MyBatis多数据源配置(读写分离)
2016-03-16 15:12
169 查看
原文:http://blog.csdn.net/isea533/article/details/46815385
MyBatis多数据源配置(读写分离)首先说明,本文的配置使用的最直接的方式,实际用起来可能会很麻烦。
实际应用中可能存在多种结合的情况,你可以理解本文的含义,不要死板的使用。
多数据源的可能情况
1.主从
通常是MySql一主多从的情况,本文的例子就是主从的情况,但是只有两个数据源,所以采用直接配置不会太麻烦,但是不利于后续扩展,主要是作为一个例子来说明,实际操作请慎重考虑。针对这种情况,一个更好的解决方法可以参考(本人没有实际尝试过):
还有一个通过Spring
AbstractRoutingDataSource路由接口的方式:
2.分库
当业务独立性强,数据量大的时候的,为了提高并发,可能会对表进行分库,分库后,每一个数据库都需要配置一个数据源。这种情况可以参考本文,但是需要注意每一个数据库对应的Mapper要在不同的包下方便区分和配置。
另外分库的情况下也会存在主从的情况,如果你的数据库从库过多,就参考上面提供的方法,或者寻找其他方式解决。
Mapper分包
分库的情况下,不同的数据库的Mapper一定放在不同的包下。主从的情况下,同一个Mapper会同时存在读写的情况,创建两个并不合适,使用同一个即可。但是这种情况下需要注意,Spring对Mapper自动生成的名字是相同的,而且类型也相同,这是就不能直接注入
Mapper接口。需要通过
SqlSession来解决。
Spring基础配置
applicationContext.xml
<beans xmlns="http://www.springframework.org/schema/beans" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:context="http://www.springframework.org/schema/context" xmlns:aop="http://www.springframework.org/schema/aop" xsi:schemaLocation="http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans.xsd http://www.springframework.org/schema/context http://www.springframework.org/schema/context/spring-context.xsd http://www.springframework.org/schema/aop http://www.springframework.org/schema/aop/spring-aop.xsd"> <context:component-scan base-package="com.isea533.mybatis.service"/> <context:property-placeholder location="classpath:config.properties"/> <aop:aspectj-autoproxy/> <import resource="spring-datasource-master.xml"/> <import resource="spring-datasource-slave.xml"/> </beans>1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
[/code]这个文件,主要是引入了
spring-datasource-master.xml和
spring-datasource-slave.xml。
spring-datasource-master.xml
<beans xmlns="http://www.springframework.org/schema/beans" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:tx="http://www.springframework.org/schema/tx" xmlns:aop="http://www.springframework.org/schema/aop" xsi:schemaLocation="http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans.xsd http://www.springframework.org/schema/tx http://www.springframework.org/schema/tx/spring-tx.xsd http://www.springframework.org/schema/aop http://www.springframework.org/schema/aop/spring-aop.xsd"> <bean id="dataSourceMaster" class="com.alibaba.druid.pool.DruidDataSource" init-method="init" destroy-method="close"> <property name="driverClassName" value="${master.jdbc.driverClass}"/> <property name="url" value="${master.jdbc.url}"/> <property name="username" value="${master.jdbc.user}"/> <property name="password" value="${master.jdbc.password}"/> <property name="filters" value="stat"/> <property name="maxActive" value="20"/> <property name="initialSize" value="1"/> <property name="maxWait" value="60000"/> <property name="minIdle" value="1"/> <property name="timeBetweenEvictionRunsMillis" value="60000"/> <property name="minEvictableIdleTimeMillis" value="300000"/> <property name="validationQuery" value="SELECT 'x'"/> <property name="testWhileIdle" value="true"/> <property name="testOnBorrow" value="false"/> <property name="testOnReturn" value="false"/> </bean> <bean id="sqlSessionFactory1" class="org.mybatis.spring.SqlSessionFactoryBean"> <property name="dataSource" ref="dataSourceMaster"/> <property name="mapperLocations"> <array> <value>classpath:mapper/*.xml</value> </array> </property> </bean> <bean class="org.mybatis.spring.mapper.MapperScannerConfigurer"> <property name="basePackage" value="com.isea533.mybatis.mapper"/> <property name="sqlSessionFactoryBeanName" value="sqlSessionFactory1"/> </bean> <bean id="sqlSessionMaster" class="org.mybatis.spring.SqlSessionTemplate" scope="prototype"> <constructor-arg index="0" ref="sqlSessionFactory1"/> </bean> <aop:config> <aop:pointcut id="appService" expression="execution(* com.isea533.mybatis.service..*Service*.*(..))"/> <aop:advisor advice-ref="txAdvice1" pointcut-ref="appService"/> </aop:config> <tx:advice id="txAdvice1" transaction-manager="transactionManager1"> <tx:attributes> <tx:method name="select*" read-only="true"/> <tx:method name="find*" read-only="true"/> <tx:method name="get*" read-only="true"/> <tx:method name="*"/> </tx:attributes> </tx:advice> <bean id="transactionManager1" class="org.springframework.jdbc.datasource.DataSourceTransactionManager"> <property name="dataSource" ref="dataSourceMaster"/> </bean> </beans>1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
[/code]
spring-datasource-slave.xml
和master区别不大,主要是
id名字和数据源配置有区别。
<beans xmlns="http://www.springframework.org/schema/beans" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:tx="http://www.springframework.org/schema/tx" xmlns:aop="http://www.springframework.org/schema/aop" xsi:schemaLocation="http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans.xsd http://www.springframework.org/schema/tx http://www.springframework.org/schema/tx/spring-tx.xsd http://www.springframework.org/schema/aop http://www.springframework.org/schema/aop/spring-aop.xsd"> <bean id="dataSourceSlave" class="com.alibaba.druid.pool.DruidDataSource" init-method="init" destroy-method="close"> <property name="driverClassName" value="${slave.jdbc.driverClass}"/> <property name="url" value="${slave.jdbc.url}"/> <property name="username" value="${slave.jdbc.user}"/> <property name="password" value="${slave.jdbc.password}"/> <property name="filters" value="stat"/> <property name="maxActive" value="20"/> <property name="initialSize" value="1"/> <property name="maxWait" value="60000"/> <property name="minIdle" value="1"/> <property name="timeBetweenEvictionRunsMillis" value="60000"/> <property name="minEvictableIdleTimeMillis" value="300000"/> <property name="validationQuery" value="SELECT 'x'"/> <property name="testWhileIdle" value="true"/> <property name="testOnBorrow" value="false"/> <property name="testOnReturn" value="false"/> </bean> <bean id="sqlSessionFactory2" class="org.mybatis.spring.SqlSessionFactoryBean"> <property name="dataSource" ref="dataSourceSlave"/> <property name="mapperLocations"> <array> <value>classpath:mapper/*.xml</value> </array> </property> </bean> <bean class="org.mybatis.spring.mapper.MapperScannerConfigurer"> <property name="basePackage" value="com.isea533.mybatis.mapper"/> <property name="sqlSessionFactoryBeanName" value="sqlSessionFactory2"/> </bean> <bean id="sqlSessionSlave" class="org.mybatis.spring.SqlSessionTemplate" scope="prototype"> <constructor-arg index="0" ref="sqlSessionFactory2"/> </bean> <aop:config> <aop:pointcut id="appService" expression="execution(* com.isea533.mybatis.service..*Service*.*(..))"/> <aop:advisor advice-ref="txAdvice2" pointcut-ref="appService"/> </aop:config> <tx:advice id="txAdvice2" transaction-manager="transactionManager2"> <tx:attributes> <tx:method name="*" read-only="true"/> </tx:attributes> </tx:advice> <bean id="transactionManager2" class="org.springframework.jdbc.datasource.DataSourceTransactionManager"> <property name="dataSource" ref="dataSourceSlave"/> </bean> </beans>1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
[/code]这里需要注意
<tx:method name="*" read-only="true"/>是只读的。如果不是从库,可以按主库进行配置。
在下面代码中:
<bean class="org.mybatis.spring.mapper.MapperScannerConfigurer"> <property name="basePackage" value="com.isea533.mybatis.mapper"/> <property name="sqlSessionFactoryBeanName" value="sqlSessionFactory2"/> </bean>1
2
3
4
[/code]必须通过
sqlSessionFactoryBeanName来指定不同的
sqlSessionFactory。
config.properties
# 数据库配置 - Master master.jdbc.driverClass = com.mysql.jdbc.Driver master.jdbc.url = jdbc:mysql://192.168.1.11:3306/test master.jdbc.user = root master.jdbc.password = jj # - Slave slave.jdbc.driverClass = com.mysql.jdbc.Driver slave.jdbc.url = jdbc:mysql://192.168.1.22:3306/test slave.jdbc.user = root slave.jdbc.password = jj1
2
3
4
5
6
7
8
9
10
11
[/code]
使用Mapper
这里是针对主从的情况进行设置的,两个配置扫描的Mapper是一样的,所以没法直接注入,需要通过下面的麻烦方式注入。
@Service public class DemoService { private CountryMapper writeMapper; private CountryMapper readMapper; @Resource(name = "sqlSessionMaster") public void setWriteMapper(SqlSession sqlSession) { this.writeMapper = sqlSession.getMapper(CountryMapper.class); } @Resource(name = "sqlSessionSlave") public void setReadMapper(SqlSession sqlSession) { this.readMapper = sqlSession.getMapper(CountryMapper.class); } public int save(Country country){ return writeMapper.insert(country); } public List<Country> selectPage(int pageNum, int pageSize) { PageHelper.startPage(pageNum, pageSize); return readMapper.select(null); } }1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
[/code]因为
sqlSession能通过
name区分开,所以这里从
sqlSession获取
Mapper。
另外如果需要考虑在同一个事务中写读的时候,需要使用相同的
writeMapper,这样在读的时候,才能获取事务中的最新数据。
以上是主从的情况。
在分库的情况时,由于不同Mapper在不同的包下,所以可以直接使用
@Resource或者
@Autowired注入
Mapper,不需要通过
sqlSession获取。
本篇文章,只是一个多数据源的参考,实际应用时,请根据自己的情况进行考虑。
后续,我会利用业余时间,在本文和上面两个相关链接的基础上,针对MySql多数据源,尝试开发可以自动切换数据源的插件,因为我对这方面的实际应用不是很熟,所以欢迎大家留言分享自己的解决方案,对这些了解的越多,就越有可能开发出通用的数据源切换插件。
顶3
相关文章推荐
- ext2文件系统源代码之fsync.c
- Android Studio Log
- Activity访问Service内部方法
- 文本处理工具之sort,uniq实例详解
- DB2 CLP使用
- 31. Next Permutation LeetCode
- Beyond Compare3注册码 各版本都有
- C++多态20160214
- jQuery EasyUI DataGrid Checkbox 数据设定与取值
- ASP.NET小札(二)--HttpContext(请求上下文对象)
- WebView上实现Java与JavaScript交互
- ext2文件系统源代码之file.c
- 【bzoj1492】[NOI2007]货币兑换Cash 斜率优化+set+凸包
- 复制图像打水印
- ios 开发过程中遇到的一些需要注意的地方
- Hashtable和HashMap类 Hashtable的方法是同步的,而HashMap的方法不是
- [疯狂Java]多线程:进程和线程的概念
- Java的string类为什么是不可变的
- 抛开react,如何理解virtual dom和immutability
- 对象池方案总结