7 Steps to Upgrade IOS Image on Cisco Catalyst Switch or Router
2016-01-03 16:56
627 查看
Anytime Cisco releases a new IOS image for its network switch (or router), it is recommended that you upgrade it.
This article explains 7 easy steps to upgrade IOS image on a cisco switch or router.
Since you’ll be upgrading the IOS image, make sure you have physical access to the switch and you are in front of it. Use a console cable to connect to the switch.
Please note that the steps given below will be similar to both switches and routers. However this examples shows how to upgrade ios image on a cisco catalyst switch.
To view the complete article click the following link:
http://www.thegeekstuff.com/2011/06/upgrade-cisco-ios-image/
This article explains 7 easy steps to upgrade IOS image on a cisco switch or router.
Since you’ll be upgrading the IOS image, make sure you have physical access to the switch and you are in front of it. Use a console cable to connect to the switch.
Please note that the steps given below will be similar to both switches and routers. However this examples shows how to upgrade ios image on a cisco catalyst switch.
To view the complete article click the following link:
http://www.thegeekstuff.com/2011/06/upgrade-cisco-ios-image/
内容来自用户分享和网络整理，不保证内容的准确性，如有侵权内容，可联系管理员处理 
相关文章推荐
- 匹配也惹祸
- 匹配也惹祸
- Cisco L2L3 IOU搭建拓扑图
- cisco R3745路由器忘记密码怎么办？
- Cisco设备IOS的两种恢复方法
- Cisco 路由器 交换机 配置 命令
- cisco ios下载
- cisco等资料下载
- Cisco交换机防止VLAN间的ARP***
- RFC中文文档（HSRP）
- CISCO之ACL
- Cisco访问控制列表详解（ACL）
- ＣＩＳＣＯ ＡＣＬ配置全解
- Cisco考试再认证常见31问题解答
- Cisco NAT 配置
- Cisco最新CCNP642-892考题分析
- Cisco 3550端口限速例子
- cisco 未公开的命令
- Cisco PIX 基本配置演示
- Cisco IOS L2F强制隧道基础实验