(二)NS3如何编译、运行脚本和 Command Line命令行参数设置
2015-04-28 16:44
726 查看
二、编译、运行脚本和Command Line命令行参数设置
7. 编译和运行脚本主要步骤
1) 将编写的脚本复制到ns-3.22/scratch目录下(可以在ubuntu窗口界面直接复制)进入ns3目录: /ns-3.22
$ cp examples/tutorial/first.cc scratch/myfirst.cc将脚本复制到scratch目录下
2) 构建(编译)
$ ./waf
3) 运行
$ ./waf --run scratch/myfirst
(可能会有运行权限问题,可在root下运行)
7.1 ns3中first.cc例子注释
//first.cc: 2个节点间的点到点通信 //头文件包含 #include "ns3/core-module.h" #include "ns3/network-module.h" #include "ns3/internet-module.h" #include "ns3/point-to-point-module.h" #include "ns3/applications-module.h" //ns3命名空间 using namespace ns3; //日志定义 NS_LOG_COMPONENT_DEFINE ("FirstScriptExample"); //主函数 int main (int argc, char *argv[]) { //时间分辨率 Time::SetResolution (Time::NS); //使日志组件生效:组件--UdpEchoClientApplication--级别INFO LogComponentEnable ("UdpEchoClientApplication", LOG_LEVEL_INFO); LogComponentEnable ("UdpEchoServerApplication", LOG_LEVEL_INFO); //********生成网络节点******** // 可以简单看成部分掏空通信部分内容的计算机,可以加入协议栈、应用及外设的网卡等。 //节点容器类(包含许多方法):是一个helper帮助类,能够一次操作多个节点。 //如:利用其对象(变量)作为设备helper类对象的参数,可以一次在安装设备到多个节点。 NodeContainer nodes; nodes.Create (2);//利用该容器类的创建节点方法,创建两个节点 //********物理连接计算机******** // 抽象:物理实体=网络设备+信道,两者一一对应。 PointToPointHelper pointToPoint;//点到点通信助手类,通过所包含方法能设置网络设备和信道属性 pointToPoint.SetDeviceAttribute ("DataRate", StringValue ("5Mbps"));//调用成员函数 pointToPoint.SetChannelAttribute ("Delay", StringValue ("2ms")); //网络设备容器,即安装了网络设备和信道的节点 NetDeviceContainer devices; devices = pointToPoint.Install (nodes); //********安装协议栈********// InternetStackHelper stack;//网络协议栈帮助类。属于拓扑帮助类 stack.Install (nodes);//为每个节点安装协议栈,IP层 //ipv4地址帮助类,属于拓扑帮助类 Ipv4AddressHelper address; address.SetBase ("10.1.1.0", "255.255.255.0"); //ipv4接口容器类,为了以后引用方便,给网络设备容器类配置地址。结果存在ipv4接口容器类的对象中。 Ipv4InterfaceContainer interfaces = address.Assign (devices); //********安装应用层********// // UDP服务器设置 UdpEchoServerHelper echoServer (9); ApplicationContainer serverApps = echoServer.Install (nodes.Get (1)); serverApps.Start (Seconds (1.0)); serverApps.Stop (Seconds (10.0)); // UDP客户机 UdpEchoClientHelper echoClient (interfaces.GetAddress (1), 9);//远端服务器地址和端口 echoClient.SetAttribute ("MaxPackets", UintegerValue (1)); echoClient.SetAttribute ("Interval", TimeValue (Seconds (1.0))); echoClient.SetAttribute ("PacketSize", UintegerValue (1024)); ApplicationContainer clientApps = echoClient.Install (nodes.Get (0)); clientApps.Start (Seconds (2.0)); clientApps.Stop (Seconds (10.0)); //没有加入Simulation::Stop(Seconds(11.0));仿真结束时间 //因为first.cc例子的事件队列中事件会自动操作完; //对于一直有事件产生的仿真(类似操作系统),必须设置仿真结束时间 Simulator::Run (); Simulator::Destroy (); return 0; }
7.2 CommandLine命令行参数
仿真一般是为了收集各种不同条件下的数据,常常需要改变一些变量。NS-3提供了Command Line参数接口,可以在运行时对脚本中的变量进行设置,免去了每次更改变量后要重新编译和构建脚本的麻烦。1) 修改已有属性变量
在脚本中添加语句int main (int argc, char *argv[])
{
...
CommandLine cmd;
cmd.Parse (argc, argv);//将命令行输入的参数作为类CommandLine的参数进行分析
...
}
这样可以在shell中使用某些附加参数如PrintHelp:
$~/ns-3.2.1 > ./waf --run "scratch/example --PrintHelp"
这条命令将会列出example当前可用的命令参数:
Entering directory '/home/craigdo/repos/ns-3-dev/build'
Compilation finished successfully
--PrintHelp: Print this help message.
--PrintGroups: Print the list of groups.
--PrintTypeIds: Print all TypeIds.
--PrintGroup=[group]: Print all TypeIds of group.
--PrintAttributes=[typeid]: Print all attributes of typeid.
--PrintGlobals: Print the list of globals.
从输出中(倒数第二行)我们知道可以打印某些类的属性:
$~/ns-3.2.1 > ./waf --run "scratch/example --PrintAttributes=ns3::PointToPointNetDevice"
这条命令将会列出类型为PointToPointNetDevice的设备的属性:
--ns3::PointToPointNetDevice::DataRate=[32768bps]:
The default data rate for point topoint links
知道了属性名称,我们也可以使用命令更改这个属性:前提须把脚本中赋值语句注释/删除
$~/ns-3.2.1>./waf--run"scratch/example --ns3::PointToPointNetDevice::DataRate=5Mbps"
2) 添加自己的变量
使用CommandLine::AddValue添加自己的变量,通过钩挂自己的变量将其与命令行相关联,使之成为CommandLine可以使用的参数,在脚本中main函数开始添加
CommandLinecmd;
cmd.AddValue("nPackets","Number of packets to echo", nPackets); //(属性名称,属性说明,变量)
cmd.Parse(argc,argv);
这样在shell中我们可以在命令中更改这个属性:
$~/ns-3.2.1 > ./waf --run "scratch/example --nPackets=2"
参考文献:
[1] http://blog.sina.com.cn/s/articlelist_1923709774_8_1.html [2] ns-3project. ns-3 Software Tutorial. ns-3 project. 2015年2月26日[3] ns-3project. ns-3 Reference Manual. ns-3 project. 2015年2月26日
[4]《ns-3网络模拟器基础及应用》,人民邮电出版社,马春光 姚建盛,2014年1月
部分参考网络资料,未一一列举,敬请原谅!
相关文章推荐
- 编译、运行脚本和Command Line命令行参数设置
- NS3 Command Line Arguments 使用命令行参数改变脚本
- 如何在Windows下开发Python:在cmd下运行Python脚本+如何使用Python Shell(command line模式和GUI模式)+如何使用Python IDE
- 如何从Terminal Command Line编译并运行Scope
- 如何在Windows下开发Python:在cmd下运行Python脚本+如何使用Python Shell(command line模式和GUI模式)+如何使用Python IDE
- 如何从Terminal Command Line编译并运行Scope
- LoadRunner如何在脚本运行时修改log设置选项?
- MyEclipse中如何设置jdk和jre编译运行环境
- 如何判断应用程序运行于GUI模式还是Command Line
- 如何为crontab调度运行的多脚本设置共享的环境变量?
- 使用EduitPlus来设置java编译和运行命令,以及如何用命令来生成java的API注释文档
- crontab详解-如何让脚本自动定时运行,设置、启动 linux定时器
- 如何从windows的command line运行Qt程序
- 如何过Command Line来编译并打包自己的Ubuntu项目
- Java: How to compile and run Java application in command line(在命令行中编译运行java程序)
- NS3编译程序时如何取消把警告当做错误的设置
- 使用NDK编译并运行C++11的Command line命令行程序
- C#中如何获取其他进程的命令行参数 ( How to get other processes's command line argument )
- VS 如何设置编译后的程序可以以管理员身份运行
- VS2013编译生成的程序如何设置以管理员权限运行