Linux进程查看与管理以及作业控制
2015-09-29 15:44
731 查看
切换主处理板卡:redundancy force−switchover
-----------------------------------------------------------------------------------
Cisco4507#show redundancy domain default
Redundant System Information :
------------------------------
Available system uptime = 9 minutes
Switchovers system experienced = 1
Standby failures = 0
Last switchover reason = user forced
Hardware Mode = Duplex
Configured Redundancy Mode = Stateful Switchover
Operating Redundancy Mode = Stateful Switchover
Maintenance Mode = Disabled
Communications = Up
Current Processor Information :
-------------------------------
Active Location = slot 3
Current Software state = ACTIVE
Uptime in current state = 6 minutes
Image Version = Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500e-ENTSERVICESK9-M), Version 12.2(54)SG1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Thu 27-Jan-11 12:07 by prod_rel_team
BOOT = bootflash:cat4500e-ipbase-mz.122-50.SG3.bin,1;bootflash:/cat4500e-entservicesk9-mz.122-54.SG1.bin,1;
Configuration register = 0x2
Peer Processor Information :
----------------------------
Standby Location = slot 4
Current Software state = STANDBY HOT
Uptime in current state = 1 minute
Image Version = Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500e-ENTSERVICESK9-M), Version 12.2(54)SG1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Thu 27-Jan-11 12:07 by
BOOT = bootflash:cat4500e-ipbase-mz.122-50.SG3.bin,1;bootflash:/cat4500e-entservicesk9-mz.122-54.SG1.bin,1;
Configuration register = 0x2
---------------------------------------------------------------
Cisco4507#show redundancy switchover history
Index Previous Current Switchover Switchover
active active reason time
----- -------- ------- ---------- ----------
1 4 3 user forced 06:28:04 UTC Fri May 27 2011
2 3 4 user forced 06:35:37 UTC Fri May 27 2011
------------------------------------------------
Cisco4507#show redundancy domain default
Redundant System Information :
------------------------------
Available system uptime = 16 minutes
Switchovers system experienced = 2
Standby failures = 0
Last switchover reason = user forced
Hardware Mode = Duplex
Configured Redundancy Mode = Stateful Switchover
Operating Redundancy Mode = Stateful Switchover
Maintenance Mode = Disabled
Communications = Down Reason: Simplex mode
Current Processor Information :
-------------------------------
Active Location = slot 4
Current Software state = ACTIVE
Uptime in current state = 9 minutes
Image Version = Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500e-ENTSERVICESK9-M), Version 12.2(54)SG1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Thu 27-Jan-11 12:07 by prod_rel_team
BOOT = bootflash:cat4500e-ipbase-mz.122-50.SG3.bin,1;bootflash:/cat4500e-entservicesk9-mz.122-54.SG1.bin,1;
Configuration register = 0x2
Peer (slot: 3) information is not available because it is in 'DISABLED' state
-----------------------------------------------------------------------------------
Cisco4507#show redundancy domain default
Redundant System Information :
------------------------------
Available system uptime = 9 minutes
Switchovers system experienced = 1
Standby failures = 0
Last switchover reason = user forced
Hardware Mode = Duplex
Configured Redundancy Mode = Stateful Switchover
Operating Redundancy Mode = Stateful Switchover
Maintenance Mode = Disabled
Communications = Up
Current Processor Information :
-------------------------------
Active Location = slot 3
Current Software state = ACTIVE
Uptime in current state = 6 minutes
Image Version = Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500e-ENTSERVICESK9-M), Version 12.2(54)SG1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Thu 27-Jan-11 12:07 by prod_rel_team
BOOT = bootflash:cat4500e-ipbase-mz.122-50.SG3.bin,1;bootflash:/cat4500e-entservicesk9-mz.122-54.SG1.bin,1;
Configuration register = 0x2
Peer Processor Information :
----------------------------
Standby Location = slot 4
Current Software state = STANDBY HOT
Uptime in current state = 1 minute
Image Version = Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500e-ENTSERVICESK9-M), Version 12.2(54)SG1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Thu 27-Jan-11 12:07 by
BOOT = bootflash:cat4500e-ipbase-mz.122-50.SG3.bin,1;bootflash:/cat4500e-entservicesk9-mz.122-54.SG1.bin,1;
Configuration register = 0x2
---------------------------------------------------------------
Cisco4507#show redundancy switchover history
Index Previous Current Switchover Switchover
active active reason time
----- -------- ------- ---------- ----------
1 4 3 user forced 06:28:04 UTC Fri May 27 2011
2 3 4 user forced 06:35:37 UTC Fri May 27 2011
------------------------------------------------
Cisco4507#show redundancy domain default
Redundant System Information :
------------------------------
Available system uptime = 16 minutes
Switchovers system experienced = 2
Standby failures = 0
Last switchover reason = user forced
Hardware Mode = Duplex
Configured Redundancy Mode = Stateful Switchover
Operating Redundancy Mode = Stateful Switchover
Maintenance Mode = Disabled
Communications = Down Reason: Simplex mode
Current Processor Information :
-------------------------------
Active Location = slot 4
Current Software state = ACTIVE
Uptime in current state = 9 minutes
Image Version = Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500e-ENTSERVICESK9-M), Version 12.2(54)SG1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Thu 27-Jan-11 12:07 by prod_rel_team
BOOT = bootflash:cat4500e-ipbase-mz.122-50.SG3.bin,1;bootflash:/cat4500e-entservicesk9-mz.122-54.SG1.bin,1;
Configuration register = 0x2
Peer (slot: 3) information is not available because it is in 'DISABLED' state
相关文章推荐
- Linux内核源码详解——命令篇之iostat[zz]
- Linux 版本简述
- Linux统计某文件夹下文件、文件夹的个数
- Centos6.5更换163源 epel源
- 学习笔记 centos7 lamp 作业
- linux 技巧:使用 screen 管理你的远程会话
- linux exec函数家族
- 由尚德Linux内核编程进阶视频教程(29集)
- linux 生成和使用动态链接库和静态链接库的Makefile编写
- Linux系统VPS/服务器安装WINDOWS桌面环境可以采用的几个方法
- Centos6.4 本地yum源配置
- Linux定时执行任务命令概述:at和crontab
- I can only install jdk1.6 on CentOS 6.5
- linux ulimit到底是做什么的
- 如何查看Linux 硬件配置信息
- linux使用flock文件锁解决脚本重复执行问题
- Linux简史及特点
- centos安装图形
- 用CentOS 7打造合适的科研环境
- Linux内核调试利器——printk