XEN 4.1.0 PVOPS设置和启动中遇到的一些问题

前段时间由于一些特殊的需求，需要使用2.6.39版本的linux内核安装xen，遇到了一些问题，总结一下。

第一步下载内核，www.kernel.org，我当时用的是rc-3版本的内核。解压，OK。

第二步配置内核，进入解压后的内核目录，make menuconfig进入配置界面，具体配置参考
http://wiki.xensource.com/xenwiki/XenParavirtOps
第三步编译内核，修改grub，重启。

好了现在我们使用2.6.39内核启动了.

但此时无法启动xend，很费解。于是查log。

/var/log/xen/xend-debug.log:

cat: /sys/bus/scsi/devices/host0/vendor: No such file or directory
cat: /sys/bus/scsi/devices/host0/model: No such file or directory
cat: /sys/bus/scsi/devices/host0/type: No such file or directory
cat: /sys/bus/scsi/devices/host0/rev: No such file or directory
cat: /sys/bus/scsi/devices/host0/scsi_level: No such file or directory
cat: /sys/bus/scsi/devices/host1/vendor: No such file or directory
cat: /sys/bus/scsi/devices/host1/model: No such file or directory
cat: /sys/bus/scsi/devices/host1/type: No such file or directory
cat: /sys/bus/scsi/devices/host1/rev: No such file or directory
cat: /sys/bus/scsi/devices/host1/scsi_level: No such file or directory
cat: /sys/bus/scsi/devices/host2/vendor: No such file or directory
cat: /sys/bus/scsi/devices/host2/model: No such file or directory
cat: /sys/bus/scsi/devices/host2/type: No such file or directory
cat: /sys/bus/scsi/devices/host2/rev: No such file or directory
cat: /sys/bus/scsi/devices/host2/scsi_level: No such file or directory
cat: /sys/bus/scsi/devices/host3/vendor: No such file or directory
cat: /sys/bus/scsi/devices/host3/model: No such file or directory
cat: /sys/bus/scsi/devices/host3/type: No such file or directory
cat: /sys/bus/scsi/devices/host3/rev: No such file or directory
cat: /sys/bus/scsi/devices/host3/scsi_level: No such file or directory
cat: /sys/bus/scsi/devices/host4/vendor: No such file or directory
cat: /sys/bus/scsi/devices/host4/model: No such file or directory
cat: /sys/bus/scsi/devices/host4/type: No such file or directory
cat: /sys/bus/scsi/devices/host4/rev: No such file or directory
cat: /sys/bus/scsi/devices/host4/scsi_level: No such file or directory
cat: /sys/bus/scsi/devices/host5/vendor: No such file or directory
cat: /sys/bus/scsi/devices/host5/model: No such file or directory
cat: /sys/bus/scsi/devices/host5/type: No such file or directory
cat: /sys/bus/scsi/devices/host5/rev: No such file or directory
cat: /sys/bus/scsi/devices/host5/scsi_level: No such file or directory
cat: /sys/bus/scsi/devices/target2:0:0/vendor: No such file or directory
cat: /sys/bus/scsi/devices/target2:0:0/model: No such file or directory
cat: /sys/bus/scsi/devices/target2:0:0/type: No such file or directory
cat: /sys/bus/scsi/devices/target2:0:0/rev: No such file or directory
cat: /sys/bus/scsi/devices/target2:0:0/scsi_level: No such file or directory
cat: /sys/bus/scsi/devices/target3:0:0/vendor: No such file or directory
cat: /sys/bus/scsi/devices/target3:0:0/model: No such file or directory
cat: /sys/bus/scsi/devices/target3:0:0/type: No such file or directory
cat: /sys/bus/scsi/devices/target3:0:0/rev: No such file or directory
cat: /sys/bus/scsi/devices/target3:0:0/scsi_level: No such file or directory
搜了一下，在启动xend之前需要先通过xencommons进行初始化。

/etc/init.d/xencommons start
于是又出错误：

Starting xenstored…FATAL:Failed to open evtchn device: No such file or directory
...........
Could not start xenstored.
竟然还要先手动加载evtchn模块

modprobe xen-evtchn
再运行xencommons，成功。

启动xend，成功。

P.S. 加载模块的这一步，不一定只有evtchn一个。例如要用grant table 的话，还需要加载xen-gntalloc。等等。

如果还是无法启动，请关闭selinux；

本文出自 “尼古风锁丝愁过” 博客，请务必保留此出处http://smoke520.blog.51cto.com/9256117/1834151