在Linux系统中用LoadRunner做压力测试需要开启rstat协议
2016-08-01 09:34
387 查看
rstat协议允许网络上的用户获得同一网络上各机器的性能参数。 需要下载3个包:
(1)rsh-0.17-14.i386.rpm
(2)rsh-server-0.17-14.i386.rpm
(3)rpc.rstatd-4.0.1.tar.gz 一、安装rsh查看是否安装并卸载rsh[root@localhost/]# rpm -qa |grep rsh --查看是否安装rsh[root@localhost/]# rpm -e + 版本号 --卸载该版本 安装rsh,rsh-server[root@localhost/]# rpm -ivh rsh-0.17-14.i386.rpm[root@localhost/]# rpm -ivh rsh-server-0.17-14.i386.rpm或[root@localhost /]#yum-y install rsh* 二、安装rstatd 下载并安装rstatd,下载地址:http://sourceforge.net/projects/rstatd,上传至/usr/local 查看是否安装,一般来说Linux都没有安装[root@localhost/]# find / -name rpc.rstatd安装rstatd[root@localhost/]# tar -xzvf rpc.rstatd-4.0.1.tar.gz[root@localhost/]# cd rpc.rstatd-4.0.1[root@localhost /]# ./configure[root@localhost/]# make[root@localhost/]# make install 三、安装完成后配置rstatd目标守护进程xinetd,配置文件于/etc/xinet.d目录下修改/etc/xinetd.d目录下面的3个conf(rogin,rsh,rexec)中的disable均设置为no[root@localhost/]# cd /etc/xinetd.d --进入到/etc/xinetd.conf目录中[root@localhost/]# vi rlogin --编辑disable=no,保存[root@localhost/]# vi rsh --编辑disable=no,保存[root@localhost/]# vi rexec --编辑disable=no,保存 四、启动rpc.rstatd[root@localhost/]# rpc.rstatd --启动rpc.rstatd进程[root@localhost/]# rpcinfo-p --执行此命令检查rpc服务的状态
如果未出现上图的rstatd说明没有安装成功,需要重复以上步骤。到这里为止,LR监控Linux必要的服务都已安装好了。 五、关闭防火墙[root@localhost/]# service iptables stop 六、利用LR中的Controller监控Linux资源1. 在Controller中,将System Resource Graphs中的Unix resources拖到右侧的资源监控区域。2. 鼠标右键选择Add Measurements,添加被监控Linux的IP地址x.x.x.x,选择需要监控的性能指标,确认。注意:监控过程中要关闭Linux防火墙,否则可能会监控失败 七、遇到的问题1. LoadRunner监控Linux资源时弹出如下错误:Monitor name :UNIXResources. Cannot initialize the monitoring on 192.168.52.189. Error whilecreating the RPC client. Ensure that the machine can be connected and that itruns the rstat daemon (use rpcinfo utility for this verification). Detailederror: RPC: Failed to create RPC client.
RPC-TCP: Failed toestablish RPC server address.原因:Linux系统中没有安装rpc.rstatd,服务未开启的原因造成的。解决办法:照上述方法安装rpc.rstatd并开启即可监控Linux. 2. configure:error: no acceptable C compiler found in $PATH原因:未安装gcc编译器. 在命令行里敲入gcc –v,如果提示command not found 就表示你的系统里没有安装gcc编译器解决办法:yum install gcc 简单介绍监控UNIXlr监控UNIX ,UNIX先启动一rstatd服务
以下是在IBM AIX系统中启动rstatd服务的方法:
1、 使用telnet以root用户的身份登录入AIX系统
2、 在命令行提示符下输入:vi /etc/inetd.conf
3、 查找rstatd,找到
#rstatd sunrpc_udp udp wait root /usr/sbin/rpc.rstatd rstatd 100001 1-3
4、将#去掉
5、:wq保存修改结果
6、命令提示符下输入:refresh –s inetd 重新启动服务。
这样使用loadrunner就可以监视AIX系统的性能情况了。
注:在HP UNIX系统上编辑完inetd.conf后,重启inetd服务需要输入inetd -c
UNIX上也可以用rup命令查看rstatd程序是否被配置并激活
若rstatd程序已经运行,重启时,先查看进程ps -ef |grep inet,然后杀掉进程,再refresh –s inetd进行重启。
(1)rsh-0.17-14.i386.rpm
(2)rsh-server-0.17-14.i386.rpm
(3)rpc.rstatd-4.0.1.tar.gz 一、安装rsh查看是否安装并卸载rsh[root@localhost/]# rpm -qa |grep rsh --查看是否安装rsh[root@localhost/]# rpm -e + 版本号 --卸载该版本 安装rsh,rsh-server[root@localhost/]# rpm -ivh rsh-0.17-14.i386.rpm[root@localhost/]# rpm -ivh rsh-server-0.17-14.i386.rpm或[root@localhost /]#yum-y install rsh* 二、安装rstatd 下载并安装rstatd,下载地址:http://sourceforge.net/projects/rstatd,上传至/usr/local 查看是否安装,一般来说Linux都没有安装[root@localhost/]# find / -name rpc.rstatd安装rstatd[root@localhost/]# tar -xzvf rpc.rstatd-4.0.1.tar.gz[root@localhost/]# cd rpc.rstatd-4.0.1[root@localhost /]# ./configure[root@localhost/]# make[root@localhost/]# make install 三、安装完成后配置rstatd目标守护进程xinetd,配置文件于/etc/xinet.d目录下修改/etc/xinetd.d目录下面的3个conf(rogin,rsh,rexec)中的disable均设置为no[root@localhost/]# cd /etc/xinetd.d --进入到/etc/xinetd.conf目录中[root@localhost/]# vi rlogin --编辑disable=no,保存[root@localhost/]# vi rsh --编辑disable=no,保存[root@localhost/]# vi rexec --编辑disable=no,保存 四、启动rpc.rstatd[root@localhost/]# rpc.rstatd --启动rpc.rstatd进程[root@localhost/]# rpcinfo-p --执行此命令检查rpc服务的状态
如果未出现上图的rstatd说明没有安装成功,需要重复以上步骤。到这里为止,LR监控Linux必要的服务都已安装好了。 五、关闭防火墙[root@localhost/]# service iptables stop 六、利用LR中的Controller监控Linux资源1. 在Controller中,将System Resource Graphs中的Unix resources拖到右侧的资源监控区域。2. 鼠标右键选择Add Measurements,添加被监控Linux的IP地址x.x.x.x,选择需要监控的性能指标,确认。注意:监控过程中要关闭Linux防火墙,否则可能会监控失败 七、遇到的问题1. LoadRunner监控Linux资源时弹出如下错误:Monitor name :UNIXResources. Cannot initialize the monitoring on 192.168.52.189. Error whilecreating the RPC client. Ensure that the machine can be connected and that itruns the rstat daemon (use rpcinfo utility for this verification). Detailederror: RPC: Failed to create RPC client.
RPC-TCP: Failed toestablish RPC server address.原因:Linux系统中没有安装rpc.rstatd,服务未开启的原因造成的。解决办法:照上述方法安装rpc.rstatd并开启即可监控Linux. 2. configure:error: no acceptable C compiler found in $PATH原因:未安装gcc编译器. 在命令行里敲入gcc –v,如果提示command not found 就表示你的系统里没有安装gcc编译器解决办法:yum install gcc 简单介绍监控UNIXlr监控UNIX ,UNIX先启动一rstatd服务
以下是在IBM AIX系统中启动rstatd服务的方法:
1、 使用telnet以root用户的身份登录入AIX系统
2、 在命令行提示符下输入:vi /etc/inetd.conf
3、 查找rstatd,找到
#rstatd sunrpc_udp udp wait root /usr/sbin/rpc.rstatd rstatd 100001 1-3
4、将#去掉
5、:wq保存修改结果
6、命令提示符下输入:refresh –s inetd 重新启动服务。
这样使用loadrunner就可以监视AIX系统的性能情况了。
注:在HP UNIX系统上编辑完inetd.conf后,重启inetd服务需要输入inetd -c
UNIX上也可以用rup命令查看rstatd程序是否被配置并激活
若rstatd程序已经运行,重启时,先查看进程ps -ef |grep inet,然后杀掉进程,再refresh –s inetd进行重启。
相关文章推荐
- 【软件性能测试-LoadRunner实战技能 16】== LoadRunner_开启系统资源监控
- loadrunner测试c/s架构的应用系统所用协议(转:怎样进行c/s性能测试)
- 在Linux系统的服务器上使用Memtester进行内存压力测试
- LINUX系统下MySQL 压力测试工具super smack
- 使用LTP套件对Linux系统进行压力测试
- LoadRunner压力测试时监控服务器Linux的资源情况
- LoadRunner压力测试时监控服务器Linux的资源情况
- 压力测试时候Linux系统参数的调优
- LoadRunner压力测试时监控服务器Linux的资源情况
- LoadRunner压力测试时监控服务器Linux的资源情况
- LoadRunner压力测试时监控服务器Linux的资源情况[转]
- stress —linux系统下工作量和压力测试工具
- LoadRunner压力测试时监控服务器Linux的资源情况
- LoadRunner压力测试时监控服务器Linux的资源情况
- loadrunner中实现windows socket协议进行压力测试
- loadrunner中实现windows socket协议进行压力测试
- 在Linux系统的服务器上使用Memtester进行内存压力测试
- linux 大并发测试需要的系统修改
- 使用http_load来给Linux系统的服务器做压力测试
- LoadRunner压力测试时监控服务器Linux的资源情况