SQLite/嵌入式数据库
2015-09-04 12:38
666 查看
SQLite/嵌入式数据库
的项目要么不使用数据库（一两个文配置文件就可以搞定），要么就会有很多的数据，用到 postgresql，操练sqlite的还没有。现在我有个自己的小测试例子，写个数据库对比的小项目例子，我就准备把数据存储在sqlite上，第一 数据不是很大，百位级别；为桌面应用软件，嵌入式的。sqlite 很适合。
安装：
1> os：ubuntu。
由于是使用代理上的网，估计没有配置好，apt-get intall sqlite3自动安装没有成功，就采用了源码安装。
2> package from ： http://www.sqlite.org/sqlite-autoconf-3071502.tar.gz，要选择这个autoconf的，不然就只有源码没有项目管理脚本（auto 工具集）
3> tar -xzvf sqlite-autoconf-3071502.tar.gz ， cd，./configure, make , make install. 很顺利的就安装完毕
4> 运行 sqlite3. 有错误
在make install 的log中指出安装的路径都在/usr/local 下，在configure中也有对应的代码代码指出了这个路径
在/usr/lib/i386-linux-gnu中也确实有libsqlite3*的文件
遂果断处理：mv /usr/lib/i386-linux-gnu/*sqlite3* /tmp
在运行sqlite3， cmd的管理界面出现了。
快速入门：
shell中使用命令来了解sqlite的使用，文中大部分篇幅介绍了在sqlite3交互界面中的使用，还有些直接使用sh命令交互，非常好。http://www.sqlite.org/sqlite.html
c语言使用
一较为详细的c语言使用sqlite3的例子，测试通过。包含了如下过程，打开数据库文件（没有则新建），建立表（没有则新建），插入数据，查询输出，关闭数据库文件。文件虽小，却包含整个过程，配合博主的解释，和评论者的积极参与，可窥探sqlite使用概貌。
源码：
编译： gcc basics.c -o basics -lsqlite3 -std=c99
运行： ./basics
文件列表如下
例子原文：http://milky.manishsinha.net/2009/03/30/sqlite-with-c/
不知道在不使用代理情况下是否能够看到，我仅贴原文如下（不包含评论）：
------------------------------------------------------
‘C’ has always been my favourite language due to simple facts that it
is beautiful and low level in nature. I don’t claim that am a ‘Geek’ in
this language, its just my love that pulls me towards it. Let’s have a
look at the other languages usually liked by the public – VB, Java,
Perl , Python. All of them may be good in their own ways but C kicks
ass. VB?? urgh… Sorry! I vow not to code in it. It’s syntax is very
unusual and every Tom,Dick and Harry claims to be a champ of that
language.
The biggest problem which I face in C is storing data or in short
making data persistent. One way is to write the required to a file on
the disk in a fixed format. This stored data can then be read and parsed
as per requirement. This approach is good for small amount of data, but
what about huge amount of data? You would spend a big share of your
time just for structured file I/O. Finally you would land up writing a
small module for this work. Why not use any such existing database
software for the same? Here comes SQLite for rescue.
I have seen a lot of tutorials on the net, they are very good but none
of them suited my needs. The requirement was to explain a sample code
line by line. After lots of googling and tea, I managed to make it work!
The code snippet which I made is able to create new database if it does
not exist, create a table if it does not exist, enter two rows and then
fetch those two rows and print them on the screen. Check the code which I have committed the code to my personal google code repository.
Let me explain the code. Sorry for not aligning it. Please download the raw file.
#include
#include
#include
int main(int argc, char** args)
{
// Create an int variable for storing the return code for each call
int retval;
Include stdio.h, sqlite3.h and stdlib.h , stdlib.h is for malloc and
sqlite3.h contains the standard function declarations needed for the
required functionality.
// The number of queries to be handled,size of each query and pointer
int q_cnt = 5,q_size = 150,ind = 0;
char **queries = malloc(sizeof(char) * q_cnt * q_size);
q_cnt stored the number of queries we may want to do, q_size stores the max size of a SQL query, ind is the index.
**queries is a double array or matrix which stores the multiple queries. The total amount of storage to be allocated is sizeof(char) * q_cnt * q_size
// A prepered statement for fetching tables
sqlite3_stmt *stmt;
// Create a handle for database connection, create a pointer to sqlite3
sqlite3 *handle;
// try to create the database. If it doesnt exist, it would be created
// pass a pointer to the pointer to sqlite3, in short sqlite3**
retval = sqlite3_open(“sampledb.sqlite3″,&handle);
// If connection failed, handle returns NULL
if(retval)
{
printf(“Database connection failed\n”);
return -1;
}
printf(“Connection successful\n”);
We need to create a pointer to sqlite3 and sqlite3_stmt structures.
sqlite3 is the structure which is to hold the database connection
handle. sqlite3_stmt is just like a cursor to a database.
sqlite3_open function needs the address of the sqlite3 database instance on the disk. The second parameter is the pointer to the pointer to sqlite3 structure. One mistake which I stumbled upon was to create a sqlite3 ** handle and then pass it to this function. The correct way is to create a sqlite3* handle and then pass the pointer to it using the & operator
// Create the SQL query for creating a table
char create_table[100] = “CREATE TABLE IF NOT EXISTS users (uname TEXT PRIMARY KEY,pass TEXT NOT NULL,activated INTEGER)”;
// Execute the query for creating the table
retval = sqlite3_exec(handle,create_table,0,0,0);
// Insert first row and second row
queries[ind++] = “INSERT INTO users VALUES(‘manish’,'manish’,1)”;
retval = sqlite3_exec(handle,queries[ind-1],0,0,0);
queries[ind++] = “INSERT INTO users VALUES(‘mehul’,'pulsar’,0)”;
retval = sqlite3_exec(handle,queries[ind-1],0,0,0);
Create a table if it does not exist and then insert two rows. Note
that sqlite3 does not support inserting two rows in one single query.
Maybe I need to confirm this fact again, but I never worked for me ever.
// select those rows from the table
queries[ind++] = “SELECT * from users”;
retval = sqlite3_prepare_v2(handle,queries[ind-1],-1,&stmt,0);
if(retval)
{
printf(“Selecting data from DB Failed\n”);
return -1;
}
// Read the number of rows fetched
int cols = sqlite3_column_count(stmt);
Create a prepared statement for fetching data from the database usingsqlite3_prepare_v2 function call. The first parameter is the database handle itself which is a sqlite3* pointer.
The second parameter is the SQL statement which needs to be executed.
The third parameter tells upto how long the second parameter to be read.
Pass -1 to make it read till line terminator. Fourth statement is the
pointer to pointer to prepared statement structure. Take care of the
pointer concept as I told about sqlite3 structure. The fifth parameter
is filled with the unused portion of the query. Have a look at the official documentation.
sqlite3_column_count function gets the number of columns for the result fetched.
while(1)
{
// fetch a row’s status
retval = sqlite3_step(stmt);
if(retval == SQLITE_ROW)
{
// SQLITE_ROW means fetched a row
// sqlite3_column_text returns a const void* , typecast it to const char*
for(int col=0 ; col
{
const char *val = (const char*)sqlite3_column_text(stmt,col);
printf(“%s = %s\t”,sqlite3_column_name(stmt,col),val);
}
printf(“\n”);
}
else if(retval == SQLITE_DONE)
{
// All rows finished
printf(“All rows fetched\n”);
break;
}
else
{
// Some error encountered
printf(“Some error encountered\n”);
return -1;
}
}
We have put this code in infinite while loop as we are not sure how
much rows it contains. Usually, the table returns n+1 rows, where 1
extra row is for telling that all rows have been fetched. sqlite3_step
returns the status which is actually an enumeration. Check all the results contants here. Two most used are SQLITE_DONE, SQLITE_ROW.
The former tells that all the rows have been fetched, now the user can
come out of this loop and continue. SQLITE_ROW tells that a valid row
has been fetched.
// Close the handle to free memory
sqlite3_close(handle);
return 0;
}
sqlite3_close simply closes the database connection.
Save the code in a file named, say dataman.c , compile it using the command
$ gcc dataman.c -o dataman -l sqlite –std=c99
You obviously need to have sqlite development headers installed for compiling the same. The name of the package on Ubuntu is libsqlite3-dev
Official SQLite Documentation
参考：
快速入门 http://www.sqlite.org/sqlite.html
“SQLite header and source version mismatch” http://jianshusoft.blog.51cto.com/2380869/824575
c语言的较为详细的例子 http://milky.manishsinha.net/2009/03/30/sqlite-with-c/
的项目要么不使用数据库（一两个文配置文件就可以搞定），要么就会有很多的数据，用到 postgresql，操练sqlite的还没有。现在我有个自己的小测试例子，写个数据库对比的小项目例子，我就准备把数据存储在sqlite上，第一 数据不是很大，百位级别；为桌面应用软件，嵌入式的。sqlite 很适合。
安装：
1> os：ubuntu。
由于是使用代理上的网，估计没有配置好，apt-get intall sqlite3自动安装没有成功，就采用了源码安装。
2> package from ： http://www.sqlite.org/sqlite-autoconf-3071502.tar.gz，要选择这个autoconf的，不然就只有源码没有项目管理脚本（auto 工具集）
3> tar -xzvf sqlite-autoconf-3071502.tar.gz ， cd，./configure, make , make install. 很顺利的就安装完毕
4> 运行 sqlite3. 有错误
在make install 的log中指出安装的路径都在/usr/local 下，在configure中也有对应的代码代码指出了这个路径
在/usr/lib/i386-linux-gnu中也确实有libsqlite3*的文件
遂果断处理：mv /usr/lib/i386-linux-gnu/*sqlite3* /tmp
在运行sqlite3， cmd的管理界面出现了。
快速入门：
shell中使用命令来了解sqlite的使用，文中大部分篇幅介绍了在sqlite3交互界面中的使用，还有些直接使用sh命令交互，非常好。http://www.sqlite.org/sqlite.html
c语言使用
一较为详细的c语言使用sqlite3的例子，测试通过。包含了如下过程，打开数据库文件（没有则新建），建立表（没有则新建），插入数据，查询输出，关闭数据库文件。文件虽小，却包含整个过程，配合博主的解释，和评论者的积极参与，可窥探sqlite使用概貌。
源码：
编译： gcc basics.c -o basics -lsqlite3 -std=c99
运行： ./basics
不知道在不使用代理情况下是否能够看到，我仅贴原文如下（不包含评论）：
------------------------------------------------------
‘C’ has always been my favourite language due to simple facts that it
is beautiful and low level in nature. I don’t claim that am a ‘Geek’ in
this language, its just my love that pulls me towards it. Let’s have a
look at the other languages usually liked by the public – VB, Java,
Perl , Python. All of them may be good in their own ways but C kicks
ass. VB?? urgh… Sorry! I vow not to code in it. It’s syntax is very
unusual and every Tom,Dick and Harry claims to be a champ of that
language.
The biggest problem which I face in C is storing data or in short
making data persistent. One way is to write the required to a file on
the disk in a fixed format. This stored data can then be read and parsed
as per requirement. This approach is good for small amount of data, but
what about huge amount of data? You would spend a big share of your
time just for structured file I/O. Finally you would land up writing a
small module for this work. Why not use any such existing database
software for the same? Here comes SQLite for rescue.
I have seen a lot of tutorials on the net, they are very good but none
of them suited my needs. The requirement was to explain a sample code
line by line. After lots of googling and tea, I managed to make it work!
The code snippet which I made is able to create new database if it does
not exist, create a table if it does not exist, enter two rows and then
fetch those two rows and print them on the screen. Check the code which I have committed the code to my personal google code repository.
Let me explain the code. Sorry for not aligning it. Please download the raw file.
#include
#include
#include
int main(int argc, char** args)
{
// Create an int variable for storing the return code for each call
int retval;
Include stdio.h, sqlite3.h and stdlib.h , stdlib.h is for malloc and
sqlite3.h contains the standard function declarations needed for the
required functionality.
// The number of queries to be handled,size of each query and pointer
int q_cnt = 5,q_size = 150,ind = 0;
char **queries = malloc(sizeof(char) * q_cnt * q_size);
q_cnt stored the number of queries we may want to do, q_size stores the max size of a SQL query, ind is the index.
**queries is a double array or matrix which stores the multiple queries. The total amount of storage to be allocated is sizeof(char) * q_cnt * q_size
// A prepered statement for fetching tables
sqlite3_stmt *stmt;
// Create a handle for database connection, create a pointer to sqlite3
sqlite3 *handle;
// try to create the database. If it doesnt exist, it would be created
// pass a pointer to the pointer to sqlite3, in short sqlite3**
retval = sqlite3_open(“sampledb.sqlite3″,&handle);
// If connection failed, handle returns NULL
if(retval)
{
printf(“Database connection failed\n”);
return -1;
}
printf(“Connection successful\n”);
We need to create a pointer to sqlite3 and sqlite3_stmt structures.
sqlite3 is the structure which is to hold the database connection
handle. sqlite3_stmt is just like a cursor to a database.
sqlite3_open function needs the address of the sqlite3 database instance on the disk. The second parameter is the pointer to the pointer to sqlite3 structure. One mistake which I stumbled upon was to create a sqlite3 ** handle and then pass it to this function. The correct way is to create a sqlite3* handle and then pass the pointer to it using the & operator
// Create the SQL query for creating a table
char create_table[100] = “CREATE TABLE IF NOT EXISTS users (uname TEXT PRIMARY KEY,pass TEXT NOT NULL,activated INTEGER)”;
// Execute the query for creating the table
retval = sqlite3_exec(handle,create_table,0,0,0);
// Insert first row and second row
queries[ind++] = “INSERT INTO users VALUES(‘manish’,'manish’,1)”;
retval = sqlite3_exec(handle,queries[ind-1],0,0,0);
queries[ind++] = “INSERT INTO users VALUES(‘mehul’,'pulsar’,0)”;
retval = sqlite3_exec(handle,queries[ind-1],0,0,0);
Create a table if it does not exist and then insert two rows. Note
that sqlite3 does not support inserting two rows in one single query.
Maybe I need to confirm this fact again, but I never worked for me ever.
// select those rows from the table
queries[ind++] = “SELECT * from users”;
retval = sqlite3_prepare_v2(handle,queries[ind-1],-1,&stmt,0);
if(retval)
{
printf(“Selecting data from DB Failed\n”);
return -1;
}
// Read the number of rows fetched
int cols = sqlite3_column_count(stmt);
Create a prepared statement for fetching data from the database usingsqlite3_prepare_v2 function call. The first parameter is the database handle itself which is a sqlite3* pointer.
The second parameter is the SQL statement which needs to be executed.
The third parameter tells upto how long the second parameter to be read.
Pass -1 to make it read till line terminator. Fourth statement is the
pointer to pointer to prepared statement structure. Take care of the
pointer concept as I told about sqlite3 structure. The fifth parameter
is filled with the unused portion of the query. Have a look at the official documentation.
sqlite3_column_count function gets the number of columns for the result fetched.
while(1)
{
// fetch a row’s status
retval = sqlite3_step(stmt);
if(retval == SQLITE_ROW)
{
// SQLITE_ROW means fetched a row
// sqlite3_column_text returns a const void* , typecast it to const char*
for(int col=0 ; col
{
const char *val = (const char*)sqlite3_column_text(stmt,col);
printf(“%s = %s\t”,sqlite3_column_name(stmt,col),val);
}
printf(“\n”);
}
else if(retval == SQLITE_DONE)
{
// All rows finished
printf(“All rows fetched\n”);
break;
}
else
{
// Some error encountered
printf(“Some error encountered\n”);
return -1;
}
}
We have put this code in infinite while loop as we are not sure how
much rows it contains. Usually, the table returns n+1 rows, where 1
extra row is for telling that all rows have been fetched. sqlite3_step
returns the status which is actually an enumeration. Check all the results contants here. Two most used are SQLITE_DONE, SQLITE_ROW.
The former tells that all the rows have been fetched, now the user can
come out of this loop and continue. SQLITE_ROW tells that a valid row
has been fetched.
// Close the handle to free memory
sqlite3_close(handle);
return 0;
}
sqlite3_close simply closes the database connection.
Save the code in a file named, say dataman.c , compile it using the command
$ gcc dataman.c -o dataman -l sqlite –std=c99
You obviously need to have sqlite development headers installed for compiling the same. The name of the package on Ubuntu is libsqlite3-dev
Official SQLite Documentation
参考：
快速入门 http://www.sqlite.org/sqlite.html
“SQLite header and source version mismatch” http://jianshusoft.blog.51cto.com/2380869/824575
c语言的较为详细的例子 http://milky.manishsinha.net/2009/03/30/sqlite-with-c/
内容来自用户分享和网络整理，不保证内容的准确性，如有侵权内容，可联系管理员处理 
相关文章推荐
- SQLite/嵌入式数据库
- 解决MySQL链接不上问题
- MS SQL Server 无法添加、更新或删除从msx服务器上发起的作业（或其步骤或调度）
- MySQL 常用命令行
- MySQL 索引
- MS SQL 2000 分配权限
- FoxPro 数据库文件及记录命令
- FoxPro 打开文件及使用SQL查询
- MS SQL 流程控制语句
- redis 学习笔记
- 第九篇 SQL Server安全透明数据加密
- window下php5.6-x64-ts可用php_redis.dll文件
- sqlite使用
- MySQL生成随机整数
- SQL分页语句
- 远程连接MySQL， 10038问题
- MariaDB 5.5.44 for CentOS7 简单安装
- Oracle主要学习资源绝对干货-DBA之路
- SQLCMD
- 使用Spring-Data-Redis存储对象(redisTemplate)