ZOJ1041 Transmitters
2015-07-09 18:58
288 查看
Transmitters
Time Limit: 2 Seconds Memory Limit: 65536 KB
In a wireless network with multiple transmitters sending on the same frequencies, it is often a requirement that signals don't overlap, or at least that they don't conflict. One way of
accomplishing this is to restrict a transmitter's coverage area. This problem uses a shielded transmitter that only broadcasts in a semicircle.
A transmitter T is located somewhere on a 1,000 square meter grid. It broadcasts in a semicircular area of radius r. The transmitter may be rotated any amount, but not moved. Given N points anywhere on the grid, compute the maximum number of points that can
be simultaneously reached by the transmitter's signal. Figure 1 shows the same data points with two different transmitter rotations.
All input coordinates are integers (0-1000). The radius is a positive real number greater than 0. Points on the boundary of a semicircle are considered within that semicircle. There are 1-150 unique points to examine per transmitter. No points are at the same
location as the transmitter.
Input consists of information for one or more independent transmitter problems. Each problem begins with one line containing the (x,y) coordinates of the transmitter followed by the broadcast radius, r. The next line contains the number of points N on the grid,
followed by N sets of (x,y) coordinates, one set per line. The end of the input is signalled by a line with a negative radius; the (x,y) values will be present but indeterminate. Figures 1 and 2 represent the data in the first two example data sets below,
though they are on different scales. Figures 1a and 2 show transmitter rotations that result in maximal coverage.
For each transmitter, the output contains a single line with the maximum number of points that can be contained in some semicircle.
Example input:
25 25 3.5
7
25 28
23 27
27 27
24 23
26 23
24 29
26 29
350 200 2.0
5
350 202
350 199
350 198
348 200
352 200
995 995 10.0
4
1000 1000
999 998
990 992
1000 999
100 100 -2.5
Example output:
3
4
4
题意:用一个固定圆心坐标和半径的半圆去覆盖点,问最多能覆盖的数量
Time Limit: 2 Seconds Memory Limit: 65536 KB
In a wireless network with multiple transmitters sending on the same frequencies, it is often a requirement that signals don't overlap, or at least that they don't conflict. One way of
accomplishing this is to restrict a transmitter's coverage area. This problem uses a shielded transmitter that only broadcasts in a semicircle.
A transmitter T is located somewhere on a 1,000 square meter grid. It broadcasts in a semicircular area of radius r. The transmitter may be rotated any amount, but not moved. Given N points anywhere on the grid, compute the maximum number of points that can
be simultaneously reached by the transmitter's signal. Figure 1 shows the same data points with two different transmitter rotations.
All input coordinates are integers (0-1000). The radius is a positive real number greater than 0. Points on the boundary of a semicircle are considered within that semicircle. There are 1-150 unique points to examine per transmitter. No points are at the same
location as the transmitter.
Input consists of information for one or more independent transmitter problems. Each problem begins with one line containing the (x,y) coordinates of the transmitter followed by the broadcast radius, r. The next line contains the number of points N on the grid,
followed by N sets of (x,y) coordinates, one set per line. The end of the input is signalled by a line with a negative radius; the (x,y) values will be present but indeterminate. Figures 1 and 2 represent the data in the first two example data sets below,
though they are on different scales. Figures 1a and 2 show transmitter rotations that result in maximal coverage.
For each transmitter, the output contains a single line with the maximum number of points that can be contained in some semicircle.
Example input:
25 25 3.5
7
25 28
23 27
27 27
24 23
26 23
24 29
26 29
350 200 2.0
5
350 202
350 199
350 198
348 200
352 200
995 995 10.0
4
1000 1000
999 998
990 992
1000 999
100 100 -2.5
Example output:
3
4
4
题意:用一个固定圆心坐标和半径的半圆去覆盖点,问最多能覆盖的数量
#include <bits/stdc++.h> using namespace std; const int N = 205; int x, y; double r; int n; int ax ,ay ; int num1,num2; void fun(int i,int j) { int tmp=(ax[i]-x)*(ay[j]-y)-(ax[j]-x)*(ay[i]-y); //两个向量的叉积,a=(x1,y1) b=(x2,y2) //c=a X b=x1*y2-x2*y1 //如果c>0,表示向量a逆时针到向量b小于PI //如果c<0,表示向量a顺时针到向量b小于PI if(tmp==0) { num1++; num2++; } else if(tmp>0) num1++; else num2++; } int main() { while(~scanf("%d%d%lf",&x,&y,&r)) { if(r<0) break; scanf("%d",&n); int cnt=0; int a,b; for(int i=0;i<n;i++) { scanf("%d%d",&a,&b); if((a-x)*(a-x)+(b-y)*(b-y)>r*r) continue; ax[cnt]=a;ay[cnt++]=b; } int ans=0; for(int i=0;i<cnt;i++) { num1=0; num2=0; for(int j=0;j<cnt;j++) { fun(i,j); } ans=max(ans,num1); ans=max(ans,num2); } printf("%d\n",ans); } return 0; }
相关文章推荐
- Linux中fdisk命令
- C++ HOJ 猴子分桃
- canvas 基础知识整理(二)
- APNS - Apple Push Notification Service
- 移动产品经理需要跟踪app的哪些数据?
- javascript笔记05:函数表达式和函数语句的区别
- asp.net 中RadioButtonList的选项改变事件处理(采用jquery操作)
- STL算法设计理念 - 谓词,一元谓词demo
- NYOJ 46-最少乘法次数(数论)
- 自定义的div弹出窗口
- STL算法设计理念 - 谓词,一元谓词demo
- WordPress 插件推荐
- 杨辉三角
- MSP430F149学习之路——PWM信号
- CentOS 6.5配置SSH免密码登录
- poj 2503 Babelfish
- Android Studio好处(与eclipse相比)
- 关于网页右下角总出广告解决办法
- 三极管典型开关电路
- maven导出项目依赖的jar包