您的位置:首页 > 其它

蓝牙L2CAP剖析(二)

2016-05-10 17:42 246 查看
关键字:bluetooth 蓝牙协议 HCI剖析 HCI概述 HCI笔记 LMP L2CAP SDP RFCOMM



作者:zhongjun
本着互相学习的目的,来分享此一系列的文章,欢迎转载,请注明作者,尊重版权,谢谢

文章有不当处请指正,共同学习

此系列目前这样打算:

LMP剖析 + 模拟源码:

蓝牙LMP剖析(一)

蓝牙LMP剖析(二)

HCI剖析 + 模拟源码:

蓝牙HCI剖析(一)

蓝牙HCI剖析(二)

蓝牙HCI剖析(三)

L2CAP剖析 + 模拟源码

蓝牙L2CAP剖析(一)

SDP剖析 + 模拟源码(未完成)

rfcomm剖析 + 模拟源码(未完成)

另外可以从蓝牙栏目访问我的CSDN:http://blog.csdn.net/XiaoXiaoPengBo/article/category/5998687

------------------------------------------------------------------------------------------------------------------------------------

华丽分割线,进入正题

------------------------------------------------------------------------------------------------------------------------------------

一,部分代码没有完成,只是模拟一个面向连接的从建立到断开的过程,另外,L2CAP的重点状态机和拆包重组没有模拟

bt_l2cap.h

/*
* This file is part of the L2CAP protocal.
* Data  :20160510
* Author: zhongjun
*
*/

#ifndef BT_L2CAP_H_H
#define BT_L2CAP_H_H

#include "bt_cfg.h"

#ifdef DEBUG_BT_L2CAP
#define DEBUG(x) {printf x;}
#define BT_L2CAP_DEBUG(x) DEBUG(x)
#else
#define BT_L2CAP_DEBUG(x)
#endif
/* L2CAP CHANNEL */
#define L2CAP_SIG_CH 0x0001
#define L2CAP_CONLESS_CH 0x0002

/* L2CAP defaults */
#define L2CAP_DEFAULT_MTU	672
#define L2CAP_DEFAULT_FLUSH_TO	0xFFFF

/* UPPER LAYER PSM */
#define SDP_PSM 0x0001
/* L2CAP command codes */
#define L2CAP_COMMAND_REJ	0x01
#define L2CAP_CONN_REQ		0x02
#define L2CAP_CONN_RSP		0x03
#define L2CAP_CONF_REQ		0x04
#define L2CAP_CONF_RSP		0x05
#define L2CAP_DISCONN_REQ	0x06
#define L2CAP_DISCONN_RSP	0x07
#define L2CAP_ECHO_REQ		0x08
#define L2CAP_ECHO_RSP		0x09
#define L2CAP_INFO_REQ		0x0a
#define L2CAP_INFO_RSP		0x0b

/* connect result */
#define L2CAP_CR_SUCCESS	0x0000
#define L2CAP_CR_PEND		0x0001
#define L2CAP_CR_NOSUP_PSM	0x0002
#define L2CAP_CR_SEC_BLOCK	0x0003
#define L2CAP_CR_NO_RSR		0x0004
/* config result */
#define L2CAP_CONF_SUCCESS	0x0000
#define L2CAP_CONF_UNACCEPT	0x0001
#define L2CAP_CONF_REJECT	0x0002
#define L2CAP_CONF_UNKNOWN	0x0003

/* config option */
#define L2CAP_CONF_MTU		0x01
#define L2CAP_CONF_FLUSH_TO	0x02
#define L2CAP_CONF_QOS		0x03
#define L2CAP_CONF_RFC		0x04
#define L2CAP_CONF_RFC_MODE	0x04

#pragma pack(1)
/* L2CAP structures hdr*/
typedef struct {
uint16_t	len;
uint16_t	cid;
}L2CAP_PDU_HDR_Format;

typedef struct {
L2CAP_PDU_HDR_Format sig_hdr;
uint8_t		code;
uint8_t		ident;
uint16_t	len;
}L2CAP_SIG_HDR_Format;

/* L2CAP structures detail*/
typedef struct {
L2CAP_SIG_HDR_Format com_hdr;
uint16_t	psm;
uint16_t	scid;
}L2CAP_Con_Req;

typedef struct {
L2CAP_SIG_HDR_Format com_hdr;
uint16_t	dst_cid;
uint16_t	src_cid;
uint16_t	result;
uint16_t	status;
}L2CAP_Con_Rsp;

typedef struct {
L2CAP_SIG_HDR_Format com_hdr;
uint16_t	dst_cid;
uint16_t	flags;
uint8_t		data[0];
}L2CAP_Conf_Req;

typedef struct {
L2CAP_SIG_HDR_Format com_hdr;
uint16_t	src_cid;
uint16_t	flags;
uint16_t	result;
uint8_t		data[0];
}L2CAP_Conf_Rsp;

typedef struct {
L2CAP_PDU_HDR_Format com_hdr;
uint8_t		data[0];
}L2CAP_Upper_Layer_data_Format;

typedef struct {
L2CAP_SIG_HDR_Format com_hdr;
uint16_t	dcid;
uint16_t	scid;
}L2CAP_Discon_req;

typedef struct {
L2CAP_SIG_HDR_Format com_hdr;
uint16_t	dcid;
uint16_t	scid;
}L2CAP_Discon_rsp;
#pragma pack()

/* API */
/* send pdu */
int L2CAP_Send_SIG_Con_Req(uint8_t ident,uint16_t psm,uint16_t scid);
int L2CAP_Send_SIG_Conf_Req(uint8_t ident,uint16_t dcid,uint16_t flags,uint8_t *conf_opt,uint8_t opt_len);
int L2CAP_Send_Upper_Layer_data(uint16_t cid,uint8_t *data,uint16_t length);
int L2CAP_Send_SIG_Discon_Req(uint8_t ident,uint16_t dcid,uint16_t scid);
int L2CAP_Send_PDU(uint8_t *PDU,uint32_t length);

/* reve pdu */
int L2CAP_Parse_PDU(uint8_t *PDU,uint32_t length);
int L2CAP_Parse_SIG_Con_Rsp_PDU(uint8_t *PDU,uint32_t length);
int L2CAP_Parse_SIG_Conf_Rsp_PDU(uint8_t *PDU,uint32_t length);
int L2CAP_Parse_SIG_Discon_Rsp_PDU(uint8_t *PDU,uint32_t length);
#endif


bt_l2cap.c

#include "bt_l2cap.h"

int L2CAP_Send_SIG_Con_Req(uint8_t ident,uint16_t psm,uint16_t scid)
{
L2CAP_Con_Req PDU;
PDU.com_hdr.sig_hdr.cid = L2CAP_SIG_CH;
PDU.com_hdr.sig_hdr.len = sizeof(L2CAP_Con_Req) - sizeof(L2CAP_PDU_HDR_Format);

PDU.com_hdr.code = L2CAP_CONN_REQ;
PDU.com_hdr.ident = ident;
PDU.com_hdr.len = sizeof(L2CAP_Con_Req) - sizeof(L2CAP_SIG_HDR_Format);

PDU.psm = psm;
PDU.scid = scid;
L2CAP_Send_PDU((uint8_t *)&PDU,sizeof(L2CAP_Con_Req));
}
int L2CAP_Send_SIG_Conf_Req(uint8_t ident,uint16_t dcid,uint16_t flags,uint8_t *conf_opt,uint8_t opt_len)
{
L2CAP_Conf_Req *PDU = (L2CAP_Conf_Req *)malloc(sizeof(L2CAP_Conf_Req) + opt_len);
(PDU->com_hdr).sig_hdr.cid = L2CAP_SIG_CH;
(PDU->com_hdr).sig_hdr.len = sizeof(L2CAP_Conf_Req) - sizeof(L2CAP_PDU_HDR_Format) + opt_len;

(PDU->com_hdr).code = L2CAP_CONF_REQ;
(PDU->com_hdr).ident = ident;
(PDU->com_hdr).len = sizeof(L2CAP_Conf_Req) - sizeof(L2CAP_SIG_HDR_Format) + opt_len;

PDU->dst_cid = dcid;
PDU->flags = flags;
memcpy(PDU->data,conf_opt,opt_len);

L2CAP_Send_PDU(PDU,sizeof(L2CAP_Conf_Req) + opt_len);
}

int L2CAP_Send_Upper_Layer_data(uint16_t cid,uint8_t *data,uint16_t length)
{
L2CAP_Upper_Layer_data_Format *PDU = (L2CAP_Upper_Layer_data_Format *)malloc(sizeof(L2CAP_Upper_Layer_data_Format) + length);
(PDU->com_hdr).cid = cid;
(PDU->com_hdr).len = sizeof(L2CAP_Upper_Layer_data_Format) + length;

memcpy(PDU->data,data,length);
L2CAP_Send_PDU(PDU,sizeof(L2CAP_Upper_Layer_data_Format) + length);
}

int L2CAP_Send_SIG_Discon_Req(uint8_t ident,uint16_t dcid,uint16_t scid)
{
L2CAP_Discon_req PDU;
PDU.com_hdr.sig_hdr.cid = L2CAP_SIG_CH;
PDU.com_hdr.sig_hdr.len = sizeof(L2CAP_Discon_req) - sizeof(L2CAP_PDU_HDR_Format);

PDU.com_hdr.code = L2CAP_DISCONN_REQ;
PDU.com_hdr.ident = ident;
PDU.com_hdr.len = sizeof(L2CAP_Con_Req) - sizeof(L2CAP_SIG_HDR_Format);

PDU.dcid = dcid;
PDU.scid = scid;
L2CAP_Send_PDU((uint8_t *)&PDU,sizeof(L2CAP_Con_Req));
}
int L2CAP_Send_PDU(uint8_t *PDU,uint32_t length)
{
int index = 0;
BT_L2CAP_DEBUG((" >> Send L2CAP REQ PDU:"));
for(index = 0; index < length; index++)
{
BT_L2CAP_DEBUG(("0x%02x ",PDU[index]));
}
BT_L2CAP_DEBUG(("\n"));
}

int L2CAP_Parse_PDU(uint8_t *PDU,uint32_t length)
{
L2CAP_PDU_HDR_Format *TMP_PDU = (L2CAP_PDU_HDR_Format *)PDU;
if((TMP_PDU->cid) == L2CAP_SIG_CH)
{
uint8_t tmp_code;
L2CAP_SIG_HDR_Format *pdu = (L2CAP_SIG_HDR_Format *)PDU;
BT_L2CAP_DEBUG(("SIG PDU\n"));
tmp_code = pdu->code;
switch(tmp_code)
{
case L2CAP_CONN_RSP:
{
BT_L2CAP_DEBUG(("L2CAP_CONN_RSP\n"));
L2CAP_Parse_SIG_Con_Rsp_PDU(PDU,length);
break;
}
case L2CAP_CONF_RSP:
{
BT_L2CAP_DEBUG(("L2CAP_CONF_RSP\n"));
L2CAP_Parse_SIG_Conf_Rsp_PDU(PDU,length);
break;
}
case L2CAP_DISCONN_RSP:
{
BT_L2CAP_DEBUG(("L2CAP_DISCONN_RSP\n"));
L2CAP_Parse_SIG_Discon_Rsp_PDU(PDU,length);
break;
}
default:
{
break;
}
}

}
else
{
//TODO
}
}

int L2CAP_Parse_SIG_Con_Rsp_PDU(uint8_t *PDU,uint32_t length)
{
L2CAP_Con_Rsp *tmp_pdu = (L2CAP_Con_Rsp *)PDU;
if(tmp_pdu->result == L2CAP_CR_SUCCESS)
{
BT_L2CAP_DEBUG(("connect successful\n"));
}
else if(tmp_pdu->result == L2CAP_CR_PEND)
{
BT_L2CAP_DEBUG(("connect pending\n"));
}
}

int L2CAP_Parse_SIG_Conf_Rsp_PDU(uint8_t *PDU,uint32_t length)
{
L2CAP_Conf_Rsp *tmp_pdu = (L2CAP_Conf_Rsp *)PDU;
if(tmp_pdu->result == L2CAP_CONF_SUCCESS)
{
BT_L2CAP_DEBUG(("config successful\n"));
}
else if(tmp_pdu->result == L2CAP_CONF_UNACCEPT)
{
BT_L2CAP_DEBUG(("config unaccept\n"));
}
}

int L2CAP_Parse_SIG_Discon_Rsp_PDU(uint8_t *PDU,uint32_t length)
{

}


bt_cfg.h

#ifndef BT_LMP_CFG_H
#define BT_LMP_CFG_H

#include <stdlib.h>
#include <stdio.h>
#include <string.h>

#define DEBUG_BT_L2CAP

typedef unsigned char uint8_t;
typedef unsigned short uint16_t;
typedef unsigned int uint32_t;

typedef  char int8_t;
typedef  short int16_t;
typedef  int int32_t;

#undef NULL
#if defined(__cplusplus)
#define NULL 0
#else
#define NULL ((void *)0)
#endif

#endif


main.c

#include <stdio.h>
#include "bt_l2cap.h"

int main()
{
uint8_t con_rsp_pdu[] = {0x0C,0x00,0x01,0x00,0x03,0x79,0x08,0x00,0x06,0x08,0x40,0x00,0x00,0x00,0x00,0x00};
uint8_t conf_option[] = {0x01,0x02,0xF4,0x01,0x02,0x02,0xFF,0xFF};
uint8_t conf_rsp_pdu[] = {0x0E,0x00,0x01,0x00,0x05,0x7A,0x0A,0x00,0x40,0x00,0x00,0x00,0x00,0x00,0x01,0x02,0xF4,0x01};
uint8_t upper_layer_data[] = {0x1,0x1,0x1,0x1,0x1,0x1};
L2CAP_Send_SIG_Con_Req(0x79,SDP_PSM,0x40);
L2CAP_Parse_PDU(con_rsp_pdu,sizeof(con_rsp_pdu));

L2CAP_Send_SIG_Conf_Req(0x79,0x0806,0x0,conf_option,sizeof(conf_option));
L2CAP_Parse_PDU(conf_rsp_pdu,sizeof(conf_rsp_pdu));

L2CAP_Send_Upper_Layer_data(0x40,upper_layer_data,sizeof(upper_layer_data));

L2CAP_Send_SIG_Discon_Req(0x79,0x40,0x0806);
}
内容来自用户分享和网络整理,不保证内容的准确性,如有侵权内容,可联系管理员处理 点击这里给我发消息
标签: