HDU 3681 Prison Break
2015-07-18 23:13
429 查看
Problem Description
Rompire is a robot kingdom and a lot of robots live there peacefully. But one day, the king of Rompire was captured by human beings. His thinking circuit was changed by human and thus became a tyrant. All those who are against him were put into jail, includingour clever Micheal#1. Now it’s time to escape, but Micheal#1 needs an optimal plan and he contacts you, one of his human friends, for help.
The jail area is a rectangle contains n×m little grids, each grid might be one of the following:
1) Empty area, represented by a capital letter ‘S’.
2) The starting position of Micheal#1, represented by a capital letter ‘F’.
3) Energy pool, represented by a capital letter ‘G’. When entering an energy pool, Micheal#1 can use it to charge his battery ONLY ONCE. After the charging, Micheal#1’s battery will become FULL and the energy pool will become an empty area. Of course, passing
an energy pool without using it is allowed.
4) Laser sensor, represented by a capital letter ‘D’. Since it is extremely sensitive, Micheal#1 cannot step into a grid with a laser sensor.
5) Power switch, represented by a capital letter ‘Y’. Once Micheal#1 steps into a grid with a Power switch, he will certainly turn it off.
In order to escape from the jail, Micheal#1 need to turn off all the power switches to stop the electric web on the roof—then he can just fly away. Moving to an adjacent grid (directly up, down, left or right) will cost 1 unit of energy and only moving operation
costs energy. Of course, Micheal#1 cannot move when his battery contains no energy.
The larger the battery is, the more energy it can save. But larger battery means more weight and higher probability of being found by the weight sensor. So Micheal#1 needs to make his battery as small as possible, and still large enough to hold all energy he
need. Assuming that the size of the battery equals to maximum units of energy that can be saved in the battery, and Micheal#1 is fully charged at the beginning, Please tell him the minimum size of the battery needed for his Prison break.
Input
Input contains multiple test cases, ended by 0 0. For each test case, the first line contains two integer numbers n and m showing the size of the jail. Next n lines consist of m capital letters each, which stands for the description of the jail.You can assumethat 1<=n,m<=15, and the sum of energy pools and power switches is less than 15.
Output
For each test case, output one integer in a line, representing the minimum size of the battery Micheal#1 needs. If Micheal#1 can’t escape, output -1.
Sample Input
5 5 GDDSS SSSFS SYGYS SGSYS SSYSS 0 0
Sample Output
4二分+dp验证
#include<cstdio> #include<algorithm> #include<iostream> #include<queue> #include<cstring> using namespace std; const int maxn=20; int n,m,t1,t2,ans; int a[maxn],b[maxn],c[maxn][maxn],dis[maxn][maxn]; int f[1<<16][16],u[1<<16][16]; char s[maxn][maxn]; struct point { int x,y,d; point(int x=0,int y=0,int d=0):x(x),y(y),d(d){}; }; void bfs(int x,int y) { int map[maxn][maxn]; memset(map,0,sizeof(map)); queue<point> p; int now=c[x][y]-1; for (int i=0;i<t2;i++) dis[now][i]=-1; p.push(point(x,y,0)); while (!p.empty()) { point q=p.front(); p.pop(); if (map[q.x][q.y]) continue; map[q.x][q.y]=1; if (c[q.x][q.y]>0) dis[now][c[q.x][q.y]-1]=q.d; if (c[q.x][q.y]>-1) { p.push(point(q.x-1,q.y,q.d+1)); p.push(point(q.x,q.y-1,q.d+1)); p.push(point(q.x+1,q.y,q.d+1)); p.push(point(q.x,q.y+1,q.d+1)); } } } bool prove(int x) { n=(1<<t1)-1; m=(1<<t2)-1; memset(f,-1,sizeof(f)); f[1][0]=x; for (int i=1;i<=m;i+=2) { for (int j=0;j<t2;j++) if ((i&(1<<j))&&f[i][j]!=-1) for (int k=1;k<t2;k++) if (((i|(1<<k))>i)&&dis[j][k]!=-1&&f[i][j]>=dis[j][k]) { if ((f[i|(1<<k)][k]==-1)||(f[i|(1<<k)][k]<f[i][j]-dis[j][k])) { f[i|(1<<k)][k]=f[i][j]-dis[j][k]; if (k>=t1) f[i|(1<<k)][k]=x; if (((i|(1<<k))&n)==n) return true; } } } return false; } int ef() { int q,h,mid,ans=-1; for (q=1,h=m*n*t2;q<=h;) { mid=(q+h)>>1; if (prove(mid)) {h=mid-1; ans=mid;}else q=mid+1; } return ans; } int main() { while (cin>>n>>m,n+m) { t1=t2=0; memset(c,-1,sizeof(c)); for (int i=1;i<=n;i++) scanf("%s",s[i]+1); for (int i=1;i<=n;i++) for (int j=1;j<=m;j++) if (s[i][j]=='F') { a[t2]=i,b[t2++]=j; c[i][j]=t2; } else if (s[i][j]=='S') c[i][j]=0; for (int i=1;i<=n;i++) for (int j=1;j<=m;j++) if (s[i][j]=='Y') { a[t2]=i,b[t2++]=j; c[i][j]=t2; } t1=t2; for (int i=1;i<=n;i++) for (int j=1;j<=m;j++) if (s[i][j]=='G') { a[t2]=i,b[t2++]=j; c[i][j]=t2; } for (int i=0;i<t2;i++) bfs(a[i],b[i]); cout<<ef()<<endl; } return 0; }
相关文章推荐
- C#操作数据库中的数据常用方法
- Androd UI学习之ImageSwitcher
- 怎样删除WIN7桌面上的IE图标
- Linux 远程连接命令
- 在Ubuntu 14.04 64bit上安装Master PDF Editor 3.2.81
- 运用C#读取导入的Excel部分数据为空的解决方法
- RadioGroup、RadioButton、CheckBox、Toast用法
- [BZOJ1058][ZJOI2007]报表统计
- 双向循环链表
- c++虚函数表解析
- GCD多线程的使用(二)
- 深入分析Cocos2d-x 2.0中的“纹理”
- Markdown 的一个例子
- #24 Swap Nodes in Pairs
- iOS bug处理
- JS Call()与Apply()
- java对字符的编码处理
- SpringMVC入门配置web.config及applicationContent-mvc.xml
- 转:线程池原理及创建(C++实现)
- word中的图片如何导入博客?