详细介绍Ubuntu网络配置方法
2016-02-25 18:18
741 查看
文章主要介绍Ubuntu网络配置,希望能让Linux新手学习参考。更好使用Ubuntu。更有效的学习Ubuntu的基础知识。
Ubuntu网络配置例如:
(1) 配置eth0的IP地址, 同时激活该设备。 #ifconfig eth0 192.168.1.10 netmask 255.255.255.0 up (2) 配置eth0别名设备eth0:1的IP地址,并添加路由。 #ifconfig eth0 192.168.1.3 #route add –host 192.168.1.3 dLINUX下的网络配置命令是ifconfig类似于WINDOWS命令行中的ipconfig。可以使用ifconfig命令来配置并查看网络接口的配置情况。
1、如:
(1) 配置eth0的IP地址, 同时激活该设备。
#ifconfig eth0 192.168.1.10 netmask 255.255.255.0 up
(2) 配置eth0别名设备eth0:1的IP地址,并添加路由。
#ifconfig eth0 192.168.1.3
#route add –host 192.168.1.3 dev eth0:1
(3) 激活设备。
#ifconfig eth0 up
(4) 禁用设备。
#ifconfig eth0 down
(5) 查看指定的网络接口的配置。
#ifconfig eth0
(6) 查看所有的网络接口配置。
#ifconfig
2、 route
可以使用route命令来配置并查看内核路由表的配置情况。
例如:
(1) 添加到主机的路由。
#route add –host 192.168.1.2 dev eth0:0
#route add –host 10.20.30.148 gw 10.20.30.40
(2) 添加到网络的路由。
#route add –net 10.20.30.40 netmask 255.255.255.248 eth0
#route add –net 10.20.30.48 netmask 255.255.255.248 gw 10.20.30.41
#route add –net 192.168.1.0/24 eth1
(3) 添加默认网关。
#route add default gw 192.168.1.1
(4) 查看内核路由表的配置。
#route
(5)删除路由。
#route del –host 192.168.1.2 dev eth0:0
#route del –host 10.20.30.148 gw 10.20.30.40
#route del –net 10.20.30.40 netmask 255.255.255.248 eth0
#route del –net 10.20.30.48 netmask 255.255.255.248 gw 10.20.30.41
#route del –net 192.168.1.0/24 eth1
#route del default gw 192.168.1.1
对于1和2两点可使用下面的语句实现:
Ifconfig eth0 172.16.19.71 netmask 255.255.255.0
Route 0.0.0.0 gw 172.16.19.254
Service network restart
3、 traceroute
可以使用traceroute命令显示数据包到达目的主机所经过的路由。
例如:
#traceroute x
4、 ping
可以使用ping 命令来测试网络的连通性。
例如:
#ping x
#ping –c 4 192.168.1.12
5、 netstat
可以使用netstat命令来显示网络状态信息。
例如:
(1) 显示网络接口状态信息。
#netstat –i
(2) 显示所有监控中的服务器的Socket和正使用Socket的程序信息。
#netstat –lpe
(3) 显示内核路由表信息。
#netstat –r
#netstat –nr
(4) 显示TCP/UDP传输协议的连接状态。
#netstat –t
#netstat –u
6、 hostname
可以使用hostname命令来更改主机名。例如;
#hostname myhost
7、 arp
可以使用arp命令来配置并查看arp缓存。例如:
(1) 查看arp缓存。
#arp
(2) 添加一个IP地址和MAC地址的对应记录。
#arp –s 192.168.33.15 00:60:08:27:CE:B2
(3) 删除一个IP地址和MAC地址的对应缓存记录。
#arp –d192.168.33.15
Ubuntu命令行下的网络配置
编辑 /etc/network/interface文件如下
先添加
auto lo
iface lo inet loopback
auto eth0
如果是自动获取ip,添加
iface eth0 inet dhcp
如果是手动配置ip,添加
iface eth0 inet static
address xxx.xxx.xxx.xxx
netmask xxx.xxx.xxx.xxx
network xxx.xxx.xxx.xxx
boardcast xxx.xxx.xxx.xxx
gateway xxx.xxx.xxx.xxx
tags:命令,网络,Ubuntu
Ubuntu网络配置例如:
(1) 配置eth0的IP地址, 同时激活该设备。 #ifconfig eth0 192.168.1.10 netmask 255.255.255.0 up (2) 配置eth0别名设备eth0:1的IP地址,并添加路由。 #ifconfig eth0 192.168.1.3 #route add –host 192.168.1.3 dLINUX下的网络配置命令是ifconfig类似于WINDOWS命令行中的ipconfig。可以使用ifconfig命令来配置并查看网络接口的配置情况。
1、如:
(1) 配置eth0的IP地址, 同时激活该设备。
#ifconfig eth0 192.168.1.10 netmask 255.255.255.0 up
(2) 配置eth0别名设备eth0:1的IP地址,并添加路由。
#ifconfig eth0 192.168.1.3
#route add –host 192.168.1.3 dev eth0:1
(3) 激活设备。
#ifconfig eth0 up
(4) 禁用设备。
#ifconfig eth0 down
(5) 查看指定的网络接口的配置。
#ifconfig eth0
(6) 查看所有的网络接口配置。
#ifconfig
2、 route
可以使用route命令来配置并查看内核路由表的配置情况。
例如:
(1) 添加到主机的路由。
#route add –host 192.168.1.2 dev eth0:0
#route add –host 10.20.30.148 gw 10.20.30.40
(2) 添加到网络的路由。
#route add –net 10.20.30.40 netmask 255.255.255.248 eth0
#route add –net 10.20.30.48 netmask 255.255.255.248 gw 10.20.30.41
#route add –net 192.168.1.0/24 eth1
(3) 添加默认网关。
#route add default gw 192.168.1.1
(4) 查看内核路由表的配置。
#route
(5)删除路由。
#route del –host 192.168.1.2 dev eth0:0
#route del –host 10.20.30.148 gw 10.20.30.40
#route del –net 10.20.30.40 netmask 255.255.255.248 eth0
#route del –net 10.20.30.48 netmask 255.255.255.248 gw 10.20.30.41
#route del –net 192.168.1.0/24 eth1
#route del default gw 192.168.1.1
对于1和2两点可使用下面的语句实现:
Ifconfig eth0 172.16.19.71 netmask 255.255.255.0
Route 0.0.0.0 gw 172.16.19.254
Service network restart
3、 traceroute
可以使用traceroute命令显示数据包到达目的主机所经过的路由。
例如:
#traceroute x
4、 ping
可以使用ping 命令来测试网络的连通性。
例如:
#ping x
#ping –c 4 192.168.1.12
5、 netstat
可以使用netstat命令来显示网络状态信息。
例如:
(1) 显示网络接口状态信息。
#netstat –i
(2) 显示所有监控中的服务器的Socket和正使用Socket的程序信息。
#netstat –lpe
(3) 显示内核路由表信息。
#netstat –r
#netstat –nr
(4) 显示TCP/UDP传输协议的连接状态。
#netstat –t
#netstat –u
6、 hostname
可以使用hostname命令来更改主机名。例如;
#hostname myhost
7、 arp
可以使用arp命令来配置并查看arp缓存。例如:
(1) 查看arp缓存。
#arp
(2) 添加一个IP地址和MAC地址的对应记录。
#arp –s 192.168.33.15 00:60:08:27:CE:B2
(3) 删除一个IP地址和MAC地址的对应缓存记录。
#arp –d192.168.33.15
Ubuntu命令行下的网络配置
编辑 /etc/network/interface文件如下
先添加
auto lo
iface lo inet loopback
auto eth0
如果是自动获取ip,添加
iface eth0 inet dhcp
如果是手动配置ip,添加
iface eth0 inet static
address xxx.xxx.xxx.xxx
netmask xxx.xxx.xxx.xxx
network xxx.xxx.xxx.xxx
boardcast xxx.xxx.xxx.xxx
gateway xxx.xxx.xxx.xxx
tags:命令,网络,Ubuntu
相关文章推荐
- AS3 通过 TCP/IP 协议控制WatchOut播放
- Java 网络编程(五) 使用TCP/IP的套接字(Socket)进行通信
- socket客户端用例测试-HTTP
- Android APP架构的那点事儿[网络模块]
- 移动网络广告优化(速度优化篇)
- android AsyncHttp的简单使用与封装
- HTTP Live Streaming直播(iOS直播)技术分析与实现
- Java 网络编程(四) InetAddress类
- 在mac上开启httpServer服务
- 从TCP协议的原理来谈谈rst复位攻击
- HTTP method POST is not supported by this URL
- CocoaAsyncSocket 网络通信使用之Protobuf安装(五)
- 编译安装http启动问题
- 深入理解Hadoop集群和网络
- 深入浅出Cocoa之Bonjour网络编程
- RTSP协议、RTMP协议、HTTP协议的区别
- c语言客户端与golang服务端通信(网络字节序)
- okhttp请求Demo
- centos minimal 网络配置详细解读
- 解决apache启动错误"httpd:Could not reliably determine