poj1573 模拟
2015-07-07 23:02
316 查看
Robot Motion
Description
A robot has been programmed to follow the instructions in its path. Instructions for the next direction the robot is to move are laid down in a grid. The possible instructions are
N north (up the page)
S south (down the page)
E east (to the right on the page)
W west (to the left on the page)
For example, suppose the robot starts on the north (top) side of Grid 1 and starts south (down). The path the robot follows is shown. The robot goes through 10 instructions in the grid before leaving the grid.
Compare what happens in Grid 2: the robot goes through 3 instructions only once, and then starts a loop through 8 instructions, and never exits.
You are to write a program that determines how long it takes a robot to get out of the grid or how the robot loops around.
Input
There will be one or more grids for robots to navigate. The data for each is in the following form. On the first line are three integers separated by blanks: the number of rows in the grid, the number of columns in the grid, and the number of the column in which the robot enters from the north. The possible entry columns are numbered starting with one at the left. Then come the rows of the direction instructions. Each grid will have at least one and at most 10 rows and columns of instructions. The lines of instructions contain only the characters N, S, E, or W with no blanks. The end of input is indicated by a row containing 0 0 0.
Output
For each grid in the input there is one line of output. Either the robot follows a certain number of instructions and exits the grid on any one the four sides or else the robot follows the instructions on a certain number of locations once, and then the instructions on some number of locations repeatedly. The sample input below corresponds to the two grids above and illustrates the two forms of output. The word "step" is always immediately followed by "(s)" whether or not the number before it is 1.
Sample Input
Sample Output
#include<stdio.h>
#include<string.h>
char map[100][100];
int vis[100][100];
int flag;
int x,y,h;
void dfs(int tx,int ty){
if(flag==1)
return;
if(map[tx][ty]=='N')
tx-=1;
else if(map[tx][ty]=='S')
tx+=1;
else if(map[tx][ty]=='W')
ty-=1;
else if(map[tx][ty]=='E')
ty+=1;
if(tx<1||tx>x||ty<1||ty>y)
return;
if(vis[tx][ty]==0){
vis[tx][ty]=1;
dfs(tx,ty);
}
else if(vis[tx][ty]==1){
vis[tx][ty]=2;
dfs(tx,ty);
}
else {
flag=1;
return;
}
}
int main(){
while(scanf("%d%d%d",&x,&y,&h)!=EOF){
if(x==0&&y==0&&h==0)
break;
memset(vis,0,sizeof(vis));
memset(map,0,sizeof(map));
getchar();
for(int i=1;i<=x;i++)
gets(map[i]+1);
int tx=1,ty=h;
flag=0;
vis[tx][ty]=1;
dfs(tx,ty);
int sum1=0,sum2=0;
for(int i=1;i<=x;i++){
for(int j=1;j<=y;j++){
if(vis[i][j]==1)
sum1++;
else if(vis[i][j]==2)
sum2++;
}
}
if(sum2==0)
printf("%d step(s) to exit\n",sum1);
else
printf("%d step(s) before a loop of %d step(s)\n",sum1,sum2);
}
return 0;
}
Time Limit: 1000MS | Memory Limit: 10000K | |
Total Submissions: 11270 | Accepted: 5487 |
A robot has been programmed to follow the instructions in its path. Instructions for the next direction the robot is to move are laid down in a grid. The possible instructions are
N north (up the page)
S south (down the page)
E east (to the right on the page)
W west (to the left on the page)
For example, suppose the robot starts on the north (top) side of Grid 1 and starts south (down). The path the robot follows is shown. The robot goes through 10 instructions in the grid before leaving the grid.
Compare what happens in Grid 2: the robot goes through 3 instructions only once, and then starts a loop through 8 instructions, and never exits.
You are to write a program that determines how long it takes a robot to get out of the grid or how the robot loops around.
Input
There will be one or more grids for robots to navigate. The data for each is in the following form. On the first line are three integers separated by blanks: the number of rows in the grid, the number of columns in the grid, and the number of the column in which the robot enters from the north. The possible entry columns are numbered starting with one at the left. Then come the rows of the direction instructions. Each grid will have at least one and at most 10 rows and columns of instructions. The lines of instructions contain only the characters N, S, E, or W with no blanks. The end of input is indicated by a row containing 0 0 0.
Output
For each grid in the input there is one line of output. Either the robot follows a certain number of instructions and exits the grid on any one the four sides or else the robot follows the instructions on a certain number of locations once, and then the instructions on some number of locations repeatedly. The sample input below corresponds to the two grids above and illustrates the two forms of output. The word "step" is always immediately followed by "(s)" whether or not the number before it is 1.
Sample Input
3 6 5 NEESWE WWWESS SNWWWW 4 5 1 SESWE EESNW NWEEN EWSEN 0 0 0
Sample Output
10 step(s) to exit 3 step(s) before a loop of 8 step(s) 没什么可说的,做不出来可以考虑退出ACM了
#include<stdio.h>
#include<string.h>
char map[100][100];
int vis[100][100];
int flag;
int x,y,h;
void dfs(int tx,int ty){
if(flag==1)
return;
if(map[tx][ty]=='N')
tx-=1;
else if(map[tx][ty]=='S')
tx+=1;
else if(map[tx][ty]=='W')
ty-=1;
else if(map[tx][ty]=='E')
ty+=1;
if(tx<1||tx>x||ty<1||ty>y)
return;
if(vis[tx][ty]==0){
vis[tx][ty]=1;
dfs(tx,ty);
}
else if(vis[tx][ty]==1){
vis[tx][ty]=2;
dfs(tx,ty);
}
else {
flag=1;
return;
}
}
int main(){
while(scanf("%d%d%d",&x,&y,&h)!=EOF){
if(x==0&&y==0&&h==0)
break;
memset(vis,0,sizeof(vis));
memset(map,0,sizeof(map));
getchar();
for(int i=1;i<=x;i++)
gets(map[i]+1);
int tx=1,ty=h;
flag=0;
vis[tx][ty]=1;
dfs(tx,ty);
int sum1=0,sum2=0;
for(int i=1;i<=x;i++){
for(int j=1;j<=y;j++){
if(vis[i][j]==1)
sum1++;
else if(vis[i][j]==2)
sum2++;
}
}
if(sum2==0)
printf("%d step(s) to exit\n",sum1);
else
printf("%d step(s) before a loop of %d step(s)\n",sum1,sum2);
}
return 0;
}
相关文章推荐
- linux中描述符和标准IO流对文件的基本操作
- Spring学习(15)--- 基于Java类的配置Bean 之 @Bean & @Scope 注解
- hdu 2571 命运
- js的数组ECMAScript 5加入的方法(二)
- hdoj 1083 Courses【匈牙利算法】
- 通过IF({1,0}和VLOOKUP函数实现Excel的双条件多条件查找
- 每天一个linux命令(10):cat 命令
- 2015-7-3,鼠标左键下下,或者空格按下
- 【麦可网】Cocos2d-X跨平台游戏开发学习笔记---第二十七课:Cocos2D-X物理引擎之chipmunk
- switch语句:适用于一个条件有多个分支的情况---分支语句
- JSP详解
- 程序员笔试经典题目拾粹001
- vs 调试
- 2015070708 - 修正笔记
- 一个适用于层级目录结构的makefile模版
- shell join 参数详细说明
- 实验五
- JAVA中的Formatter
- 第一章 面向对象软件工程与UML
- 类和结构的区别