CentOS Linux 升级内核步骤和方法
2015-11-10 16:30
639 查看
http://down.chinaz.com/server/201202/1598_1.htm
1、查看当前系统内核
2、下载linux-3.2.2内核包
3、配置内核并安装
找到以下选中选项并选中networking support → networking options → network packet filtering framework(netfilter)
(1)Core netfilter configuration
勾中"Netfilter connection tracking support" -m state相关模块是依赖它的,不选则没有。
将netbios name service protocal support(new) 编译成模块,不然后面升级iptables后启动时会出错
勾中"Netfilter Xtables support (required for ip_tables)"
(2)IP: Netfilter Configuration
将 "IPv4 connection tracking support (require for NAT)" 编译成模块。
勾中IP tables support (required for filtering/masq/NAT) 。
将 "Full NAT" 下的 "MASQUERADE target support" 和 "REDIRECT target support" 编译成模块
(3)其它模块可以根据自己的需要进行选择,若不懂可以参考内核配置手册.
4、编辑 /etc/grub.conf 文件,将 default=1 改为 default=0
5、重启系统,并查看内核
1、查看当前系统内核
# uname -r 2 2.6.32-71.el6.i686
2、下载linux-3.2.2内核包
# cd ~ # wget -c http://www.kernel.org/pub/linux/kernel/v3.0/linux-3.2.2.tar.bz2 # tar jxvf linux-3.2.2.tar.bz2 # cd linux-3.2.2
3、配置内核并安装
# make mrproper #清除环境变量,即清除配置文件 # make menuconfig #在菜单模式下选择需要编译的内核模块
找到以下选中选项并选中networking support → networking options → network packet filtering framework(netfilter)
(1)Core netfilter configuration
勾中"Netfilter connection tracking support" -m state相关模块是依赖它的,不选则没有。
将netbios name service protocal support(new) 编译成模块,不然后面升级iptables后启动时会出错
勾中"Netfilter Xtables support (required for ip_tables)"
(2)IP: Netfilter Configuration
将 "IPv4 connection tracking support (require for NAT)" 编译成模块。
勾中IP tables support (required for filtering/masq/NAT) 。
将 "Full NAT" 下的 "MASQUERADE target support" 和 "REDIRECT target support" 编译成模块
(3)其它模块可以根据自己的需要进行选择,若不懂可以参考内核配置手册.
# make clean #确保所有东西均保持最新状态. # make bzImage #生成内核文件 # make modules #编译模块 # make modules_install #安装模块 # make install #安装
4、编辑 /etc/grub.conf 文件,将 default=1 改为 default=0
# cat /etc/grub.conf # grub.conf generated by anaconda # # Note that you do not have to rerun grub after making changes to this file # NOTICE: You have a /boot partition. This means that # all kernel and initrd paths are relative to /boot/, eg. # root (hd0,0) # kernel /vmlinuz-version ro root=/dev/mapper/VolGroup-lv_root # initrd /initrd-[generic-]version.img #boot=/dev/sda default=1 timeout=5 splashimage=(hd0,0)/grub/splash.xpm.gz hiddenmenu title CentOS Linux (3.2.2) root (hd0,0) kernel /vmlinuz-3.2.2 ro root=/dev/mapper/VolGroup-lv_root rd_LVM_LV=VolGroup/lv_root rd_LVM_LV=VolGroup/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us crashkernel=auto rhgb quiet initrd /initramfs-3.2.2.img title centos (2.6.32-71.el6.i686) root (hd0,0) kernel /vmlinuz-2.6.32-71.el6.i686 ro root=/dev/mapper/VolGroup-lv_root rd_LVM_LV=VolGroup/lv_root rd_LVM_LV=VolGroup/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us crashkernel=auto rhgb quiet initrd /initramfs-2.6.32-71.el6.i686.img
5、重启系统,并查看内核
# reboot # uname -r
相关文章推荐
- Linux 自检和 SystemTap
- Centos6 编译安装Python
- 硬盘安装CentOS 6.2以及添加GRUB启动菜单
- CentOS 6.2实战部署Nginx+MySQL+PHP
- CentOS 7系统配置上的变化解析
- CentOS下DB2数据库安装过程详解
- CentOS 6.3下编译安装Ruby 2.0笔记
- 在Centos 5.5 上编译安装mysql 5.5.9
- CentOS 6.5源码安装Erlang教程
- Linux内核链表实现过程
- 在CenOS系统下安装和配置Redis数据库的教程
- centos 5.6 升级php到5.3的方法
- CentOS mysql安装系统方法
- centos下安装mysql服务器的方法
- CentOS 5.1 4.6最新官方下载地址列表
- Centos搭建GTK+Codeblock完整版
- CentOS 5.1下跑Mono和Asp.net的实现方法
- centos 安装免费控制面板kloxo步骤