FFmpeg的HEVC解码器源代码简单分析：解码器主干部分

=====================================================

HEVC源代码分析文章列表：

【解码 -libavcodec HEVC 解码器】

FFmpeg的HEVC解码器源代码简单分析：概述

FFmpeg的HEVC解码器源代码简单分析：解析器（Parser）部分

FFmpeg的HEVC解码器源代码简单分析：解码器主干部分

FFmpeg的HEVC解码器源代码简单分析：CTU解码（CTU Decode）部分-PU

FFmpeg的HEVC解码器源代码简单分析：CTU解码（CTU Decode）部分-TU

FFmpeg的HEVC解码器源代码简单分析：环路滤波（LoopFilter）

=====================================================

本文分析FFmpeg的libavcodec中的HEVC解码器的主干部分。“主干部分”是相对于“CTU解码”、 “环路滤波”这些细节部分而言的。它包含了HEVC解码器直到hls_decode_entry()前面的函数调用关系（hls_decode_entry()后面就是HEVC解码器的细节部分，主要包含了“CTU解码”、 “环路滤波”2个部分）。

函数调用关系图

FFmpeg HEVC解码器主干部分在整个HEVC解码器中的位置如下图所示。


单击查看更清晰的大图
HEVC解码器主干部分的源代码的调用关系如下图所示。


单击查看更清晰的大图
从图中可以看出，HEVC解码器初始化函数是hevc_decode_init()，解码函数是hevc_decode_frame()，关闭函数是hevc_decode_free()。其中hevc_decode_frame()调用了decode_nal_units()进行一帧NALU的解码，decode_nal_units()又调用了decode_nal_unit()进行一个NALU的解码。
decode_nal_unit()一方面调用解析函数ff_hevc_decode_nal_vps()，ff_hevc_decode_nal_sps()，ff_hevc_decode_nal_pps()等对VPS、SPS、PPS进行解析；另一方面调用了hls_slice_header()和hls_slice_data()对Slice数据进行解码。
hls_slice_data()中调用了hls_decode_entry()，在其中完成了Slice Data解码的流程。该流程包含了CU、PU、TU解码，环路滤波、SAO滤波等环节。

ff_hevc_decoder

ff_hevc_decoder是HEVC解码器对应的AVCodec结构体。该结构体的定义位于libavcodec\hevc.c，如下所示。

AVCodec ff_hevc_decoder = {
.name                  = "hevc",
.long_name             = NULL_IF_CONFIG_SMALL("HEVC (High Efficiency Video Coding)"),
.type                  = AVMEDIA_TYPE_VIDEO,
.id                    = AV_CODEC_ID_HEVC,
.priv_data_size        = sizeof(HEVCContext),
.priv_class            = &hevc_decoder_class,
.init                  = hevc_decode_init,
.close                 = hevc_decode_free,
.decode                = hevc_decode_frame,
.flush                 = hevc_decode_flush,
.update_thread_context = hevc_update_thread_context,
.init_thread_copy      = hevc_init_thread_copy,
.capabilities          = CODEC_CAP_DR1 | CODEC_CAP_DELAY |
CODEC_CAP_SLICE_THREADS | CODEC_CAP_FRAME_THREADS,
.profiles              = NULL_IF_CONFIG_SMALL(profiles),
};

从源代码可以看出，HEVC解码器初始化函数是hevc_decode_init()，解码函数是hevc_decode_frame()，关闭函数是hevc_decode_free()。

hevc_decode_init()

hevc_decode_init()用于初始化HEVC解码器。该函数的定义如下。

//初始化HEVC解码器
static av_cold int hevc_decode_init(AVCodecContext *avctx)
{
HEVCContext *s = avctx->priv_data;
int ret;

//初始化CABAC
ff_init_cabac_states();

avctx->internal->allocate_progress = 1;

//为HEVCContext中的变量分配内存空间
ret = hevc_init_context(avctx);
if (ret < 0)
return ret;

s->enable_parallel_tiles = 0;
s->picture_struct = 0;

if(avctx->active_thread_type & FF_THREAD_SLICE)
s->threads_number = avctx->thread_count;
else
s->threads_number = 1;

//如果AVCodecContext中包含extradata，则解码之
if (avctx->extradata_size > 0 && avctx->extradata) {
ret = hevc_decode_extradata(s);
if (ret < 0) {
hevc_decode_free(avctx);
return ret;
}
}

if((avctx->active_thread_type & FF_THREAD_FRAME) && avctx->thread_count > 1)
s->threads_type = FF_THREAD_FRAME;
else
s->threads_type = FF_THREAD_SLICE;

return 0;
}

从源代码中可以看出，hevc_decode_init()对HEVCContext中的变量做了一些初始化工作。其中调用了一个函数hevc_init_context()用于给HEVCContext中的变量分配内存空间。

hevc_init_context()

hevc_init_context()用于给HEVCContext中的变量分配内存空间。该函数的定义如下所示。

//为HEVCContext中的变量分配内存空间
static av_cold int hevc_init_context(AVCodecContext *avctx)
{
HEVCContext *s = avctx->priv_data;
int i;

s->avctx = avctx;

s->HEVClc = av_mallocz(sizeof(HEVCLocalContext));
if (!s->HEVClc)
goto fail;
s->HEVClcList[0] = s->HEVClc;
s->sList[0] = s;

s->cabac_state = av_malloc(HEVC_CONTEXTS);
if (!s->cabac_state)
goto fail;

s->tmp_frame = av_frame_alloc();
if (!s->tmp_frame)
goto fail;

s->output_frame = av_frame_alloc();
if (!s->output_frame)
goto fail;

for (i = 0; i < FF_ARRAY_ELEMS(s->DPB); i++) {
s->DPB[i].frame = av_frame_alloc();
if (!s->DPB[i].frame)
goto fail;
s->DPB[i].tf.f = s->DPB[i].frame;
}

s->max_ra = INT_MAX;

s->md5_ctx = av_md5_alloc();
if (!s->md5_ctx)
goto fail;

ff_bswapdsp_init(&s->bdsp);

s->context_initialized = 1;
s->eos = 0;

return 0;

fail:
hevc_decode_free(avctx);
return AVERROR(ENOMEM);
}

hevc_decode_free()

hevc_decode_free()用于关闭HEVC解码器。该函数的定义如下所示。

//关闭HEVC解码器
static av_cold int hevc_decode_free(AVCodecContext *avctx)
{
HEVCContext       *s = avctx->priv_data;
int i;

pic_arrays_free(s);

av_freep(&s->md5_ctx);

for(i=0; i < s->nals_allocated; i++) {
av_freep(&s->skipped_bytes_pos_nal[i]);
}
av_freep(&s->skipped_bytes_pos_size_nal);
av_freep(&s->skipped_bytes_nal);
av_freep(&s->skipped_bytes_pos_nal);

av_freep(&s->cabac_state);

av_frame_free(&s->tmp_frame);
av_frame_free(&s->output_frame);

for (i = 0; i < FF_ARRAY_ELEMS(s->DPB); i++) {
ff_hevc_unref_frame(s, &s->DPB[i], ~0);
av_frame_free(&s->DPB[i].frame);
}

for (i = 0; i < FF_ARRAY_ELEMS(s->vps_list); i++)
av_buffer_unref(&s->vps_list[i]);
for (i = 0; i < FF_ARRAY_ELEMS(s->sps_list); i++)
av_buffer_unref(&s->sps_list[i]);
for (i = 0; i < FF_ARRAY_ELEMS(s->pps_list); i++)
av_buffer_unref(&s->pps_list[i]);
s->sps = NULL;
s->pps = NULL;
s->vps = NULL;

av_buffer_unref(&s->current_sps);

av_freep(&s->sh.entry_point_offset);
av_freep(&s->sh.offset);
av_freep(&s->sh.size);

for (i = 1; i < s->threads_number; i++) {
HEVCLocalContext *lc = s->HEVClcList[i];
if (lc) {
av_freep(&s->HEVClcList[i]);
av_freep(&s->sList[i]);
}
}
if (s->HEVClc == s->HEVClcList[0])
s->HEVClc = NULL;
av_freep(&s->HEVClcList[0]);

for (i = 0; i < s->nals_allocated; i++)
av_freep(&s->nals[i].rbsp_buffer);
av_freep(&s->nals);
s->nals_allocated = 0;

return 0;
}

从源代码可以看出，hevc_decode_free()释放了HEVCContext中的内存。

hevc_decode_frame()

hevc_decode_frame()是HEVC解码器中最关键的函数，用于解码一帧数据。该函数的定义如下所示。

/*
* 解码一帧数据
*
* 注释：雷霄骅
* leixiaohua1020@126.com
* http://blog.csdn.net/leixiaohua1020 *
*/
static int hevc_decode_frame(AVCodecContext *avctx, void *data, int *got_output,
AVPacket *avpkt)
{
int ret;
HEVCContext *s = avctx->priv_data;
//没有输入码流的时候，输出解码器中剩余数据
//对应“Flush Decoder”功能
if (!avpkt->size) {
//第3个参数flush取值为1
ret = ff_hevc_output_frame(s, data, 1);
if (ret < 0)
return ret;

*got_output = ret;
return 0;
}

s->ref = NULL;
//解码一帧数据
ret    = decode_nal_units(s, avpkt->data, avpkt->size);
if (ret < 0)
return ret;

/* verify the SEI checksum */
if (avctx->err_recognition & AV_EF_CRCCHECK && s->is_decoded &&
s->is_md5) {
ret = verify_md5(s, s->ref->frame);
if (ret < 0 && avctx->err_recognition & AV_EF_EXPLODE) {
ff_hevc_unref_frame(s, s->ref, ~0);
return ret;
}
}
s->is_md5 = 0;

if (s->is_decoded) {
av_log(avctx, AV_LOG_DEBUG, "Decoded frame with POC %d.\n", s->poc);
s->is_decoded = 0;
}

if (s->output_frame->buf[0]) {
//输出解码后数据
av_frame_move_ref(data, s->output_frame);
*got_output = 1;
}

return avpkt->size;
}

从源代码可以看出，hevc_decode_frame()根据输入的AVPacket的data是否为NULL分成两个情况：
下面看一下一帧NALU的解码函数decode_nal_units()。

decode_nal_units()

decode_nal_units()用于解码一帧NALU。该函数的定义如下所示。

//解码一帧数据
static int decode_nal_units(HEVCContext *s, const uint8_t *buf, int length)
{
int i, consumed, ret = 0;

s->ref = NULL;
s->last_eos = s->eos;
s->eos = 0;

/* split the input packet into NAL units, so we know the upper bound on the
* number of slices in the frame */
s->nb_nals = 0;
while (length >= 4) {
HEVCNAL *nal;
int extract_length = 0;

if (s->is_nalff) {
int i;
for (i = 0; i < s->nal_length_size; i++)
extract_length = (extract_length << 8) | buf[i];
buf    += s->nal_length_size;
length -= s->nal_length_size;

if (extract_length > length) {
av_log(s->avctx, AV_LOG_ERROR, "Invalid NAL unit size.\n");
ret = AVERROR_INVALIDDATA;
goto fail;
}
} else {
/* search start code */
//查找起始码0x000001
while (buf[0] != 0 || buf[1] != 0 || buf[2] != 1) {
++buf;
--length;
if (length < 4) {
av_log(s->avctx, AV_LOG_ERROR, "No start code is found.\n");
ret = AVERROR_INVALIDDATA;
goto fail;
}
}
//找到后，跳过起始码（3Byte）
buf           += 3;
length        -= 3;
}

if (!s->is_nalff)
extract_length = length;

if (s->nals_allocated < s->nb_nals + 1) {
int new_size = s->nals_allocated + 1;
HEVCNAL *tmp = av_realloc_array(s->nals, new_size, sizeof(*tmp));
if (!tmp) {
ret = AVERROR(ENOMEM);
goto fail;
}
s->nals = tmp;
memset(s->nals + s->nals_allocated, 0,
(new_size - s->nals_allocated) * sizeof(*tmp));
av_reallocp_array(&s->skipped_bytes_nal, new_size, sizeof(*s->skipped_bytes_nal));
av_reallocp_array(&s->skipped_bytes_pos_size_nal, new_size, sizeof(*s->skipped_bytes_pos_size_nal));
av_reallocp_array(&s->skipped_bytes_pos_nal, new_size, sizeof(*s->skipped_bytes_pos_nal));
s->skipped_bytes_pos_size_nal[s->nals_allocated] = 1024; // initial buffer size
s->skipped_bytes_pos_nal[s->nals_allocated] = av_malloc_array(s->skipped_bytes_pos_size_nal[s->nals_allocated], sizeof(*s->skipped_bytes_pos));
s->nals_allocated = new_size;
}
s->skipped_bytes_pos_size = s->skipped_bytes_pos_size_nal[s->nb_nals];
s->skipped_bytes_pos = s->skipped_bytes_pos_nal[s->nb_nals];
nal = &s->nals[s->nb_nals];

consumed = ff_hevc_extract_rbsp(s, buf, extract_length, nal);

s->skipped_bytes_nal[s->nb_nals] = s->skipped_bytes;
s->skipped_bytes_pos_size_nal[s->nb_nals] = s->skipped_bytes_pos_size;
s->skipped_bytes_pos_nal[s->nb_nals++] = s->skipped_bytes_pos;

if (consumed < 0) {
ret = consumed;
goto fail;
}

ret = init_get_bits8(&s->HEVClc->gb, nal->data, nal->size);
if (ret < 0)
goto fail;
hls_nal_unit(s);

if (s->nal_unit_type == NAL_EOB_NUT ||
s->nal_unit_type == NAL_EOS_NUT)
s->eos = 1;

buf    += consumed;
length -= consumed;
}

/* parse the NAL units */
for (i = 0; i < s->nb_nals; i++) {
int ret;
s->skipped_bytes = s->skipped_bytes_nal[i];
s->skipped_bytes_pos = s->skipped_bytes_pos_nal[i];
//解码NALU
ret = decode_nal_unit(s, s->nals[i].data, s->nals[i].size);
if (ret < 0) {
av_log(s->avctx, AV_LOG_WARNING,
"Error parsing NAL unit #%d.\n", i);
goto fail;
}
}

fail:
if (s->ref && s->threads_type == FF_THREAD_FRAME)
ff_thread_report_progress(&s->ref->tf, INT_MAX, 0);

return ret;
}

从源代码可以看出，decode_nal_units()中又调用了另一个函数decode_nal_unit()，两者的名字只相差一个“s”。由此可以看出decode_nal_unit()作用是解码一个NALU。

decode_nal_unit()

decode_nal_unit()用于解码一个NALU。该函数的定义如下所示。

//解码一个NALU
static int decode_nal_unit(HEVCContext *s, const uint8_t *nal, int length)
{
HEVCLocalContext *lc = s->HEVClc;
GetBitContext *gb    = &lc->gb;
int ctb_addr_ts, ret;

ret = init_get_bits8(gb, nal, length);
if (ret < 0)
return ret;

ret = hls_nal_unit(s);
if (ret < 0) {
av_log(s->avctx, AV_LOG_ERROR, "Invalid NAL unit %d, skipping.\n",
s->nal_unit_type);
goto fail;
} else if (!ret)
return 0;

switch (s->nal_unit_type) {
case NAL_VPS:
//解析VPS
ret = ff_hevc_decode_nal_vps(s);
if (ret < 0)
goto fail;
break;
case NAL_SPS:
//解析SPS
ret = ff_hevc_decode_nal_sps(s);
if (ret < 0)
goto fail;
break;
case NAL_PPS:
//解析PPS
ret = ff_hevc_decode_nal_pps(s);
if (ret < 0)
goto fail;
break;
case NAL_SEI_PREFIX:
case NAL_SEI_SUFFIX:
//解析SEI
ret = ff_hevc_decode_nal_sei(s);
if (ret < 0)
goto fail;
break;
case NAL_TRAIL_R:
case NAL_TRAIL_N:
case NAL_TSA_N:
case NAL_TSA_R:
case NAL_STSA_N:
case NAL_STSA_R:
case NAL_BLA_W_LP:
case NAL_BLA_W_RADL:
case NAL_BLA_N_LP:
case NAL_IDR_W_RADL:
case NAL_IDR_N_LP:
case NAL_CRA_NUT:
case NAL_RADL_N:
case NAL_RADL_R:
case NAL_RASL_N:
case NAL_RASL_R:
//解析Slice
//解析Slice Header
ret = hls_slice_header(s);
if (ret < 0)
return ret;

if (s->max_ra == INT_MAX) {
if (s->nal_unit_type == NAL_CRA_NUT || IS_BLA(s)) {
s->max_ra = s->poc;
} else {
if (IS_IDR(s))
s->max_ra = INT_MIN;
}
}

if ((s->nal_unit_type == NAL_RASL_R || s->nal_unit_type == NAL_RASL_N) &&
s->poc <= s->max_ra) {
s->is_decoded = 0;
break;
} else {
if (s->nal_unit_type == NAL_RASL_R && s->poc > s->max_ra)
s->max_ra = INT_MIN;
}

if (s->sh.first_slice_in_pic_flag) {
ret = hevc_frame_start(s);
if (ret < 0)
return ret;
} else if (!s->ref) {
av_log(s->avctx, AV_LOG_ERROR, "First slice in a frame missing.\n");
goto fail;
}

if (s->nal_unit_type != s->first_nal_type) {
av_log(s->avctx, AV_LOG_ERROR,
"Non-matching NAL types of the VCL NALUs: %d %d\n",
s->first_nal_type, s->nal_unit_type);
return AVERROR_INVALIDDATA;
}

if (!s->sh.dependent_slice_segment_flag &&
s->sh.slice_type != I_SLICE) {
ret = ff_hevc_slice_rpl(s);
if (ret < 0) {
av_log(s->avctx, AV_LOG_WARNING,
"Error constructing the reference lists for the current slice.\n");
goto fail;
}
}
//解码 Slice Data
if (s->threads_number > 1 && s->sh.num_entry_point_offsets > 0)
ctb_addr_ts = hls_slice_data_wpp(s, nal, length);
else
ctb_addr_ts = hls_slice_data(s);
if (ctb_addr_ts >= (s->sps->ctb_width * s->sps->ctb_height)) {
s->is_decoded = 1;
}

if (ctb_addr_ts < 0) {
ret = ctb_addr_ts;
goto fail;
}
break;
case NAL_EOS_NUT:
case NAL_EOB_NUT:
s->seq_decode = (s->seq_decode + 1) & 0xff;
s->max_ra     = INT_MAX;
break;
case NAL_AUD:
case NAL_FD_NUT:
break;
default:
av_log(s->avctx, AV_LOG_INFO,
"Skipping NAL unit %d\n", s->nal_unit_type);
}

return 0;
fail:
if (s->avctx->err_recognition & AV_EF_EXPLODE)
return ret;
return 0;
}

从源代码可以看出，decode_nal_unit()根据不同的NALU类型调用了不同的处理函数。这些处理函数可以分为两类——解析函数和解码函数，如下所示。
（2）解码函数（解码得到图像）：其中解析函数在文章《FFmpeg的HEVC解码器源代码简单分析：解析器（Parser）部分》已经有过介绍，就不再重复叙述了。解码函数hls_slice_data()完成了解码Slice的工作，下面看一下该函数的定义。

hls_slice_data()

hls_slice_data()用于解码Slice Data。该函数的定义如下所示。

//解码Slice Data
static int hls_slice_data(HEVCContext *s)
{
int arg[2];
int ret[2];

arg[0] = 0;
arg[1] = 1;
//解码入口函数
s->avctx->execute(s->avctx, hls_decode_entry, arg, ret , 1, sizeof(int));
return ret[0];
}

可以看出该函数的源代码很简单，调用了另一个函数hls_decode_entry()。

hls_decode_entry()

hls_decode_entry()是Slice Data解码的入口函数。该函数的定义如下所示。

/*
* 解码入口函数
*
* 注释：雷霄骅
* leixiaohua1020@126.com
* http://blog.csdn.net/leixiaohua1020 *
*/
static int hls_decode_entry(AVCodecContext *avctxt, void *isFilterThread)
{
HEVCContext *s  = avctxt->priv_data;
//CTB尺寸
int ctb_size    = 1 << s->sps->log2_ctb_size;
int more_data   = 1;
int x_ctb       = 0;
int y_ctb       = 0;
int ctb_addr_ts = s->pps->ctb_addr_rs_to_ts[s->sh.slice_ctb_addr_rs];

if (!ctb_addr_ts && s->sh.dependent_slice_segment_flag) {
av_log(s->avctx, AV_LOG_ERROR, "Impossible initial tile.\n");
return AVERROR_INVALIDDATA;
}

if (s->sh.dependent_slice_segment_flag) {
int prev_rs = s->pps->ctb_addr_ts_to_rs[ctb_addr_ts - 1];
if (s->tab_slice_address[prev_rs] != s->sh.slice_addr) {
av_log(s->avctx, AV_LOG_ERROR, "Previous slice segment missing\n");
return AVERROR_INVALIDDATA;
}
}

while (more_data && ctb_addr_ts < s->sps->ctb_size) {
int ctb_addr_rs = s->pps->ctb_addr_ts_to_rs[ctb_addr_ts];
//CTB的位置x和y
x_ctb = (ctb_addr_rs % ((s->sps->width + ctb_size - 1) >> s->sps->log2_ctb_size)) << s->sps->log2_ctb_size;
y_ctb = (ctb_addr_rs / ((s->sps->width + ctb_size - 1) >> s->sps->log2_ctb_size)) << s->sps->log2_ctb_size;
//初始化周围的参数
hls_decode_neighbour(s, x_ctb, y_ctb, ctb_addr_ts);
//初始化CABAC
ff_hevc_cabac_init(s, ctb_addr_ts);
//样点自适应补偿参数
hls_sao_param(s, x_ctb >> s->sps->log2_ctb_size, y_ctb >> s->sps->log2_ctb_size);

s->deblock[ctb_addr_rs].beta_offset = s->sh.beta_offset;
s->deblock[ctb_addr_rs].tc_offset   = s->sh.tc_offset;
s->filter_slice_edges[ctb_addr_rs]  = s->sh.slice_loop_filter_across_slices_enabled_flag;
/*
* CU示意图
*
* 64x64块
*
* 深度d=0
* split_flag=1时候划分为4个32x32
*
* +--------+--------+--------+--------+--------+--------+--------+--------+
* |                                                                       |
* |                                   |                                   |
* |                                                                       |
* +                                   |                                   +
* |                                                                       |
* |                                   |                                   |
* |                                                                       |
* +                                   |                                   +
* |                                                                       |
* |                                   |                                   |
* |                                                                       |
* +                                   |                                   +
* |                                                                       |
* |                                   |                                   |
* |                                                                       |
* + --  --  --  --  --  --  --  --  --+ --  --  --  --  --  --  --  --  --+
* |                                   |                                   |
* |                                                                       |
* |                                   |                                   |
* +                                                                       +
* |                                   |                                   |
* |                                                                       |
* |                                   |                                   |
* +                                                                       +
* |                                   |                                   |
* |                                                                       |
* |                                   |                                   |
* +                                                                       +
* |                                   |                                   |
* |                                                                       |
* |                                   |                                   |
* +--------+--------+--------+--------+--------+--------+--------+--------+
*
*
* 32x32 块
* 深度d=1
* split_flag=1时候划分为4个16x16
*
* +--------+--------+--------+--------+
* |                                   |
* |                 |                 |
* |                                   |
* +                 |                 +
* |                                   |
* |                 |                 |
* |                                   |
* + --  --  --  --  + --  --  --  --  +
* |                                   |
* |                 |                 |
* |                                   |
* +                 |                 +
* |                                   |
* |                 |                 |
* |                                   |
* +--------+--------+--------+--------+
*
*
* 16x16 块
* 深度d=2
* split_flag=1时候划分为4个8x8
*
* +--------+--------+
* |                 |
* |        |        |
* |                 |
* +  --  --+ --  -- +
* |                 |
* |        |        |
* |                 |
* +--------+--------+
*
*
* 8x8块
* 深度d=3
* split_flag=1时候划分为4个4x4
*
* +----+----+
* |    |    |
* + -- + -- +
* |    |    |
* +----+----+
*
*/
/*
* 解析四叉树结构，并且解码
*
* hls_coding_quadtree(HEVCContext *s, int x0, int y0, int log2_cb_size, int cb_depth)中：
* s：HEVCContext上下文结构体
* x_ctb：CB位置的x坐标
* y_ctb：CB位置的y坐标
* log2_cb_size：CB大小取log2之后的值
* cb_depth：深度
*
*/
more_data = hls_coding_quadtree(s, x_ctb, y_ctb, s->sps->log2_ctb_size, 0);
if (more_data < 0) {
s->tab_slice_address[ctb_addr_rs] = -1;
return more_data;
}

ctb_addr_ts++;
//保存解码信息以供下次使用
ff_hevc_save_states(s, ctb_addr_ts);
//去块效应滤波
ff_hevc_hls_filters(s, x_ctb, y_ctb, ctb_size);
}

if (x_ctb + ctb_size >= s->sps->width &&
y_ctb + ctb_size >= s->sps->height)
ff_hevc_hls_filter(s, x_ctb, y_ctb, ctb_size);

return ctb_addr_ts;
}

从源代码可以看出，hls_decode_entry()以CTB为单位处理输入的视频流。每个CTB的压缩数据经过下面两个基本步骤进行处理：
hls_decode_entry()的函数调用关系如下图所示。后续的几篇文章将会对其调用的函数进行分析。



至此，FFmpeg HEVC解码器的主干部分的源代码就分析完毕了。

雷霄骅
leixiaohua1020@126.com http://blog.csdn.net/leixiaohua1020