Centos6.5 或6.x 5.x搭建smokeping
2016-04-26 14:11
483 查看
1.准备工作 关掉防火墙和SELINUX 2.安装rpmforge# yum install wget (****CentOS 6请使用这个库****) wget http://pkgs.repoforge.org/rpmforge-release/rpmforge-release-0.5.2-2.el6.rf.x86_64.rpmrpm -Uvh rpmforge-release-0.5.2-2.el6.rf.x86_64.rpm (****CentOS 5请使用这个库****)wget http://pkgs.repoforge.org/rpmforge-release/rpmforge-release-0.5.2-2.el5.rf.x86_64.rpmrpm -Uvh rpmforge-release-0.5.2-2.el5.rf.x86_64.rpm 3.安装需要的软件包# yum install mod_fcgid httpd httpd-devel rrdtool fping wget curl bind-utils gcc make# yum install perl perl-Net-Telnet perl-Net-DNS perl-LDAP perl-libwww-perl perl-RadiusPerl perl-IO-Socket-SSL perl-Socket6 perl-CGI-SpeedyCGI perl-FCGI perl-RRD-Simple perl-CGI-SpeedCGI perl-ExtUtils-MakeMaker 4.安装smokeping# wget http://oss.oetiker.ch/smokeping/pub/smokeping-2.6.8.tar.gz# tar -zxvf smokeping-2.6.8.tar.gz -C /opt/
# mkdir /opt/smokeping
# cd /opt/smokeping-2.6.8/setup
# ./build-perl-modules.sh
# cp -r ../thirdparty /opt/smokeping/
# cd ..
# ./configure –prefix=/opt/smokeping# make install 5.创建丢失的文件夹# cd /opt/smokeping
# mkdir data var cache 6.添加smokeping启动/停止脚本# wget http://new.wedebugyou.com/static/smokeping_start_stop.txt
# mv smokeping_start_stop.txt /etc/init.d/smokeping
# chmod 755 /etc/init.d/smokeping 7.重命名配置文件和更改安全# cd /opt/smokeping/etc/
# for foo in *.dist; do cp $foo `basename $foo .dist`; done
# chmod 600 /opt/smokeping/etc/smokeping_secrets.dist 8.更改默认配置文件 # vim config(“*”号范围离得为配置文件样例)*************************************************************************** General ***
owner = Nolan Guo
contact = guoyingce@originpoker.com
# mailhost = my.mail.host
# sendmail = /usr/sbin/sendmail
# NOTE: do not put the Image Cache below cgi-bin
# since all files under cgi-bin will be executed ... this is not
# good for images.
imgcache = /opt/smokeping/cache
imgurl = cache
datadir = /opt/smokeping/data
piddir = /opt/smokeping/var
cgiurl = http://*****/smokeping.cgi smokemail = /opt/smokeping/etc/smokemail.dist
tmail = /opt/smokeping/etc/tmail.dist
# specify this to get syslog logging
syslogfacility = local0
# each probe is now run in its own process
# disable this to revert to the old behaviour
# concurrentprobes = no
*** Alerts ***
to = alertee@address.somewhere
from = smokealert@company.xy
+someloss
type = loss
# in percent
pattern = >0%,*12*,>0%,*12*,>0%
comment = loss 3 times in a row
*** Database ***
step = 300
pings = 20
# consfn mrhb steps total
AVERAGE 0.5 1 1008
AVERAGE 0.5 12 4320
MIN 0.5 12 4320
MAX 0.5 12 4320
AVERAGE 0.5 144 720
MAX 0.5 144 720
MIN 0.5 144 720
*** Presentation ***
template = /opt/smokeping/etc/basepage.html.dist
+ charts
menu = Charts
title = The most interesting destinations
++ stddev
sorter = StdDev(entries=>4)
title = Top Standard Deviation
menu = Std Deviation
format = Standard Deviation %f
++ max
sorter = Max(entries=>5)
title = Top Max Roundtrip Time
menu = by Max
format = Max Roundtrip Time %f seconds
++ loss
sorter = Loss(entries=>5)
title = Top Packet Loss
menu = Loss
format = Packets Lost %f
++ median
sorter = Median(entries=>5)
title = Top Median Roundtrip Time
menu = by Median
format = Median RTT %f seconds
+ overview
width = 600
height = 50
range = 10h
+ detail
width = 600
height = 200
unison_tolerance = 2
"Last 3 Hours" 3h
"Last 30 Hours" 30h
"Last 10 Days" 10d
"Last 400 Days" 400d
#+ hierarchies
#++ owner
#title = Host Owner
#++ owner
#title = Host Owner
#++ location
#title = Location
*** Probes ***
+ FPing
binary = /usr/sbin/fping
+ Curl
binary = /usr/bin/curl
urlformat = https://%host%/ pings = 3
*** Targets ***
probe = FPing
menu = Top
title = Network Latency Grapher
remark = Welcome to the SmokePing website of Originpoker Company. \
Here you will learn all about the latency of our network.
************************************************************************ 9.smokeping到Web服务器的配置# cd /opt/smokeping
# ln -s /opt/smokeping/cache /opt/smokeping/htdocs/cache
# chown -R apache cache
# chown -R apache data (添加这些行为的文件/ etc /服务器/ conf.d/smokeping.conf)ScriptAlias/smokeping/smokeping.cgi /opt/smokeping/htdocs/smokeping.fcgi.distAlias /smokeping /opt/smokeping/htdocs<Directory “/opt/smokeping/htdocs”>
Options FollowSymLinks
</Directory> 10.启动服务# /etc/init.d/smokeping start
# /etc/init.d/httpd start
# mkdir /opt/smokeping
# cd /opt/smokeping-2.6.8/setup
# ./build-perl-modules.sh
# cp -r ../thirdparty /opt/smokeping/
# cd ..
# ./configure –prefix=/opt/smokeping# make install 5.创建丢失的文件夹# cd /opt/smokeping
# mkdir data var cache 6.添加smokeping启动/停止脚本# wget http://new.wedebugyou.com/static/smokeping_start_stop.txt
# mv smokeping_start_stop.txt /etc/init.d/smokeping
# chmod 755 /etc/init.d/smokeping 7.重命名配置文件和更改安全# cd /opt/smokeping/etc/
# for foo in *.dist; do cp $foo `basename $foo .dist`; done
# chmod 600 /opt/smokeping/etc/smokeping_secrets.dist 8.更改默认配置文件 # vim config(“*”号范围离得为配置文件样例)*************************************************************************** General ***
owner = Nolan Guo
contact = guoyingce@originpoker.com
# mailhost = my.mail.host
# sendmail = /usr/sbin/sendmail
# NOTE: do not put the Image Cache below cgi-bin
# since all files under cgi-bin will be executed ... this is not
# good for images.
imgcache = /opt/smokeping/cache
imgurl = cache
datadir = /opt/smokeping/data
piddir = /opt/smokeping/var
cgiurl = http://*****/smokeping.cgi smokemail = /opt/smokeping/etc/smokemail.dist
tmail = /opt/smokeping/etc/tmail.dist
# specify this to get syslog logging
syslogfacility = local0
# each probe is now run in its own process
# disable this to revert to the old behaviour
# concurrentprobes = no
*** Alerts ***
to = alertee@address.somewhere
from = smokealert@company.xy
+someloss
type = loss
# in percent
pattern = >0%,*12*,>0%,*12*,>0%
comment = loss 3 times in a row
*** Database ***
step = 300
pings = 20
# consfn mrhb steps total
AVERAGE 0.5 1 1008
AVERAGE 0.5 12 4320
MIN 0.5 12 4320
MAX 0.5 12 4320
AVERAGE 0.5 144 720
MAX 0.5 144 720
MIN 0.5 144 720
*** Presentation ***
template = /opt/smokeping/etc/basepage.html.dist
+ charts
menu = Charts
title = The most interesting destinations
++ stddev
sorter = StdDev(entries=>4)
title = Top Standard Deviation
menu = Std Deviation
format = Standard Deviation %f
++ max
sorter = Max(entries=>5)
title = Top Max Roundtrip Time
menu = by Max
format = Max Roundtrip Time %f seconds
++ loss
sorter = Loss(entries=>5)
title = Top Packet Loss
menu = Loss
format = Packets Lost %f
++ median
sorter = Median(entries=>5)
title = Top Median Roundtrip Time
menu = by Median
format = Median RTT %f seconds
+ overview
width = 600
height = 50
range = 10h
+ detail
width = 600
height = 200
unison_tolerance = 2
"Last 3 Hours" 3h
"Last 30 Hours" 30h
"Last 10 Days" 10d
"Last 400 Days" 400d
#+ hierarchies
#++ owner
#title = Host Owner
#++ owner
#title = Host Owner
#++ location
#title = Location
*** Probes ***
+ FPing
binary = /usr/sbin/fping
+ Curl
binary = /usr/bin/curl
urlformat = https://%host%/ pings = 3
*** Targets ***
probe = FPing
menu = Top
title = Network Latency Grapher
remark = Welcome to the SmokePing website of Originpoker Company. \
Here you will learn all about the latency of our network.
************************************************************************ 9.smokeping到Web服务器的配置# cd /opt/smokeping
# ln -s /opt/smokeping/cache /opt/smokeping/htdocs/cache
# chown -R apache cache
# chown -R apache data (添加这些行为的文件/ etc /服务器/ conf.d/smokeping.conf)ScriptAlias/smokeping/smokeping.cgi /opt/smokeping/htdocs/smokeping.fcgi.distAlias /smokeping /opt/smokeping/htdocs<Directory “/opt/smokeping/htdocs”>
Options FollowSymLinks
</Directory> 10.启动服务# /etc/init.d/smokeping start
# /etc/init.d/httpd start
相关文章推荐
- Android之使用Http协议实现文件上传功能
- mysql集群之MMM简单搭建
- 通晓网络测试常用命令
- Nodejs学习笔记之测试驱动
- 可以测试javascript运行效果的代码
- 使用php测试硬盘写入速度示例
- python 测试实现方法
- 如何测试端口通不通(四种方法)
- 举例详解PHP脚本的测试方法
- 使用Jasmine和Karma对AngularJS页面程序进行测试
- Php-Redis安装测试笔记
- mysql压力测试脚本实例
- JavaScript 组件之旅(四):测试 JavaScript 组件
- js简单网速测试方法完整实例
- Android触屏测试实例代码
- 解析libcurl在android下的移植、编译与测试
- 几个比较实用的JavaScript 测试及效验工具
- Java中对AtomicInteger和int值在多线程下递增操作的测试
- Python实现测试磁盘性能的方法
- python自动化测试实例解析