camera sensor ov4689 调试（一）

# modified: crane_standard.mk

# modified: init.sun8i.rc

device/softwinner/crane-standard/modules/modules/videobuf2-vmalloc.ko:/system/vendor/modules/videobuf2-vmal

- device/softwinner/crane-standard/modules/modules/uvcvideo.ko:/system/vendor/modules/uvcvideo.ko

+ device/softwinner/crane-standard/modules/modules/uvcvideo.ko:/system/vendor/modules/uvcvideo.ko \

+ device/softwinner/crane-standard/modules/modules/ov4689_sdv.ko:/system/vendor/modules/ov4689_sdv.ko

insmod /system/vendor/modules/vfe_os.ko

insmod /system/vendor/modules/vfe_subdev.ko

- insmod /system/vendor/modules/ov2710_mipi.ko

- insmod /system/vendor/modules/vfe_v4l2.ko

+# insmod /system/vendor/modules/ov2710_mipi.ko

+ insmod /system/vendor/modules/ov4689_sdv.ko

+

+ insmod /system/vendor/modules/vfe_v4l2.ko ccm="ov4689_sdv" i2c_addr=0x42

+# insmod /system/vendor/modules/vfe_v4l2.ko

# uvc sensor

--- a/pack/chips/sun8iw8p1/configs/crane-standard/sys_config.fex

+++ b/pack/chips/sun8iw8p1/configs/crane-standard/sys_config.fex

@@ -491,9 +491,9 @@ lcd_cmap_en = 0

lcdgamma4iep = 22

-lcd_bl_en = port:PC10<1><0><default><1>

+lcd_bl_en = port:PB13<1><0><default><1>

lcd_power = ""

-lcd_gpio_0 = port:PG11<1><0><default><1>

+lcd_gpio_0 = port:PB12<1><0><default><1>

lcdd2 = port:PD0<2><0><default><default>

lcdd3 = port:PD1<2><0><default><default>

@@ -593,29 +593,29 @@ vip_csi_mck = port:PE20<3><default><default><default>

vip_csi_sck = port:PE21<2><default><default><default>

vip_csi_sda = port:PE22<2><default><default><default>

-vip_dev0_mname = "ov2710_mipi"

-;vip_dev0_mname = "ov4689"

+;vip_dev0_mname = "ov2710_mipi"

+vip_dev0_mname = "ov4689_sdv"

vip_dev0_pos = "rear"

vip_dev0_lane = 1

vip_dev0_twi_id = 0

-vip_dev0_twi_addr = 0x6c

-;vip_dev0_twi_addr = 0x42

+;vip_dev0_twi_addr = 0x6c

+vip_dev0_twi_addr = 0x42

vip_dev0_isp_used = 1

vip_dev0_fmt = 1

vip_dev0_stby_mode = 0

vip_dev0_vflip = 1

vip_dev0_hflip = 1

vip_dev0_iovdd = ""

-vip_dev0_iovdd_vol = 1800000

+vip_dev0_iovdd_vol = 2800000

vip_dev0_avdd = ""

vip_dev0_avdd_vol = 2800000

vip_dev0_dvdd = ""

-vip_dev0_dvdd_vol = 1800000

+vip_dev0_dvdd_vol = 2800000

vip_dev0_afvdd = ""

vip_dev0_afvdd_vol = 2800000

vip_dev0_power_en =

-vip_dev0_reset = port:PG12<1><default><default><default>

-vip_dev0_pwdn = port:PG13<1><default><default><default>

+vip_dev0_reset = port:PE18<1><default><default><default>

+vip_dev0_pwdn = port:PE19<1><default><default><default>

vip_dev0_flash_en =

vip_dev0_flash_mode =

#

# Sensor CSI

#

# CONFIG_OV2710_MIPI is not set

# CONFIG_OV4689 is not set

# CONFIG_OV4689_60FPS is not set

# CONFIG_AR0330_MIPI is not set

CONFIG_OV4689_SDV=m

# CONFIG_GC1004_MIPI is not set

# CONFIG_H22_MIPI is not set

# CONFIG_NT99231_MIPI is not set

# CONFIG_V4L_MEM2MEM_DRIVERS is not set

# CONFIG_AW_TSC is not set

# CONFIG_RADIO_ADAPTERS is not set

CONFIG_VIDEO_ENCODER_DECODER_SUNXI=y

#

# Graphics support

3.160723] init: command 'insmod' r=0

[ 3.165146] init: skipping insecure file '/system/vendor/modules/cci.ko'

[ 3.411723] [VFE]cci probe start cci_sel = 0!

[ 3.416942] [VFE]cci probe end cci_sel = 0!

[ 3.421883] [VFE]cci_init end

[ 3.425446] init: command 'insmod' r=0

[ 3.429967] init: skipping insecure file '/system/vendor/modules/vfe_os.ko'

[ 3.496799] init: command 'insmod' r=0

[ 3.501460] init: skipping insecure file '/system/vendor/modules/vfe_subdev.ko'

[ 3.837312] init: command 'insmod' r=0

[ 3.841895] init: skipping insecure file '/system/vendor/modules/ov4689_sdv.ko'

[ 4.225529] init: command 'insmod' r=0

[ 4.230088] init: skipping insecure file '/system/vendor/modules/vfe_v4l2.ko'

[ 4.777132] [VFE]Welcome to Video Front End driver

[ 4.783275] [VFE]pdev->id = 0

[ 4.786676] [VFE]dev->mipi_sel = 0

[ 4.790540] [VFE]dev->vip_sel = 0

[ 4.794285] [VFE]dev->isp_sel = 0

[ 4.804243] [VFE_WARN]vfe vpu clock is null

[ 4.815345] [ISP] isp platform_id = 6!

[ 4.819709] [VFE]vfe_init end

[ 4.823248] [VFE]probe_work_handle start!

[ 4.827770] [VFE]..........................vfe clk open!.......................

[ 4.836349] init: command 'insmod' r=0

[ 4.840634] init: processing action 0x975b78 (property_service_init)

[ 4.848454] [VFE]v4l2 subdev register input_num = 0

[ 4.853995] [VFE]vfe sensor detect start! input_num = 0

[ 4.859864] [VFE_WARN]NOT found this item: ov4689_sdv, you can add this sensor in the sensor_list_t!

[ 4.870254] [VFE]Sub device register "ov4689_sdv" i2c_addr = 0x42 start!

[ 4.877855] [VFE]v4l2_device_register_subdev return 0

[ 4.883539] [VFE]registered sensor subdev is OK!

[ 4.888799] [VFE]Check sensor!

[ 4.892259] [VFE]Sub device register "ov4689_sdv" is OK!

[ 4.900889] init: skipping insecure file '/system/build.prop'

[ 4.907763] [VFE]Check open /system/etc/hawkview/ov4689_sdv/isp_test_param.ini failed!

[ 4.907773] Match isp cfg start!

[ 4.920494] [VFE_WARN]NOT found this item: ov4689_sdv, you can add this ISP Config in the isp_cfg_array!

[ 4.931263] [VFE]read ini start

[ 4.934869] [VFE]Fetch ini file form "/system/etc/hawkview/ov4689_sdv/isp_test_param.ini"

[ 4.946357] [vfe_warn]open file failed!

[ 4.951061] [VFE_WARN]read ini info fail

[ 4.955968] [VFE]V4L2 device registered as video0

[ 4.961429] [VFE]..........................vfe clk close!.......................

[ 4.969726] [VFE]probe_work_handle end!

[ 5.045620] init: Created socket '/dev/socket/property_service' with mode '666', user '0', group '0'

[ 5.058265] init: command 'property_service_init' r=0

[ 5.066199] init: processing action 0x975bc0 (signal_init)

[ 5.074723] init: command 'signal_init' r=0

[ 5.079444] init: processing action 0x975c08 (check_startup)

[ 5.088041] init: command 'check_startup' r=0

[ 5.093054] init: processing action 0x9737c8 (boot)

[ 5.098944] init: command 'ifup' r=0

[ 5.105273] init: command 'hostname' r=0

[ 5.109765] init: command 'domainname' r=0

[ 5.121721] init: command 'setrlimit' r=0

[ 5.126409] init: command 'chown' r=0

[ 5.132863] init: starting 'servicemanager'

[ 5.140160] init: starting 'vold'

[ 5.144335] init: starting 'newcdr'

[ 5.148530] init: command 'class_start' r=0

[ 5.156647] init: Created socket '/dev/socket/vold' with mode '660', user '0', group '1009'

[ 5.171109] init: starting 'debuggerd'

[ 5.175702] init: starting 'media'

[ 5.179970] init: starting 'standby'

[ 5.192599] init: command 'class_start' r=0

[ 5.197375] init: processing action 0x9748a8 (boot)

[ 5.206865] init: command 'setprop' r=0

[ 5.211273] init: command 'setprop' r=0

[ 5.215612] init: processing action 0x975c50 (queue_property_triggers)

[ 5.225282] init: command 'queue_property_triggers' r=0

[ 5.233392] init: processing action 0x973aa8 (property:ro.debuggable=1)

[ 5.243215] init: starting 'console'

[ 5.247551] init: command 'start' r=0

[ 5.256938] init: processing action 0x975568 (property:sys.usb.config=mass_storage,adb)

[ 5.267313] android_usb: already disabled

[ 5.271984] init: command 'write' r=0

[ 5.276210] init: command 'write' r=0

[ 5.282583] init: command 'write' r=0

[ 5.286880] init: command 'write' r=0

[ 5.291204] init: command 'write' r=0

[ 5.295529] init: command 'setprop' r=0

root@camdroid:/ # [ 8.381957] ★·newcdr·★: main entry

[ 8.386875] ★·newcdr·★: ===no need to check battery capacity ===

[ 10.683494] [DISP] ready enter pm_runtime_get_sync, device0

[ 11.389331] init: processing action 0x975568 (property:sys.usb.config=mass_storage,adb)

[ 11.429044] init: command 'write' r=0

[ 11.434172] init: command 'write' r=0

[ 11.440300] init: command 'write' r=0

[ 11.445969] init: command 'write' r=0

[ 11.450567] init: command 'write' r=0

[ 11.455413] init: command 'setprop' r=0

[ 11.586209] [VFE]vfe_open

[ 11.589208] [VFE]..........................vfe clk open!.......................

[ 11.618394] [VFE]vfe_open ok

[ 11.630469] [VFE_WARN]NOT found this item: ov4689_sdv, you can add this sensor in the sensor_list_t!

[ 11.654571] [VFE_WARN]Not find this sensor info, Set vfe core clk = 500000000, after Set vfe core clk = 360000000

[ 11.676540] [VFE_WARN]os_gpio_set_status, hdl is NULL

[ 11.716782] [VFE]mclk on

[ 11.859533] [VFE]V4L2_MBUS_CSI2,4 lane,bus1 channel,rx 1 channel

[ 11.985016] [ov4689_sdv]s_fmt = 3019, width = 1920, height = 1080

[ 11.991875] [ov4689_sdv]s_fmt end

[ 11.995724] [VFE]width_input = 2688, height_input = 1520, width = 1920, height = 1080

[ 12.004494] [ISP] full_size width = 1920, height = 1080.

[ 12.015550] [ISP] scale width = 960, height = 540

[ 12.020848] [VFE]dev->buf_byte_size = 3919872, double_ch_flag = 1

[ 12.027752] [VFE]Init isp ini configs from isp_cfg.

[ 12.033739] [ISP] VIDEO_MODE!

[ 12.097925] [VFE]put 1 frame into one buf to output!

[ 12.103725] [VFE]buffer_setup, buffer count=5, size=3923968

[ 12.174120] ★·newcdr·★: startPreview finished

[ 12.186534] [VFE]capture video mode!

[ 12.219888] [VFE]capture video first frame done!

[ 21.440289] set usbcur 0 mA

[ 21.443857] set usbvol 4000 mV