openwrt编译修改固件
2016-01-16 10:55
671 查看
转载自:http://blog.chinaunix.net/uid-25631578-id-4009228.html
(1)-编译703_8M固件
1. target/linux/ar71xx/image/Makefile$(eval $(call SingleProfile,TPLINK-LZMA,$(fs_64kraw),TLWR703,tl-wr703n-v1,TL-WR703N,ttyATH0,115200,0×07030101,1,8Mlzma))
2. tools/firmware-utils/src/mktplinkfw.c
.id = “TL-WR703Nv1″,
.hw_id = HWID_TL_WR703N_V1,
.hw_rev = 1,
.layout_id = “4Mlzma”,
将其中的4Mlzma替换成8Mlzma
(2)-修改默认WIFI,添加WIFI配置,WIFI名为MAC后六位
修改package/kernel/mac80211/files/lib/wifi/mac80211.shoption disabled 1改成0,默认开启wifi。
option disabled 0下添加
option htmode HT40+
option channel 1
option country CN
option noscan 1
option txpower 17
option htmode HT40+ 使用40MHz频宽,但只支持1-7信道。HT40-,支持5-13信道。HT20 支持1-13信道,20MHz频宽
option channel 1使用信道1,1-13之间。若有限定频宽,信道参考如上。
option country CN 设定wifi标准为中国 CN、JP、HK均可开启13信道,默认的US只有1-12信道
option noscan 1 强制使用40MHz的频宽
option txpower 17 发射功率为17dBm,大约50mW。不可设定过大,否则有烧毁PA的危险。
修改默认SSD:
config wifi-iface
option device radio$devidx
option network lan
option mode ap
option ssid OpenWrt_$(cat /sys/class/ieee80211/${dev}/macaddress|awk -F ":" '{print
$4""$5""$6 }'| tr a-z A-Z)option encryption
none
option encryption none
option mode ap,配置模式为AP。例如WDS之类。
option ssid OpenWrt_$(cat /sys/class/ieee80211/${dev}/macaddress|awk -F ":" '{print $4""$5""$6 }'| tr a-z A-Z) 默认SSID为Openwrt_MAC后六位
option encryption none 是否开启加密,可以是psk、psk2、psk2-ccmp等
option network lan 位于哪个接口的管理之下,默认lan。一般无需修改
(3)-修改root密码
默认情况下root是没有密码的,需设定密码才能开启ssh。修改shadow文件,位于package/base-files/files/etc
root:$1$wEehtjxj$YBu4quNfVUjzfv8p/PBo5.:0:0:99999:7:::
密码经过加密,将密码修改成admin。
(4)-修改路由连接数,优化网络参数
修改路由连接数,优化网络参数连接数默认情况下是1.6万多吧。可以选择性修改。
修改sysctl.conf文件,位于package/base-files/files/etc/
net.netfilter.nf_conntrack_max=65535
65535自行替换。
(5)-默认中文,修改主机名,添加并修改默认主题,设定时区
默认中文,添加并默认主题修改feeds/luci/libs/web/root/etc/config
option lang auto
改为
option lang zh_cn
并添加
config internal languages
option en 'English'
option zh_cn 'chinese'
添加主题
1.首先打开trunk/feeds/luci/themes这个目录,你会发现里面有很多主题(除了base为基础包外)每一个文件夹就
是一个主题
2.我们得修改makefile文件,使其制定编译的时候能找到openwrtcn这个主题
找到路径为trunk/feeds/luci/contrib/package/luci下面的makefile文件双击打开
搜索OpenWrt.org这样很快就定位到添加主题的地方了,在下面空白处增加一句
效果如下
$(eval $(call theme,base,Common
base for all themes))
$(eval $(call theme,openwrt,OpenWrt.org ))
$(eval $(call theme,bootstrap,Bootstrap
Theme))
$(eval $(call theme,openwrtcn,openwrtcn
Theme (default),,,1))
$(eval $(call theme,freifunk-bno,Freifunk
Berlin Nordost Theme,\
Stefan Pirwitz <stefan-at-freifunk-bno-dot-de>))
$(eval $(call theme,freifunk-generic,Freifunk
Generic Theme,\
Manuel Munz <freifunk-at-somakoma-dot-de>))
保存退出即可。
修改默认主题
修改feeds/luci/libs/web/root/etc/config
option mediaurlbase /luci-static/openwrt.org
可根据需要将openwrt.org修改为Bootstap、openwrtcn、freifunk-bno、freifunk-generic
修改主机名,设定时区
修改package/base-files/files/etc/config/system
config system
option conloglevel 8
option cronloglevel 8
option hostname Openwrt
option timezone Asia/Shanghai
option timezone CST-8
config timeserver ntp
list server 0.openwrt.pool.ntp.org
list server 1.openwrt.pool.ntp.org
list server 2.openwrt.pool.ntp.org
list server 3.openwrt.pool.ntp.org
option enable_server 0
option hostname Openwrt 设定主机名
option timezone Asia/Shanghai 时区设置为亚洲/上海
option timezone CST-8 正8区
list server 就是ntp服务器了。
(6)-添加aria2,luci添加,web管理界面添加
aria2的源码来自于http://sourceforge.net/projects/aria2/files/stable/
我们这里以aria2-1.17.1版本为例下载的源码格式为aria2-1.17.1.tar.bz2
aria2的依赖安装
很多人没安装这依赖编译时会报错的
sudo apt-get update
sudo apt-get install autoconf automake libcppunit-dev autopoint openssl libtool sphinx-common
sphinxsearch libgcrypt11-dev libxml2-dev pkg-config
开始集成aria2c
首先把下载下来的aria2-1.17.1.tar.bz2放进openwrt源码根目录的dl目录
获取md5码
ctrl+alt+T弹出终端输入
md5sum /……/……/trunk/dl/aria2-1.17.1.tar.bz2
省略好代表openwrt的源码的路径补全,回车就能获取md5码,记住用用的
在/feeds/packages/net/aria2/路径下创建aria2c源码的makefile文件内容如下 (make文件及其他本文需要文件见文章最下方)
#
# Copyright (C) 2012 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License
v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
PKG_NAME:=aria2 名字
PKG_VERSION:=1.17.1
PKG_RELEASE:=1
PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
PKG_SOURCE_URL:=
PKG_MD5SUM:=86229ef8d289893934cb3af25c8fddf6
PKG_INSTALL:=1
include $(INCLUDE_DIR)/package.mk
define Package/aria2
SECTION:=net
CATEGORY:=Network
SUBMENU:=File Transfer
TITLE:=lightweight download utility
URL:=http://aria2.sourceforge.net/
DEPENDS:=+libopenssl +zlib +libxml2 +libstdcpp
\
$(INTL_DEPENDS) $(ICONV_DEPENDS)
endef
define Package/aria2/description
aria2 is a lightweight multi-protocol & multi-source command-line download
utility
endef
define Package/aria2/conffiles
/etc/config/aria2
endef
CONFIGURE_ARGS += \
--disable-nls \
--without-gnutls \
--without-libnettle \
--without-libgmp \
--without-libgcrypt \
--without-libexpat \
--without-libcares \
--without-sqlite3 \
--with-openssl \
--with-libxml2 \
--with-libz
CONFIGURE_VARS += \
ZLIB_CFLAGS="-I$(STAGING_DIR)/usr/include" \
ZLIB_LIBS="-L$(STAGING_DIR)/usr/lib"
define Package/aria2/install
$(INSTALL_DIR) $(1)/usr/bin
$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/aria2c
$(1)/usr/bin
endef
$(eval $(call BuildPackage,aria2))
在feeds目录下面找到packages.index索引文件,添加aria2源码索引记录
双击打开packages.index,在任意位置添加如下代码
Source-Makefile: feeds/packages/net/aria2/Makefile
Package: aria2
Submenu: File Transfer
Version: 1.17.1-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libopenssl +zlib +libxml2 +libstdcpp
Menu-Depends:
Provides:
Section: net
Category: Network
Title: lightweight download utility
Maintainer: OpenWrt Developers Team <openwrt-devel@openwrt.org>
Source: aria2-1.17.1.tar.bz2
Type: ipkg
Description: aria2 is a lightweight multi-protocol & multi-source command-line
download
utility
http://aria2.sourceforge.net/
OpenWrt Developers Team <openwrt-devel@openwrt.org>
@@
到这里aria2算是添加完了,用命令还可以使用,没luci界面是有点不方便,下面完美来添加luci-aria2
添加luci-aria2
文章末有我上传的luci-aria2的源码文件,下载下来后放到你的luci响应的目录,版本不宜样目录可能不宜样
trunk版本为例
把luci-aria2这个文件夹放进/trunk/feeds/luci/applications/这个目录里面
然后在trunk/feeds/目录下找到luci.index 这个索引文件,打开在任意位置添加如下代
Package: luci-app-aria2
Submenu: 3. Applications
Version: 0.11+svk-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +PACKAGE_luci-app-aria2:aria2
Menu-Depends:
Provides:
Build-Depends: lua/host
Section: luci
Category: LuCI
Title: aria2 configuration module
Maintainer: LuCI Development Team <luci@lists.subsignal.org>
Source:
Type: ipkg
Description: aria2 configuration module http://luci.subsignal.org/ LuCI
Development Team <luci@lists.subsignal.org>
@@
保存退出即可
到这里就集成完了
最后在终端执行
./scripts/feeds install -a
make menuconfig
make menuconfig
就可以在luci>3. Applications 找到luci-app-aria2了
(7)-添加fullflash分区,uboot、art分区可写
修改target/linux/ar71xx/files/drivers/mtd/tplinkpart.c#define TPLINK_NUM_PARTS 5
改为
#define TPLINK_NUM_PARTS 6
(即在原有的数值上加1)
然后在文件中找到以下内容
parts[0].name = "u-boot";
parts[0].offset = 0;
parts[0].size = offset;
parts[0].mask_flags = MTD_WRITEABLE;
parts[1].name = "kernel";
parts[1].offset = offset;
parts[1].size = rootfs_offset - offset;
parts[2].name = "rootfs";
parts[2].offset = rootfs_offset;
parts[2].size = art_offset - rootfs_offset;
parts[3].name = "art";
parts[3].offset = art_offset;
parts[3].size = TPLINK_ART_LEN;
parts[3].mask_flags = MTD_WRITEABLE;
parts[4].name = "firmware";
parts[4].offset = offset;
parts[4].size = art_offset - offset
在 parts[4].size = art_offset - offset 后面换一行,添加这段
parts[5].name = "fullflash";
parts[5].offset = 0;
parts[5].size = master->size
uboot、art分区可写,目的是使用ttl刷新uboot、art
注释掉 parts[0].mask_flags = MTD_WRITEABLE;
(8)-顶部菜单添加按钮
比如在顶部菜单添加释放内存按钮
修改/modules/admin-full/luasrc/controller/admin/index.lua
+ entry({"admin", "Free_Memory"}, call("Free_Memory"), _("Free Memory"), 81)
+function Free_Memory()
+
+ luci.util.exec("echo 3 > /proc/sys/vm/drop_caches")
+ luci.http.redirect(luci.dispatcher.build_url("admin", "status", "overview"))
+end
相关文章推荐
- apache EnableMMAP指令
- 编译个性化的openwrt固件
- 通用设备的动态DMA映射
- linux 多工程的环境变量配置方法
- 出现访问apache资源直接下载php文件的解决办法-----yum 安装 php mysql
- Linux php.ini设置date.timezone=XXX为什么不生效?
- Linux C编程Makefile编写初步-转
- 飞龙的程序员书单 – Linux
- copy 、mutableCopy
- Tomcat中server.xml参数说明
- Linux每日学习(八)
- opengl入门9
- opengl入门8
- opengl入门7
- opengl入门6。1
- opengl6
- opengl入门5
- opengl入门4
- opengl入门3
- opengl入门2