蓝牙地址

以下是截取 core 4.2片段：

Each Bluetooth device shall be allocated a unique 48-bit Bluetooth device

address (BD_ADDR). This address shall be obtained from the IEEE

Registration Authority. The address shall be created in accordance with section

9.2 ("48-bit universal LAN MAC addresses") of the IEEE802-2001 standard

(http://standards.ieee.org/findstds/standard/802-2001.html)and using a valid

Organizationally Unique Identifier (OUI) obtained fromthe IEEE Registration

Authority (see http://standards.ieee.org/regauth/oui/forms/and sections 9 and

9.1 of the IEEE 802-2001 specification). The LAP and UAP form the significant

part of the BD_ADDR.The bit pattern in Figure 1.5is an example BD_ADDR.



The BD_ADDR may take any values except the 64 reserved LAP values for

general and dedicated inquiries (see Section 1.2.1 on page 69).

1.2.1 Reserved Addresses

A block of 64 contiguous LAPs is reserved for inquiry operations; one LAP

common to all devices is reserved for general inquiry, the remaining 63 LAPs

are reserved for dedicated inquiry of specific classes of devices (see Assigned

Numbers). The same LAP values are used regardless of the contents of UAP

and NAP. Consequently, none ofthese LAPs can be partof a user BD_ADDR.

The reserved LAP addresses are 0x9E8B00-0x9E8B3F. The general inquiry

LAP is 0x9E8B33. All addresses have the LSB at the rightmost position,

hexadecimal notation. The default check initialization (DCI) is used as the UAP

whenever one of the reserved LAP addresses is used.The DCI is defined to be

0x00 (hexadecimal).