Linux-CentOS 解决Deviceeth0 does not seem to be present

在VMware里克隆出来的CentOS Linux。。
ifconfig...没有看到eth0.。然后重启网卡又报下面错误。
故障现象：
servicenetwork restart
Shuttingdown loopback insterface: [ OK ]
Bringingup loopback insterface: [ OK ]
Bringingup interface eth0: Device eth0 does not seem to be present,delayinginitialization. [FAILED]
解决办法：
[root@c1node01 ~]# rm -rf/etc/udev/rules.d/70-persistent-net.rules
[root@c1node01 ~]# reboot ………………
[root@c1node01 ~]# service network restart
Shutting down loopbackinsterface: [ OK ]
Bringing up loopbackinsterface: [ OK ]
Bringing up interfaceeth0: [ OK ]
[root@c1node01 ~]#
如果 还没好
打开/etc/udev/rules.d/70-persistent-net.rules内容如下面例子所示：
# vi/etc/udev/rules.d/70-persistent-net.rules
# Thisfile was automatically generated by the /lib/udev/write_net_rules
#program, run by the persistent-net-generator.rules rules file.
#
# Youcan modify it, as long as you keep each rule on a single
# line,and change only the value of the NAME= key.
# PCIdevice 0x1022:0x2000 (pcnet32)
SUBSYSTEM=="net",ACTION=="add", DRIVERS=="?*",ATTR{address}=="00:0c:29:8f:89:9
7",ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
# PCIdevice 0x1022:0x2000 (pcnet32)
SUBSYSTEM=="net",ACTION=="add", DRIVERS=="?*",ATTR{address}=="00:0c:29:50:bd:1
7",ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"
记录下，eth1网卡的mac地址00:0c:29:50:bd:17
接下来，打开/etc/sysconfig/network-scripts/ifcfg-eth0
# vi/etc/sysconfig/network-scripts/ifcfg-eth0
将 DEVICE="eth0"
改成 DEVICE="eth1" ,
将HWADDR="00:0c:29:8f:89:97" 改成上面的mac地址 HWADDR="00:0c:29:50:bd:17"
最后，重启网络
#service network restart
或者
#/etc/init.d/network restart
正常了。