nginx改tengine,gitlab重装操作步骤

nginx改tengine

yum -y install gcc gcc-c++ gd gd-devel
cd libunwind-1.1
LAGS=-fPIC ./configure --prefix=/usr/local
make LAGS=-fPIC
make LAGS=-fPIC install
cd gperftools-2.0
./configure --prefix=/usr/local
make && make install
上面两个包需要重新编译
拷贝原来安装的tengine
ls /opt/src,复制到这台机器

gperftools-2.0  nginx-accesskey-2.0.3   ngx-fancyindex  pcre-8.35      zlib-1.2.8
libunwind-1.1   nginx_tcp_proxy_module  openssl-1.0.0o  ruby-2.2.3
nginx-1.6.2     ngx_cache_purge-2.2     openssl-1.0.2   tengine-2.1.2

cd /usr/local/
tar cvzf tengine.tar.gz openssl pcre zlib tengine 需要的一些依赖包
最后一步
ln -s /usr/local/lib/libunwind.so /lib64/libunwind.so.8
ln -s /usr/local/lib/libprofiler.so.0 /lib64
启动
/etc/init.d/tengine start

./nginx -V
loaded modules:
ngx_core_module (static)
ngx_errlog_module (static)
ngx_conf_module (static)
ngx_dso_module (static)
ngx_syslog_module (static)
ngx_events_module (static)
ngx_event_core_module (static)
ngx_epoll_module (static)
ngx_poll_module (static)
ngx_tcp_module (static)
ngx_tcp_core_module (static)
ngx_tcp_upstream_module (static)
ngx_tcp_proxy_module (static)
ngx_tcp_websocket_module (static)
ngx_tcp_upstream_ip_hash_module (static)
ngx_tcp_upstream_busyness_module (static)
ngx_tcp_ssl_module (static)
ngx_procs_module (static)
ngx_proc_core_module (static)
ngx_openssl_module (static)
ngx_regex_module (static)
ngx_http_module (static)
ngx_http_core_module (static)
ngx_http_log_module (static)
ngx_http_upstream_module (static)
ngx_http_static_module (static)
ngx_http_gzip_static_module (static)
ngx_http_autoindex_module (static)
ngx_http_fancyindex_module (static)
ngx_http_index_module (static)
ngx_http_access_module (shared, 3.1)
ngx_http_limit_req_module (shared, 3.1)
ngx_http_auth_basic_module (static)
ngx_http_limit_conn_module (shared, 3.1)
ngx_http_realip_module (static)
ngx_http_geo_module (static)
ngx_http_map_module (static)
ngx_http_split_clients_module (static)
ngx_http_referer_module (static)
ngx_http_ssl_module (static)
ngx_http_proxy_module (static)
ngx_http_fastcgi_module (static)
ngx_http_uwsgi_module (static)
ngx_http_scgi_module (static)
ngx_http_empty_gif_module (static)
ngx_http_browser_module (static)
ngx_http_concat_module (shared, 3.1)
ngx_http_user_agent_module (static)
ngx_http_rewrite_module (shared, 3.1)
ngx_http_sysguard_module (static)
ngx_http_upstream_consistent_hash_module (static)
ngx_http_upstream_check_module (static)
ngx_http_upstream_keepalive_module (static)
ngx_http_upstream_dynamic_module (static)
ngx_http_stub_status_module (static)
ngx_http_accesskey_module (static)
ngx_tcp_upstream_check_status_module (static)
ngx_http_write_filter_module (static)
ngx_http_header_filter_module (static)
ngx_http_chunked_filter_module (static)
ngx_http_range_header_filter_module (static)
ngx_http_gzip_filter_module (static)
ngx_http_postpone_filter_module (static)
ngx_http_ssi_filter_module (static)
ngx_http_charset_filter_module (static)
ngx_http_image_filter_module (static)
ngx_http_sub_filter_module (static)
ngx_http_userid_filter_module (static)
ngx_http_trim_filter_module (shared, 3.1)
ngx_http_footer_filter_module (static)
ngx_http_upstream_session_sticky_module (shared, 3.1)
ngx_http_headers_filter_module (static)
ngx_http_reqstat_module (static)
ngx_http_cache_purge_module (shared, 3.1)
ngx_http_copy_filter_module (static)
ngx_http_range_body_filter_module (static)
ngx_http_not_modified_filter_module (static)
ngx_google_perftools_module (static)

gitlab重装操作步骤
参考 http://lansgg.blog.51cto.com/5675165/1760578
要注意的是，gitlab有个.gitlab_shell_secret，gitlab-shell也有一个，如果你查看gitlab-shell.log，报401错误，那么有可能是这两个文件不一样，实际上就是token。每次安装都会生成，如果你直接cp，以前的和现在安装的就会不一样，我碰到过。
重装的话，参考上面的文档
1.注意gitlab的版本，gitlab安装其实就是在安装ruby的一些依赖包，要保证每一步都是正确的
2.redis最好改成127.0.0.1或则机器ip

3.需要以前的gitlab mysql备份数据库，然后导入到这台上
4.如果tenginx设置端口的，不是默认的80的话，两个config.xml的host都要修改