iOS学习笔记36-Masonry自动布局
2016-05-18 09:32
561 查看
一、Masonry介绍
之前我们在屏幕适配的章节中学习过AutoLayout的使用,但那都是在可视化界面上进行添加约束完成的,我们很多时候都需要在代码中使用
AutoLayout约束,苹果也为我们提供了实现,使用
NSLayoutConstraint类表示约束,但使用起来比较复杂,代码量比较大,例如创建一个约束的方法:
+ (id)constraintWithItem:(id)view1 /* 一个UIView */ attribute:(NSLayoutAttribute)attribute1 /* 属性 */ relatedBy:(NSLayoutRelation)relation /* 关系 */ toItem:(id)view2 /* 另一个UIView */ attribute:(NSLayoutAttribute)attribute2 /* 属性 */ multiplier:(CGFloat)multiplier /* 倍数 */ constant:(CGFloat)constant; /* 偏移 */
如果约束一多,这个方法调用次数就会越多,代码就会变得很长。
实际上我们可以使用第三方框架
Masonry,该框架是一个轻量级的布局框架,封装了
AutoLayout,拥有自己的描述语法,采用更优雅的链式语法,简洁明了,并具有高可读性。
Masonry基本支持
AutoLayout的所有属性:
@property (nonatomic, strong, readonly) MASConstraint *left; @property (nonatomic, strong, readonly) MASConstraint *top; @property (nonatomic, strong, readonly) MASConstraint *right; @property (nonatomic, strong, readonly) MASConstraint *bottom; @property (nonatomic, strong, readonly) MASConstraint *leading; @property (nonatomic, strong, readonly) MASConstraint *trailing; @property (nonatomic, strong, readonly) MASConstraint *width; @property (nonatomic, strong, readonly) MASConstraint *height; @property (nonatomic, strong, readonly) MASConstraint *centerX; @property (nonatomic, strong, readonly) MASConstraint *centerY; @property (nonatomic, strong, readonly) MASConstraint *baseline;
这些属性与
NSLayoutAttrubute的对照表如下:
二、Masonry使用
Masonry的大部分方法都为
UIView实现了分类,使我们可以十分简单的使用
下面是Masonry添加约束的方法:
/* 添加新约束,只负责新增约束,不能同时存在两条针对于同一对象的约束,否则会报错 */ - (NSArray *)mas_makeConstraints:(void(^)(MASConstraintMaker *make))block; /* 更新原有的约束,针对上面的情况,会更新在block中出现的约束,不会导致出现两个相同约束的情况 */ - (NSArray *)mas_updateConstraints:(void(^)(MASConstraintMaker *make))block; /* 删除之前约���,重新添加约束,会清除之前的所有约束,仅保留最新的约束 */ - (NSArray *)mas_remakeConstraints:(void(^)(MASConstraintMaker *make))block;
上面三个方法不仅只有
UIView可以调用,存有
UIView的
NSArray数组也可以调用,表示遍历数组中所有
UIView进行调用
下面是Block中使用的常见约束语法,[attribute]表示属性,[value]表示值:
/* 属性attribute可以连用,比如top.right.bottom.left 加mas_前缀和没有mas_前缀效果差不多,只是加mas_前缀会对参数装箱, 参数有结构体的时候,需要使用mas_前缀,没有mas_前缀的参数必须为对象 */ /* 数值约束,top对应NSInteger,center对应NSPoint,size对应NSSize */ make.[attribute].mas_equalTo([value]); /* 等于约束,两个view之间比较,注意:没有other.edges的属性,edges对应otherView */ make.[attribute].equalTo(otherView.[attribute]); /* 大于等于约束,两个view之间比较 */ make.[attribute].greaterThanOrEqualTo(otherView.[attribute]); /* 小于等于约束,两个view之间比较 */ make.[attribute].lessThanOrEqualTo(otherView.[attribute]); /* 偏移约束 */ make.[attribute].equalTo(otherView.[attribute]).offset([value]); /* 边界约束,有上、下、左、右边界 */ make.edges.equalTo(otherView).insets(UIEdgeInsetsMake([topValue],[leftValue],[bottomValue],[rightValue])); /* Margin约束 */ make.[attribute].equalTo(otherView.[attribute]Margin);
注意:
添加约束前,必须先把
UIView添加到父视图中,否则会闪退
下面我们通过几个实例来理解:
1. 实例一[基础]:居中显示一个view
- (void)viewDidLoad { [super viewDidLoad]; UIView *sv = [[UIView alloc] init]; sv.backgroundColor = [UIColor blackColor]; //一定要先将view添加到superView上,否则会出错 [self.view addSubview:sv]; //Masonry的autolayout添加约束 __weak ViewController *weakSelf = self; [sv mas_makeConstraints:^(MASConstraintMaker *make) { make.center.equalTo(weakSelf.view);//将sv居中 make.size.mas_equalTo(CGSizeMake(300, 300));//将sv的尺寸设置为(300,300) }]; }
2. 实例二[初级]:让一个view略小于其superView(边距为10)
UIView *sv = [[UIView alloc] init]; sv.backgroundColor = [UIColor blackColor]; //一定要先将view添加到superView上,否则会出错 [self.view addSubview:sv]; //Masonry的autolayout添加约束 __weak ViewController *weakSelf = self; [sv mas_makeConstraints:^(MASConstraintMaker *make) { make.center.equalTo(weakSelf.view);//将sv居中 make.size.mas_equalTo(CGSizeMake(300, 300));//将sv的尺寸设置为(300,300) }]; UIView *sv1 = [[UIView alloc] init]; sv1.backgroundColor = [UIColor redColor]; //一定要先将view添加到superView上,否则会出错 [sv addSubview:sv1]; //Masonry的autolayout添加约束 [sv1 mas_makeConstraints:^(MASConstraintMaker *make) { make.edges.equalTo(sv).with.insets(UIEdgeInsetsMake(10, 10, 10, 10)); /* 等价于 make.top.equalTo(sv).with.offset(10); make.left.equalTo(sv).with.offset(10); make.bottom.equalTo(sv).with.offset(-10); make.right.equalTo(sv).with.offset(-10); */ /* 也等价于 make.top.left.bottom.and.right.equalTo(sv).with.insets(UIEdgeInsetsMake(10, 10, 10, 10)); */ }];
实际上and和with这两个方法什么事情都没做:
- (MASConstraint *)with { return self; } - (MASConstraint *)and { return self; }
3. 实例三[初级]:让两个高度为150的view垂直居中且等宽且等间隔排列,间隔为10(自动计算其宽度)
UIView *sv = [[UIView alloc] init]; sv.backgroundColor = [UIColor blackColor]; //一定要先将view添加到superView上,否则会出错 [self.view addSubview:sv]; //Masonry的autolayout添加约束 __weak ViewController *weakSelf = self; [sv mas_makeConstraints:^(MASConstraintMaker *make) { make.center.equalTo(weakSelf.view);//将sv居中 make.size.mas_equalTo(CGSizeMake(300, 300));//将sv的尺寸设置为(300,300) }]; int padding1 = 10; UIView *leftView = [[UIView alloc] init]; leftView.backgroundColor = [UIColor orangeColor]; [sv addSubview:leftView]; UIView *rightView = [[UIView alloc] init]; rightView.backgroundColor = [UIColor orangeColor]; [sv addSubview:rightView]; //Masonry的autolayout添加约束 [leftView mas_makeConstraints:^(MASConstraintMaker *make) { make.centerY.mas_equalTo(sv.mas_centerY);//中心Y轴和sv中心Y轴相等 make.left.equalTo(sv.mas_left).with.offset(padding1);//左边距离sv的左边界10 make.right.equalTo(rightView.mas_left).with.offset(-padding1);//右边距离rightView的左边界-10 make.height.mas_equalTo(@150);//高度150 make.width.equalTo(rightView);//宽度等于rightView }]; [rightView mas_makeConstraints:^(MASConstraintMaker *make) { make.centerY.mas_equalTo(sv.mas_centerY);//中心Y轴和sv中心Y轴相等 make.left.equalTo(leftView.mas_right).with.offset(padding1);//左边距离leftView的右边界10 make.right.equalTo(sv.mas_right).with.offset(-padding1);//右边距离sv的右边界-10 make.height.mas_equalTo(@150);//高度150 make.width.equalTo(leftView);//宽度等于leftView }];
4. 实例四[中级]:在UIScrollView顺序排列一些view并自动计算contentSize
UIView *sv = [[UIView alloc] init]; sv.backgroundColor = [UIColor blackColor]; //一定要先将view添加到superView上,否则会出错 [self.view addSubview:sv]; //Masonry的autolayout添加约束 __weak ViewController *weakSelf = self; [sv mas_makeConstraints:^(MASConstraintMaker *make) { make.center.equalTo(weakSelf.view);//将sv居中 make.size.mas_equalTo(CGSizeMake(300, 300));//将sv的尺寸设置为(300,300) }]; /* 创建ScrollView */ UIScrollView *scrollView = [[UIScrollView alloc] init]; scrollView.backgroundColor = [UIColor whiteColor]; [sv addSubView:scrollView]; [scrollView mas_makeConstraints:^(MASConstraintMaker *make) { //设置边界约束 make.edges.equalTo(sv).with.insets(UIEdgeInsetsMake(5,5,5,5)); }]; //创建ScrollView子视图容器视图 UIView *container = [[UIView alloc] init]; [scrollView addSubView:container]; //添加container约束 [container mas_makeConstraints:^(MASConstraintMaker *make) { make.edges.equalTo(scrollView);//边界紧贴ScrollView边界 make.width.equalTo(scrollView);//宽度和ScrollView相等 }]; //向container添加多个View int count = 10; UIView *lastView = nil; for(int i = 1;i <= count;++i ){ //创建一个View UIView *subView = [[UIView alloc] init]; [container addSubView:subView]; //颜色随机 subView.backgroundColor = [UIColor colorWithRed:( arc4random() % 256 / 256.0 ) green:( arc4random() % 256 / 256.0 ) blue:( arc4random() % 256 / 256.0 ) alpha:1]; //向subView添加约束 [subView mas_makeConstraints:^(MASConstraintMaker *make) { make.left.and.right.equalTo(container);//左右边界和container紧贴 make.height.mas_equalTo(@(20*i));//高度随i递增 //判断是否有前一个子View if ( lastView ) { //如果有前一个View,上边界和前一个View的下边界紧贴 make.top.mas_equalTo(lastView.mas_bottom); } else { //如果没有前一个View,上边界和container的下边界紧贴 make.top.mas_equalTo(container.mas_top); } }]; //保存前一个View lastView = subView; } //添加container的最后一个约束 [container mas_makeConstraints:^(MASConstraintMaker *make) { //container的下边界和最后一个View的下边界紧贴 make.bottom.equalTo(lastView.mas_bottom); }];
三、Masonry进阶
Masonry为NSArray实现了2个特殊的分类方法:/* 该方法只有存有UIView的NSArray数组可以调用,NSArray里面的UIView必须有共同的spuerView 该方法作用是UIView之间的水平等宽定距约束,或者垂直等高定距约束。 先确定间距,宽度或高度不确定,但相等 axisType只有MASAxisTypeHorizontal(水平间距类型)和MASAxisTypeVertical(垂直间距类型) fixedSpacing是UIView两两之间的间距大小 leadSpacing是第一个UIView距离superView左(或上)边界的间距大小 tailSpacing是最后一个UIView距离superView右(或下)边界的间距大小 数组里的所有UIView水平宽度相等,或者垂直高度相等 */ - (void)mas_distributeViewsAlongAxis:(MASAxisType)axisType withFixedSpacing:(CGFloat)fixedSpacing leadSpacing:(CGFloat)leadSpacing tailSpacing:(CGFloat)tailSpacing; /* 该方法只有存有UIView的NSArray数组可以调用,NSArray里面的UIView必须有共同的spuerView 该方法作用是UIView之间的水平定宽等距约束,或者垂直定高等距约束。 先确定宽度或高度,间距不确定,但相等 axisType只有MASAxisTypeHorizontal(水平间距类型)和MASAxisTypeVertical(垂直间距类型) fixedSpacing是UIView两两之间的间距大小 leadSpacing是第一个UIView距离superView左(或上)边界的间距大小 tailSpacing是最后一个UIView距离superView右(或下)边界的间距大小 数组里的所有UIView间距相等 */ - (void)mas_distributeViewsAlongAxis:(MASAxisType)axisType withFixedItemLength:(CGFloat)fixedItemLength leadSpacing:(CGFloat)leadSpacing tailSpacing:(CGFloat)tailSpacing;
下面是等间距方法的使用实例:
/* 设置水平等宽定距 UIView之间水平间距为20,第一个UIView距离superView左边6, 最后一个UIView距离superView右边7,UIView高度为60,距离顶部40 */ [array mas_distributeViewsAlongAxis:MASAxisTypeHorizontal withFixedSpacing:20 leadSpacing:6 tailSpacing:7]; [array mas_makeConstraints:^(MASConstraintMaker *make) { make.top.equalTo(@40); make.height.equalTo(@60); }];
/* 设置水平定宽等距 所有UIView的宽度为20,第一个UIView距离superView左边6, 最后一个UIView距离superView右边7,UIView高度为60,距离顶部40 */ [array mas_distributeViewsAlongAxis:MASAxisTypeHorizontal withFixedItemLength:20 leadSpacing:6 tailSpacing:7]; [array mas_makeConstraints:^(MASConstraintMaker *make) { make.top.equalTo(@40); make.height.equalTo(@60); }];
有什么问题可以在下方评论区中提出!O(∩_∩)O哈!
相关文章推荐
- iOS深复制和浅复制
- iOS深入学习(Block全面分析)
- iOS开发——响应链(Responder Chain)的深入理解和代码示例
- [置顶] iOS在沙盒Documents中创建文件夹以及获取沙盒路径
- ios 9.0获取用户位置
- 获取用户位置ios8.0以上适配
- ios 获取用户的位置
- iOS模块化之路(一)
- 【代码笔记】iOS-两个滚动条,上下都能滑动
- iOS中NSUserDefaults的用法(轻量级本地数据存储)
- iOS - block
- iOS开发之断点续传原理与实现
- iOS支付宝支付--密钥制作
- WIN8/8.1/10进入BIOS方法图解
- WIN8/8.1/10进入BIOS方法图解
- iOS开发中短信提醒功能详解步骤
- iOS下Date.parse失效的解决方法
- [工具] iOS 单张图片查看器
- [工具] iOS 相机选择器
- [实践]iOS 夜间模式