CentOS7配置redis开机启动
2015-11-30 10:56
645 查看
一:原理介绍
先看下当前系统已设置的开机自启动程序有哪些:
[root@localhost init.d]# chkconfig --list
Note: This output shows SysV services only and does not include native
systemd services. SysV configuration data might be overridden by native
systemd configuration.
If you want to list systemd services use 'systemctl list-unit-files'.
To see services enabled on particular target use
'systemctl list-dependencies [target]'.
netconsole 0:off1:off
2:off3:off
4:off5:off
6:off
network 0:off1:off
2:on3:on
4:on5:on
6:off
[root@localhost init.d]# ls /etc/init.d/ -lrt
total 40
-rwxr-xr-x. 1 root root 6470 Jan 15 2015 network
-rwxr-xr-x. 1 root root 2989 Jan 15 2015 netconsole
-rw-r--r--. 1 root root 13430 Jan 15 2015 functions
-rw-r--r--. 1 root root 1160 Mar 6 2015 README
-rw-r--r--. 1 root root 37 Nov 30 05:43 dump.rdb
从上面可以看出系统已设置的开机自启动程序有network和netconsole,新增开机自启动程序,基本原理为:
系统开机启动时会去加载/etc/init.d/下面的脚本,通常而言每个脚本文件会自定义实现程序的启动;若想将新的程序开机自启动,只需在该目录下添加一个自定义启动程序的脚本,然后设置相应规则即可(如我在/etc/init.d/下新建一个redis的脚本,开机启动时会去加载执行该脚本;当然这只是开机设置自启动的一种方法)
二:实践
废话少说,直接来步骤:
1、设置redis.conf中daemonize为yes,确保守护进程开启。
2、编写开机自启动脚本
脚本内容如下:
3、写完后保存退出VI
4、设置权限
5、启动测试
启动成功会提示如下信息:
使用redis-cli测试:
6、设置开机自启动
7、关机重启测试
然后在用redis-cli测试即可。
说明:本人最初测试时在/etc/init.d/redis脚本文件里没有加上最开头的两行,然后执行chkconfig redis on时报错:service
redis does not support
必须把下面两行注释放在/etc/init.d/redis文件靠前的注释中:
上面的注释的意思是,redis服务必须在运行级2,3,4,5下被启动或关闭,启动的优先级是90,关闭的优先级是10。
先看下当前系统已设置的开机自启动程序有哪些:
[root@localhost init.d]# chkconfig --list
Note: This output shows SysV services only and does not include native
systemd services. SysV configuration data might be overridden by native
systemd configuration.
If you want to list systemd services use 'systemctl list-unit-files'.
To see services enabled on particular target use
'systemctl list-dependencies [target]'.
netconsole 0:off1:off
2:off3:off
4:off5:off
6:off
network 0:off1:off
2:on3:on
4:on5:on
6:off
[root@localhost init.d]# ls /etc/init.d/ -lrt
total 40
-rwxr-xr-x. 1 root root 6470 Jan 15 2015 network
-rwxr-xr-x. 1 root root 2989 Jan 15 2015 netconsole
-rw-r--r--. 1 root root 13430 Jan 15 2015 functions
-rw-r--r--. 1 root root 1160 Mar 6 2015 README
-rw-r--r--. 1 root root 37 Nov 30 05:43 dump.rdb
从上面可以看出系统已设置的开机自启动程序有network和netconsole,新增开机自启动程序,基本原理为:
系统开机启动时会去加载/etc/init.d/下面的脚本,通常而言每个脚本文件会自定义实现程序的启动;若想将新的程序开机自启动,只需在该目录下添加一个自定义启动程序的脚本,然后设置相应规则即可(如我在/etc/init.d/下新建一个redis的脚本,开机启动时会去加载执行该脚本;当然这只是开机设置自启动的一种方法)
二:实践
废话少说,直接来步骤:
1、设置redis.conf中daemonize为yes,确保守护进程开启。
2、编写开机自启动脚本
vi /etc/init.d/redis
脚本内容如下:
# chkconfig: 2345 10 90 # description: Start and Stop redis PATH=/usr/local/bin:/sbin:/usr/bin:/bin REDISPORT=6379
EXEC=/usr/local/redis-3.0.0-beta5/src/redis-server REDIS_CLI=/usr/local/redis-3.0.0-beta5/src/redis-cli PIDFILE=/var/run/redis.pid CONF="/usr/local/redis-3.0.0-beta5/redis.conf"
AUTH="1234" case "$1" in start) if [ -f $PIDFILE ] then echo "$PIDFILE exists, process is already running or crashed." else echo "Starting Redis server..." $EXEC $CONF fi if [ "$?"="0" ] then echo "Redis is running..." fi ;; stop) if [ ! -f $PIDFILE ] then echo "$PIDFILE exists, process is not running." else PID=$(cat $PIDFILE) echo "Stopping..." $REDIS_CLI -p $REDISPORT SHUTDOWN sleep 2 while [ -x $PIDFILE ] do echo "Waiting for Redis to shutdown..." sleep 1 done echo "Redis stopped" fi ;; restart|force-reload) ${0} stop ${0} start ;; *) echo "Usage: /etc/init.d/redis {start|stop|restart|force-reload}" >&2 exit 1 esac
3、写完后保存退出VI
4、设置权限
chmod 755 redis
5、启动测试
/etc/init.d/redis start
启动成功会提示如下信息:
Starting Redis server... 2358:M 30 Nov 05:34:16.991 * Increased maximum number of open files to 10032 (it was originally set to 1024). _._ _.-``__ ''-._ _.-`` `. `_. ''-._ Redis 2.9.54 (00000000/0) 64 bit .-`` .-```. ```\/ _.,_ ''-._ ( ' , .-` | `, ) Running in stand alone mode |`-._`-...-` __...-.``-._|'` _.-'| Port: 6379 | `-._ `._ / _.-' | PID: 2358 `-._ `-._ `-./ _.-' _.-' |`-._`-._ `-.__.-' _.-'_.-'| | `-._`-._ _.-'_.-' | http://redis.io `-._ `-._`-.__.-'_.-' _.-' |`-._`-._ `-.__.-' _.-'_.-'| | `-._`-._ _.-'_.-' | `-._ `-._`-.__.-'_.-' _.-' `-._ `-.__.-' _.-' `-._ _.-' `-.__.-' 2358:M 30 Nov 05:34:16.993 # Server started, Redis version 2.9.54 2358:M 30 Nov 05:34:16.993 # WARNING overcommit_memory is set to 0! Background save may fail under low memory condition. To fix this issue add 'vm.overcommit_memory = 1' to /etc/sysctl.conf and then reboot or run the command 'sysctl vm.overcommit_memory=1' for this to take effect. 2358:M 30 Nov 05:34:16.993 * The server is now ready to accept connections on port 6379
使用redis-cli测试:
[best_husband@localhost src]$ /usr/local/redis-3.0.0-beta5/src/redis-cli 127.0.0.1:6379> set name usbdrivers OK 127.0.0.1:6379> get name "usbdrivers" 127.0.0.1:6379> quit [best_husband@localhost src]$
6、设置开机自启动
chkconfig redis on
7、关机重启测试
reboot
然后在用redis-cli测试即可。
说明:本人最初测试时在/etc/init.d/redis脚本文件里没有加上最开头的两行,然后执行chkconfig redis on时报错:service
redis does not support
必须把下面两行注释放在/etc/init.d/redis文件靠前的注释中:
# chkconfig: 2345 90 10 # description: Redis is a persistent key-value database |
相关文章推荐
- Centos下给php安装Redis扩展及编译问题解决
- Redis 起步
- python操作redis
- Redis利用swap文件将数据从内存转移到磁盘
- Redis是一个磁盘备份内存型数据库
- 漫谈应用缓存的命中率问题
- 一种基于“哨兵”的分布式缓存设计
- Redis系列-php怎么通过redis扩展使用redis
- PHP 使用 Redis
- redis中的事务
- Redis安装配置
- windows下安装redis
- Redis.3.0.5集群安装详解
- redis数据类型
- 利用predis操作redis方法大全
- 玩转redis
- 开源分布式搜索平台ELK+REDIS+SYSLOG-NG实现日志实时搜索(转载)
- REDIS
- 15天玩转redis(mark,redis学习系列)
- redis时间处理的bug