How to remove FAP Filter with Galletto 1260
2015-04-18 10:21
776 查看
Note: Carry this out at your own risk !! The method has been tested on Peugeot 406 and 607 without any issues, no smoke, no turbo back pressure !
Worried about having to pay huge repair bills? How about disabling/removing the system all together safely? Well you answer is below.
Let’s go
STEP 1.
To remove FAP/DPF, you first need to read your Engine ECU's original file. This can be done by a Flashtool called Galletto 1260 ecu flasher.
*** Read Galletto 1260 manual:
http://www.eobd2.fr/upload/pro/manuel_eobd2_galletto.pdf
Once you have read the file, save it as original.bin and post it here.
You will recieve a tunned modded file which you can write back to your ECU.
STEP 2. This step is to drill one 2 inch hole through the DPF, forget what most people suggest by drilling 5 holes like a dice, (its a waste of time). The inside of the DPF/FAP is made of ceramic which is exactly same as drilling through a wall/plaster etc (remember to put a mask on!!) I used a core drill (see the following picture) and drilled a whole right through.
Benefits of one 2 inch hole through the DPF/FAP:
No back pressure
Sounds Good
More RPM, mine now goes upto 4000rpm
Good Fuel Economy
Car runs smoother
No risk of carbon buildup
STEP 3 Once you have drilled the hole, all you need to do now is to put the modded file back onto your car.
BEFORE you do this, ensure you have unplugged Differential pressure sensor (leave the pipes intact) just unplug it. Unplug the upstream and downstream temperature sensors so regen doesnt kick in (407's only have downstream sensor)
Write the modded file nodpf.bin onto your car and holla, thats it you are DPF free !!
How is it under €100?
£10 for Galletto
£15 for new copper bolts to go on DPF
£10 for core drill bit
£50 labour for taking the DPF and putting it back on in again
Note: The price will be much cheaper with the time goes by.
Worried about having to pay huge repair bills? How about disabling/removing the system all together safely? Well you answer is below.
Let’s go
STEP 1.
To remove FAP/DPF, you first need to read your Engine ECU's original file. This can be done by a Flashtool called Galletto 1260 ecu flasher.
*** Read Galletto 1260 manual:
http://www.eobd2.fr/upload/pro/manuel_eobd2_galletto.pdf
Once you have read the file, save it as original.bin and post it here.
You will recieve a tunned modded file which you can write back to your ECU.
STEP 2. This step is to drill one 2 inch hole through the DPF, forget what most people suggest by drilling 5 holes like a dice, (its a waste of time). The inside of the DPF/FAP is made of ceramic which is exactly same as drilling through a wall/plaster etc (remember to put a mask on!!) I used a core drill (see the following picture) and drilled a whole right through.
Benefits of one 2 inch hole through the DPF/FAP:
No back pressure
Sounds Good
More RPM, mine now goes upto 4000rpm
Good Fuel Economy
Car runs smoother
No risk of carbon buildup
STEP 3 Once you have drilled the hole, all you need to do now is to put the modded file back onto your car.
BEFORE you do this, ensure you have unplugged Differential pressure sensor (leave the pipes intact) just unplug it. Unplug the upstream and downstream temperature sensors so regen doesnt kick in (407's only have downstream sensor)
Write the modded file nodpf.bin onto your car and holla, thats it you are DPF free !!
How is it under €100?
£10 for Galletto
£15 for new copper bolts to go on DPF
£10 for core drill bit
£50 labour for taking the DPF and putting it back on in again
Note: The price will be much cheaper with the time goes by.
相关文章推荐
- How to remove spaces of a string with regular expression
- How to Assign and Remove Drive Letter with Diskpart?
- Excel Export, how to remove filter buttons etc
- A collection with the function, print one then remove one. how to implement?
- Magento how to remove the catelog filter from the layer navigation?
- How to filter objects by user id with tastypie?
- How to solve “add/remove operation is impossible, because the code element 'Cxxx' is read only” With
- How_To_Build_WebKit_With_VS2005
- How to with 7bit encoding in concatenated sms messages
- How to create id with AUTO_INCREMENT on Oracle?
- How to remove the icon of a WPF window
- How to compile a C/C++ DLL for 64 bit with Visual Studio?
- JS. How to replace html element with another element/text, represented in string?
- Salesforce: How to Send Email with Default Template?
- How to deal with an SVM with categorical attributes?
- How To Install Java on Ubuntu with Apt-Get
- How to crop large photos with Android MediaStore
- android how to deal with data when listview refresh
- How to Get Even with Your Annoying Neighbor by Bumping Them Off Their WiFi Network —Undetected
- How to Enable Accounts with userAccountControl