64、IPv6配置实验之Overlay Tunnel

1、Overlay Tunnel解析



2、实验拓扑




3、基础配置
R1配置
ipv6 unicast-routing
interface Loopback0
ipv6 address 1::1/64
interface FastEthernet1/0
ipv6 address 2000:12::1/64

R2配置
ipv6 unicast-routing
interface Loopback0
ip address 2.2.2.2 255.255.255.0
interface FastEthernet2/0
ip address 23.1.1.2 255.255.255.0
ip route 3.3.3.0 255.255.255.0 23.1.1.3

R3配置
ipv6 unicast-routing
interface Loopback0
ip address 3.3.3.3 255.255.255.0
interface FastEthernet2/0
ip address 23.1.1.3 255.255.255.0
ip route 2.2.2.0 255.255.255.0 23.1.1.2

R4配置
ipv6 unicast-routing
interface Loopback0
ipv6 address 4::4/64
interface FastEthernet1/0
ipv6 address 2000:34::4/64

4、配置Overlay Tunnel
R1配置
interface Loopback0
ipv6 ospf 110 area 0
interface FastEthernet1/0
ipv6 ospf 110 area 0
ipv6 router ospf 110
router-id 1.1.1.1

R2配置
interface Tunnel2
ipv6 enable
ipv6 ospf 110 area 0
tunnel source 2.2.2.2
tunnel destination 3.3.3.3
tunnel mode ipv6ip
interface FastEthernet1/0
ipv6 ospf 110 area 0
ipv6 router ospf 110
router-id 2.2.2.2

R3配置
interface Tunnel3
ipv6 enable
ipv6 ospf 110 area 0
tunnel source 3.3.3.3
tunnel destination 2.2.2.2
tunnel mode ipv6ip
interface FastEthernet1/0
ipv6 ospf 110 area 0
ipv6 router ospf 110
router-id 3.3.3.3

R4配置
interface Loopback0
ipv6 ospf 110 area 0
interface FastEthernet1/0
ipv6 ospf 110 area 0
ipv6 router ospf 110
router-id 4.4.4.4

5、实验测试






此时方法的不足之处在于，当有多个IPv6网络需要互访是，我们需要两两之间都建立Tunnel，工作量将非常大。

本文出自 “开源殿堂” 博客，请务必保留此出处http://kaiyuandiantang.blog.51cto.com/10699754/1727061