consumer_supplies = ARRAY_SIZE(wm8350_dcdc4_consumers),
.consumer_supplies = wm8350_dcdc4_consumers,
};
/* OTGi/1190-EV1 HPVDD & AVDD */
static struct regulator_init_data wm8350_ldo4_data = {
.constraints = {
.name = "PVDD_OTGI+HPVDD+AVDD",
.min_uV = 1200000,
.max_uV = 1200000,
.apply_uV = 1,
.always_on = 1,
},
};
static struct {
int regulator;
struct regulator_init_data *initdata;
} wm1190_regulators[] = {
{ WM8350_DCDC_1, &wm8350_dcdc1_data },
{ WM8350_DCDC_3, &wm8350_dcdc3_data },
{ WM8350_DCDC_4, &wm8350_dcdc4_data },
{ WM8350_DCDC_6, &smdk6410_vddarm },
{ WM8350_LDO_1, &smdk6410_vddalive },
{ WM8350_LDO_2, &smdk6410_vddotg },
{ WM8350_LDO_3, &smdk6410_vddlcd },
{ WM8350_LDO_4, &wm8350_ldo4_data },
};
static int __init smdk6410_wm8350_init(struct wm8350 *wm8350)
{
int i;
/* Configure the IRQ line */
s3c_gpio_setpull(S3C64XX_GPN(12), S3C_GPIO_PULL_UP);
/* Instantiate the regulators */
for (i = 0; i < ARRAY_SIZE(wm1190_regulators); i++)
wm8350_register_regulator(wm8350,
wm1190_regulators[i].regulator,
wm1190_regulators[i].initdata);
return 0;
}
static struct wm8350_platform_data __initdata smdk6410_wm8350_pdata = {
.init = smdk6410_wm8350_init,
.irq_high = 1,
.irq_base = IRQ_BOARD_START,
};
#endif
#ifdef CONFIG_SMDK6410_WM1192_EV1
static struct gpio_led wm1192_pmic_leds[] = {
{
.name = "PMIC:red:power",
.gpio = GPIO_BOARD_START + 3,
.default_state = LEDS_GPIO_DEFSTATE_ON,
},
};
static struct gpio_led_platform_data wm1192_pmic_led = {
.num_leds = ARRAY_SIZE(wm1192_pmic_leds),
.leds = wm1192_pmic_leds,
};
static struct platform_device wm1192_pmic_led_dev = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &wm1192_pmic_led,
},
};
static int wm1192_pre_init(struct wm831x *wm831x)
{
int ret;
/* Configure the IRQ line */
s3c_gpio_setpull(S3C64XX_GPN(12), S3C_GPIO_PULL_UP);
ret = platform_device_register(&wm1192_pmic_led_dev);
if (ret != 0)
dev_err(wm831x->dev, "Failed to add PMIC LED: %d\n", ret);
return 0;
}
static struct wm831x_backlight_pdata wm1192_backlight_pdata = {
.isink = 1,
.max_uA = 27554,
};
static struct regulator_init_data wm1192_dcdc3 = {
.constraints = {
.name = "PVDD_MEM+PVDD_GPS",
.always_on = 1,
},
};
static struct regulator_consumer_supply wm1192_ldo1_consumers[] = {
{ .supply = "DVDD", .dev_name = "0-001b", }, /* WM8580 */
};
static struct regulator_init_data wm1192_ldo1 = {
.constraints = {
.name = "PVDD_LCD+PVDD_EXT",
.always_on = 1,
},
.consumer_supplies = wm1192_ldo1_consumers,
.num_consumer_supplies = ARRAY_SIZE(wm1192_ldo1_consumers),
};
static struct wm831x_status_pdata wm1192_led7_pdata = {
.name = "LED7:green:",
};
static struct wm831x_status_pdata wm1192_led8_pdata = {
.name = "LED8:green:",
};
static struct wm831x_pdata smdk6410_wm1192_pdata = {
.pre_init = wm1192_pre_init,
.irq_base = IRQ_BOARD_START,
.backlight = &wm1192_backlight_pdata,
.dcdc = {
&smdk6410_vddarm, /* DCDC1 */
&smdk6410_vddint, /* DCDC2 */
&wm1192_dcdc3,
},
.gpio_base = GPIO_BOARD_START,
.ldo = {
&wm1192_ldo1, /* LDO1 */
&smdk6410_vdduh_mmc, /* LDO2 */
NULL, /* LDO3 NC */
&smdk6410_vddotgi, /* LDO4 */
&smdk6410_vddotg, /* LDO5 */
&smdk6410_vddhi, /* LDO6 */
&smdk6410_vddaudio, /* LDO7 */
&smdk6410_vccm2mtv, /* LDO8 */
&smdk6410_vddpll, /* LDO9 */
&smdk6410_vccmc3bt, /* LDO10 */
&smdk6410_vddalive, /* LDO11 */
},
.status = {
&wm1192_led7_pdata,
&wm1192_led8_pdata,
},
};
#endif
static struct i2c_board_info i2c_devs0[] __initdata = {
{ I2C_BOARD_INFO("24c08", 0x50), },
{ I2C_BOARD_INFO("wm8580", 0x1b), },
#ifdef CONFIG_SMDK6410_WM1192_EV1
{ I2C_BOARD_INFO("wm8312", 0x34),
.platform_data = &smdk6410_wm1192_pdata,
.irq = S3C_EINT(12),
},
#endif
#ifdef CONFIG_SMDK6410_WM1190_EV1
{ I2C_BOARD_INFO("wm8350", 0x1a),
.platform_data = &smdk6410_wm8350_pdata,
.irq = S3C_EINT(12),
},
#endif
};
static struct i2c_board_info i2c_devs1[] __initdata = {
{ I2C_BOARD_INFO("24c128", 0x57), },
/* Samsung S524AD0XD1 */
};
static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
.delay
= 10000,
.presc
= 49,
.oversampling_shift
= 2,
};
static void __init smdk6410_map_io(void)
{
u32 tmp;
s3c64xx_init_io(smdk6410_iodesc, ARRAY_SIZE(smdk6410_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smdk6410_uartcfgs, ARRAY_SIZE(smdk6410_uartcfgs));
/* set the LCD type */
tmp = __raw_readl(S3C64XX_SPCON);
tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
__raw_writel(tmp, S3C64XX_SPCON);
/* remove the lcd bypass */
tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
tmp &= ~MIFPCON_LCD_BYPASS;
__raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
}
static void __init smdk6410_machine_init(void)
{
u32 cs1;
s3c_i2c0_set_platdata(NULL);
// s3c_i2c1_set_platdata(NULL);
s3c_fb_set_platdata(&smdk6410_lcd_pdata);
s3c_nand_set_platdata(&ok6410_nand_info);
samsung_keypad_set_platdata(&smdk6410_keypad_data);
// s3c24xx_ts_set_platdata(&s3c_ts_platform);
// s3c_ts_set_platdata(&s3c_ts_platform);
/* configure nCS1 width to 16 bits */
cs1 = __raw_readl(S3C64XX_SROM_BW) &
~(S3C64XX_SROM_BW__CS_MASK << S3C64XX_SROM_BW__NCS1__SHIFT);
cs1 |= ((1 << S3C64XX_SROM_BW__DATAWIDTH__SHIFT) |
(1 << S3C64XX_SROM_BW__WAITENABLE__SHIFT) |
(1 << S3C64XX_SROM_BW__BYTEENABLE__SHIFT)) <<
S3C64XX_SROM_BW__NCS1__SHIFT;
__raw_writel(cs1, S3C64XX_SROM_BW);
/* set timing for nCS1 suitable for ethernet chip */
__raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) |
(6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
(4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
(1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
(0xe << S3C64XX_SROM_BCX__TACC__SHIFT) |
(4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
(0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
gpio_request(S3C64XX_GPN(5), "LCD power");
gpio_request(S3C64XX_GPF(13), "LCD power");
i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
//s3c_ide_set_platdata(&smdk6410_ide_pdata);
platform_add_devices(smdk6410_devices, ARRAY_SIZE(smdk6410_devices));
}
MACHINE_START(SMDK6410, "SMDK6410")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
.boot_params
= S3C64XX_PA_SDRAM + 0x100,
.init_irq
= s3c6410_init_irq,
.map_io
= smdk6410_map_io,
.init_machine
= smdk6410_machine_init,
.timer
= &s3c24xx_timer,
MACHINE_END
内容来自用户分享和网络整理，不保证内容的准确性，如有侵权内容，可联系管理员处理 
相关文章推荐
- 两种解决Qt5显示中文乱码的方法（使用QStringLiteral和#pragma execution_character_set("utf-8")两种方法）
- mysql导入导出数据中文乱码解决方法小结(1、navicat导入问题已解决，创建连接后修改连接属性，选择高级->将使用Mysql字符集复选框去掉，下拉框选择GBK->导入sql文件OK;2、phpmyadmin显示乱码的问题也解决，两步：1.将sql文件以utf8的字符集编码另存，2.将文件中sql语句中的字段字符集编码改成utf8,导入OK)
- 使用SecureCRT登陆RHEL系统显示中文乱码的解决方法
- 在servlet里面使用printWriter输出ireport到jsp显示乱码的解决方法
- 使用WinSCP 上传 jeecms 到linux centos中 显示乱码问题，网站无法使用的解决方法
- 使用SecureCRT登陆RHEL系统显示中文乱码的解决方法
- windows中vim显示乱码的解决方法
- Weblogic: 在weblogic8.1中显示中文乱码的解决方法
- TOMCAT4.1.29中文显示乱码解决方法
- ASP.NET中文显示乱码之解决方法
- Mysql和网页显示乱码解决方法集锦
- SQL2000中文显示乱码解决方法
- 关于htmlparsr在显示繁体中文时出现乱码的原因分析和解决方法
- 解决delphi2007下dbexpress连mysql5时中文显示乱码（文中有可连非默认端口的方法）
- AS4在Terminal下中文显示乱码的解决方法
- 解决ajax获取页面直接显示乱码的方法
- virtual pc 2007(vpc2007) 使用中无法显示控制主界面的解决方法
- ASP.NET中文显示乱码之解决方法
- ASP.NET中文显示乱码之解决方法
- jsp显示中文为乱码的解决方法