linux下安装mongo
2015-11-05 19:27
756 查看
1.下载安装包
wget http://downloads.mongodb.org/linux/mongodb-linux-i686-1.4.4.tgz
下载完成后解压缩压缩包
tar zxf mongodb-linux-i686-1.4.4.tgz
安装准备
将mongodb移动到/usr/local/mongdb文件夹
mv mongodb-linux-i686-1.4.4 /usr/local/mongodb
创建数据库文件夹与日志文件
mkdir /usr/local/mongodb/data
touch /usr/local/mongodb/logs
设置开机自启动
将mongodb启动项目追加入rc.local保证mongodb在服务器开机时启动
cd /etc/rc.local
echo “/usr/local/server/mongodb/bin/mongod –dbpath=/usr/local/server/mongodb/data –logpath=/usr/local/server/mongodb/logs –logappend –auth –port=27017” >> /etc/rc.local
echo “/usr/local/mongodb/bin/mongod –dbpath=/usr/local/mongodb/data –logpath=/usr/local/mongodb/logs –logappend –auth –port=27017” >> /etc/rc.local
4. 启动mongodb
cd到mongodb目录下的bin文件夹启动mongodb
cd /usr/local/mongodb/bin
//下面这个是需要权限的登录方式, 用户连接需要用户名和密码
/usr/local/mongodb/bin/mongod –dbpath=/usr/local/mongodb/data –logpath=/usr/local/mongodb/logs –logappend –auth –port=27017 –fork
参数解释: –dbpath 数据库路径(数据文件)
–logpath 日志文件路径
–master 指定为主机器
–slave 指定为从机器
–source 指定主机器的IP地址
–pologSize 指定日志文件大小不超过64M.因为resync是非常操作量大且耗时,最好通过设置一个足够大的oplogSize来避免resync(默认的 oplog大小是空闲磁盘大小的5%)。
–logappend 日志文件末尾添加
–port 启用端口号
–fork 在后台运行
–only 指定只复制哪一个数据库
–slavedelay 指从复制检测的时间间隔
–auth 是否需要验证权限登录(用户名和密码)
进入数据库的CLI管理界面
cd到mongodb目录下的bin文件夹,执行命令./mongo
运行如下:
[root@namenode mongodb]# ./bin/mongo
MongoDB shell version: 1.8.2
connecting to: test
use test;
switched to db test
若数据库出现如不能连上,则是一个data目录下的mongod.lock文件的问题,可以用如下的修复的命令,
mongod –repair
7.但是此时仅仅是在mongo的安装目录下才可以进入到mongo数据库,若想要在任何目录下输入mongo即可进入mongo目录,则
cd /usr/local/mongodb/bin
cp mongo /usr/bin/
8.转入到其他目录下测试
可以看到登录成功了,说明我们可以像使用ls命令一样使用mongo命令了。
wget http://downloads.mongodb.org/linux/mongodb-linux-i686-1.4.4.tgz
下载完成后解压缩压缩包
tar zxf mongodb-linux-i686-1.4.4.tgz
安装准备
将mongodb移动到/usr/local/mongdb文件夹
mv mongodb-linux-i686-1.4.4 /usr/local/mongodb
创建数据库文件夹与日志文件
mkdir /usr/local/mongodb/data
touch /usr/local/mongodb/logs
设置开机自启动
将mongodb启动项目追加入rc.local保证mongodb在服务器开机时启动
cd /etc/rc.local
echo “/usr/local/server/mongodb/bin/mongod –dbpath=/usr/local/server/mongodb/data –logpath=/usr/local/server/mongodb/logs –logappend –auth –port=27017” >> /etc/rc.local
echo “/usr/local/mongodb/bin/mongod –dbpath=/usr/local/mongodb/data –logpath=/usr/local/mongodb/logs –logappend –auth –port=27017” >> /etc/rc.local
4. 启动mongodb
cd到mongodb目录下的bin文件夹启动mongodb
cd /usr/local/mongodb/bin
//下面这个是需要权限的登录方式, 用户连接需要用户名和密码
/usr/local/mongodb/bin/mongod –dbpath=/usr/local/mongodb/data –logpath=/usr/local/mongodb/logs –logappend –auth –port=27017 –fork
//这个是不需要密码的 /usr/local/mongodb/bin/mongod --dbpath=/usr/local/mongodb/data --logpath=/usr/local/mongodb/logs --logappend --port=27017 --fork
参数解释: –dbpath 数据库路径(数据文件)
–logpath 日志文件路径
–master 指定为主机器
–slave 指定为从机器
–source 指定主机器的IP地址
–pologSize 指定日志文件大小不超过64M.因为resync是非常操作量大且耗时,最好通过设置一个足够大的oplogSize来避免resync(默认的 oplog大小是空闲磁盘大小的5%)。
–logappend 日志文件末尾添加
–port 启用端口号
–fork 在后台运行
–only 指定只复制哪一个数据库
–slavedelay 指从复制检测的时间间隔
–auth 是否需要验证权限登录(用户名和密码)
-h [ --help ] show this usage information --version show version information -f [ --config ] arg configuration file specifying additional options --port arg specify port number --bind_ip arg local ip address to bind listener - all local ips bound by default -v [ --verbose ] be more verbose (include multiple times for more verbosity e.g. -vvvvv) --dbpath arg (=/data/db/) directory for datafiles 指定数据存放目录 --quiet quieter output 静默模式 --logpath arg file to send all output to instead of stdout 指定日志存放目录 --logappend appnd to logpath instead of over-writing 指定日志是以追加还是以覆盖的方式写入日志文件 --fork fork server process 以创建子进程的方式运行 --cpu periodically show cpu and iowait utilization 周期性的显示cpu和io的使用情况 --noauth run without security 无认证模式运行 --auth run with security 认证模式运行 --objcheck inspect client data for validity on receipt 检查客户端输入数据的有效性检查 --quota enable db quota management 开始数据库配额的管理 --quotaFiles arg number of files allower per db, requires --quota 规定每个数据库允许的文件数 --appsrvpath arg root directory for the babble app server --nocursors diagnostic/debugging option 调试诊断选项 --nohints ignore query hints 忽略查询命中率 --nohttpinterface disable http interface 关闭http接口,默认是28017 --noscripting disable scripting engine 关闭脚本引擎 --noprealloc disable data file preallocation 关闭数据库文件大小预分配 --smallfiles use a smaller default file size 使用较小的默认文件大小 --nssize arg (=16) .ns file size (in MB) for new databases 新数据库ns文件的默认大小 --diaglog arg 0=off 1=W 2=R 3=both 7=W+some reads 提供的方式,是只读,只写,还是读写都行,还是主要写+部分的读模式 --sysinfo print some diagnostic system information 打印系统诊断信息 --upgrade upgrade db if needed 如果需要就更新数据库 --repair run repair on all dbs 修复所有的数据库 --notablescan do not allow table scans 不运行表扫描 --syncdelay arg (=60) seconds between disk syncs (0 for never) 系统同步刷新磁盘的时间,默认是60s Replication options: --master master mode 主复制模式 --slave slave mode 从复制模式 --source arg when slave: specify master as 当为从时,指定主的地址和端口 --only arg when slave: specify a single database to replicate 当为从时,指定需要从主复制的单一库 --pairwith arg address of server to pair with --arbiter arg address of arbiter server 仲裁服务器,在主主中和pair中用到 --autoresync automatically resync if slave data is stale 自动同步从的数据 --oplogSize arg size limit (in MB) for op log 指定操作日志的大小 --opIdMem arg size limit (in bytes) for in memory storage of op ids指定存储操作日志的内存大小 Sharding options: --configsvr declare this is a config db of a cluster 指定shard中的配置服务器 --shardsvr declare this is a shard db of a cluster 指定shard服务器
进入数据库的CLI管理界面
cd到mongodb目录下的bin文件夹,执行命令./mongo
运行如下:
[root@namenode mongodb]# ./bin/mongo
MongoDB shell version: 1.8.2
connecting to: test
use test;
switched to db test
若数据库出现如不能连上,则是一个data目录下的mongod.lock文件的问题,可以用如下的修复的命令,
mongod –repair
7.但是此时仅仅是在mongo的安装目录下才可以进入到mongo数据库,若想要在任何目录下输入mongo即可进入mongo目录,则
cd /usr/local/mongodb/bin
cp mongo /usr/bin/
8.转入到其他目录下测试
[root@localhost bin]# cd / [root@localhost /]# mongo MongoDB shell version: 1.4.4 connecting to: test >
可以看到登录成功了,说明我们可以像使用ls命令一样使用mongo命令了。
相关文章推荐
- Linux程序之线程轮询
- Linux软件安装与管理
- Linux基本安全措施、加强系统账号密码安全、系统引导和登录安全、用户切换、su、sudo、grub菜单
- linux下的用户管理(二)
- linux之cp/scp命令+scp命令详解
- linux免密码登录
- Linux静态库和动态库
- Linux静态库和动态库
- linux下c/c++实例之三只允许单个程序运行
- Linux samba配置与使用(fedora 22)
- linux下pear安装
- linux下的用户管理(一)
- Linux修改SSH端口的方法
- Linux 6.4 网卡 not active 解决
- centos 7.0安装kvm
- linux C 中 mkdir
- Error connecting to graphical console: Error initializing USB support: Other errors[-99]
- Linux环境下安卓SDK和ADT下载地址下载地址
- Linux系统修改系统时间说明
- centos7下使用yum安装mysql并创建用户,数据库以及设置远程访问