硬盘管理命令smartctl

背景：同事在换硬盘到主机后，检查是否把硬盘放在正确的位置，用smartctl命令查看序列号；

命令：smartctl -a /dev/sda

gg0112:~ # smartctl -a /dev/sda
smartctl 5.39 2008-10-24 22:33 [x86_64-suse-linux-gnu] (openSUSE RPM)
Copyright (C) 2002-8 by Bruce Allen, http://smartmontools.sourceforge.net 
Device: SEAGATE  ST9146803SS      Version: 0006         #硬件厂商
Serial number: 6SD2A3ZZ0000B127LJJM                     #硬盘序列号
Device type: disk
Transport protocol: SAS                                 #接口类型
Local Time is: Fri Mar  4 16:58:30 2016 CST
Device supports SMART and is Enabled                    #是否支持smart管理，有的不支持
Temperature Warning Enabled
SMART Health Status: OK                                  #健康状态ok
Current Drive Temperature:     21 C                       #当前温度
Drive Trip Temperature:        68 C                       #此温度是啥？有待考证
Elements in grown defect list: 0
Vendor (Seagate) cache information
Blocks sent to initiator = 1044970503
Blocks received from initiator = 2476401867
Blocks read from cache and sent to initiator = 106869375
Number of read and write commands whose size <= segment size = 364621421
Number of read and write commands whose size > segment size = 0
Vendor (Seagate/Hitachi) factory information
number of hours powered up = 37638.07
number of minutes until next internal SMART test = 54

Error counter log:
Errors Corrected by           Total   Correction     Gigabytes    Total
ECC          rereads/    errors   algorithm      processed    uncorrected
fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:   15099690        0         0  15099690   15099690       2734.048           0
write:         0        0         0         0          0      71719.613           0
verify:    10434        0         0     10434      10434          0.000           0

Non-medium error count:        0

[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
No self-tests have been logged
Long (extended) Self Test duration: 3600 seconds [60.0 minutes]

以上是在gg0112节点上的使用情况；

用法：smartctl -a /dev/sda |grep Seri —直接查看硬盘序列号；

里面还可以查看硬盘生产厂家、接口类型、温度等参数；

不是所有系统默认安装了这个管理工具，可以查看一下：

gg0112:~ # rpm -qa |grep smart

smartmontools-5.38.0.20081027-2.14

若出现：Device does not support SMART，则说明硬盘不支持（这是在虚拟机里测试的，故不支持）；

以后遇到新问题，再持续更新。