POJ 1459 Power Network
2015-08-17 10:20
260 查看
Description:
A power network consists of nodes (power stations, consumers and dispatchers) connected by power transport lines. A node u may be supplied with an amount s(u) >= 0 of power, may produce an amount 0 <= p(u) <= pmax(u) of power, may consume an amount 0 <= c(u) <= min(s(u),cmax(u)) of power, and may deliver an amount d(u)=s(u)+p(u)-c(u) of power. The following restrictions apply: c(u)=0 for any power station, p(u)=0 for any consumer, and p(u)=c(u)=0 for any dispatcher. There is at most one power transport line (u,v) from a node u to a node v in the net; it transports an amount 0 <= l(u,v) <= lmax(u,v) of power delivered by u to v. Let Con=Σuc(u) be the power consumed in the net. The problem is to compute the maximum value of Con.
An example is in figure 1. The label x/y of power station u shows that p(u)=x and pmax(u)=y. The label x/y of consumer u shows that c(u)=x and cmax(u)=y. The label x/y of power transport line (u,v) shows that l(u,v)=x and lmax(u,v)=y. The power consumed is Con=6. Notice that there are other possible states of the network but the value of Con cannot exceed 6.
Input:
There are several data sets in the input. Each data set encodes a power network. It starts with four integers: 0 <= n <= 100 (nodes), 0 <= np <= n (power stations), 0 <= nc <= n (consumers), and 0 <= m <= n^2 (power transport lines). Follow m data triplets (u,v)z, where u and v are node identifiers (starting from 0) and 0 <= z <= 1000 is the value of lmax(u,v). Follow np doublets (u)z, where u is the identifier of a power station and 0 <= z <= 10000 is the value of pmax(u). The data set ends with nc doublets (u)z, where u is the identifier of a consumer and 0 <= z <= 10000 is the value of cmax(u). All input numbers are integers. Except the (u,v)z triplets and the (u)z doublets, which do not contain white spaces, white spaces can occur freely in input. Input data terminate with an end of file and are correct.
Output:
For each data set from the input, the program prints on the standard output the maximum amount of power that can be consumed in the corresponding network. Each result has an integral value and is printed from the beginning of a separate line.
Sample Input:
Sample Output:
Hint:
The sample input contains two data sets. The first data set encodes a network with 2 nodes, power station 0 with pmax(0)=15 and consumer 1 with cmax(1)=20, and 2 power transport lines with lmax(0,1)=20 and lmax(1,0)=10. The maximum value of Con is 15. The second data set encodes the network from figure 1.
题意:有m条电线,np个发电厂,nc个耗电厂,(u,v)z表示从u点能传到v点的电量是z,np个(u)z表示u点最多发电z,nc个(u)z表示u点最多消耗电量z,问消耗的最大电量是多少。
注意输入
A power network consists of nodes (power stations, consumers and dispatchers) connected by power transport lines. A node u may be supplied with an amount s(u) >= 0 of power, may produce an amount 0 <= p(u) <= pmax(u) of power, may consume an amount 0 <= c(u) <= min(s(u),cmax(u)) of power, and may deliver an amount d(u)=s(u)+p(u)-c(u) of power. The following restrictions apply: c(u)=0 for any power station, p(u)=0 for any consumer, and p(u)=c(u)=0 for any dispatcher. There is at most one power transport line (u,v) from a node u to a node v in the net; it transports an amount 0 <= l(u,v) <= lmax(u,v) of power delivered by u to v. Let Con=Σuc(u) be the power consumed in the net. The problem is to compute the maximum value of Con.
An example is in figure 1. The label x/y of power station u shows that p(u)=x and pmax(u)=y. The label x/y of consumer u shows that c(u)=x and cmax(u)=y. The label x/y of power transport line (u,v) shows that l(u,v)=x and lmax(u,v)=y. The power consumed is Con=6. Notice that there are other possible states of the network but the value of Con cannot exceed 6.
Input:
There are several data sets in the input. Each data set encodes a power network. It starts with four integers: 0 <= n <= 100 (nodes), 0 <= np <= n (power stations), 0 <= nc <= n (consumers), and 0 <= m <= n^2 (power transport lines). Follow m data triplets (u,v)z, where u and v are node identifiers (starting from 0) and 0 <= z <= 1000 is the value of lmax(u,v). Follow np doublets (u)z, where u is the identifier of a power station and 0 <= z <= 10000 is the value of pmax(u). The data set ends with nc doublets (u)z, where u is the identifier of a consumer and 0 <= z <= 10000 is the value of cmax(u). All input numbers are integers. Except the (u,v)z triplets and the (u)z doublets, which do not contain white spaces, white spaces can occur freely in input. Input data terminate with an end of file and are correct.
Output:
For each data set from the input, the program prints on the standard output the maximum amount of power that can be consumed in the corresponding network. Each result has an integral value and is printed from the beginning of a separate line.
Sample Input:
2 1 1 2 (0,1)20 (1,0)10 (0)15 (1)20 7 2 3 13 (0,0)1 (0,1)2 (0,2)5 (1,0)1 (1,2)8 (2,3)1 (2,4)7 (3,5)2 (3,6)5 (4,2)7 (4,3)5 (4,5)1 (6,0)5 (0)5 (1)2 (3)2 (4)1 (5)4
Sample Output:
15 6
Hint:
The sample input contains two data sets. The first data set encodes a network with 2 nodes, power station 0 with pmax(0)=15 and consumer 1 with cmax(1)=20, and 2 power transport lines with lmax(0,1)=20 and lmax(1,0)=10. The maximum value of Con is 15. The second data set encodes the network from figure 1.
题意:有m条电线,np个发电厂,nc个耗电厂,(u,v)z表示从u点能传到v点的电量是z,np个(u)z表示u点最多发电z,nc个(u)z表示u点最多消耗电量z,问消耗的最大电量是多少。
注意输入
#include<stdio.h> #include<string.h> #include<queue> #include<algorithm> using namespace std; const int INF=0x3f3f3f3f; const int N=110; int G , layer , a, b, c, A, B; void Change(char s[]) { int i; for (i = 0; s[i] != '\0'; i++) { if (s[i] == ',') A = i; if (s[i] == ')') B = i; } for (i = 1; i < A; i++) a = a*10 + (s[i]-'0'); for (i = A+1; i < B; i++) b = b*10 + (s[i]-'0'); for (i = B+1; s[i] != '\0'; i++) c = c*10 + (s[i]-'0'); } int BFS(int Start, int End) { int i, u; queue<int>Q; memset(layer, 0, sizeof(layer)); Q.push(Start); layer[Start] = 1; while (!Q.empty()) { u = Q.front(); Q.pop(); if (u == End) return 1; for (i = 0; i <= End; i++) { if (G[u][i] && !layer[i]) { layer[i] = layer[u]+1; Q.push(i); } } } return 0; } int DFS(int u, int End, int mini) { int i, ans, con = 0; if (u == End) return mini; for (i = 0; i <= End; i++) { if (G[u][i] && layer[i] == layer[u]+1) { ans = min(G[u][i], mini-con); ans = DFS(i, End, ans); G[u][i] -= ans; G[i][u] += ans; con += ans; if (con == mini) break; } } if (con == 0) layer[u] = 0; return con; } int Dinic(int Start, int End) { int ans = 0; while (BFS(Start, End)) ans += DFS(Start, End, INF); return ans; } int main () { int n, np, nc, m, S, E, ans; char s[30]; while (scanf("%d%d%d%d", &n, &np, &nc, &m) != EOF) { S = n; E = n+1; memset(G, 0, sizeof(G)); while (m--) { a = b = c = A = B = 0; scanf("%s", s); Change(s); G[a][b] += c; } while (np--) { a = b = c = A = B = 0; scanf("%s", s); Change(s); G[S][b] += c; } while (nc--) { a = b = c = A = B = 0; scanf("%s", s); Change(s); G[b][E] += c; } ans = Dinic(S, E); printf("%d\n", ans); } return 0; }
相关文章推荐
- 机器学习中的数学(1)-回归(regression)、梯度下降(gradient descent)
- js的方法
- VC++动态链接库(DLL)编程深入浅出(zz)
- Sql Server 常用系统存储过程大全
- poj 2229 dp(分解为2的幂)
- C/C++中extern关键字详解
- HasnMap中的键
- Verilog--奇数分频与偶数分频及占空比
- 黑色笼罩中国联通:半年流失近千万用户 4G发展停滞不前---OFweek
- PHP遍历文件夹内容
- 欢迎使用CSDN-markdown编辑器
- OA请假流程 -- 编码
- 向前兼容、向后兼容
- 机器学习中的数学(4)-线性判别分析(LDA), 主成分分析(PCA)
- D3.js中data(), enter() 和 exit()的问题详解
- Android的CPP代码都加了namespace android
- 数字计算次数问题实例
- 管理中的外行与内行
- 战国评论(三)---一起
- net里面using的使用